blob: 855a4718afa24e9a72c96ba5ab57373a6065d304 [file] [log] [blame]
// Copyright 2020 The Wuffs Authors.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
// https://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
// +build ignore
// Deprecated: unused as of commit 695a6815 "Remove gif.config_decoder".
// TODO: consider renaming this from script/preprocess-wuffs.go to
// cmd/wuffspreprocess, making it a "go install"able command line tool.
package main
// preprocess-wuffs.go generates target Wuffs files based on source Wuffs
// files. It is conceptually similar to, but weaker than, the C language's
// preprocessor's #ifdef mechanism. It is a stand-alone tool, not built into
// the Wuffs compiler. It runs relatively infrequently (not at every compile)
// and preprocessed output is checked into the repository.
//
// Preprocessing is separate from compilation, unlike C, for multiple reasons:
//
// - It simplifies the Wuffs language per se, which makes it easier to write
// other tools for Wuffs programs, such as an independent implementation of
// the type checker or a tool that converts from Wuffs programs to the input
// format of a formal verifier.
//
// - Having an explicit file containing the preprocessed output helps keep the
// programmer aware of the cost (increased source size is correlated with
// increased binary size) of generating code. Other programming languages
// make it very easy (in terms of lines of code written and checked in),
// possibly too easy, to produce lots of object code, especiallly when
// monomorphizing favors run-time performance over binary size.
//
// - Writing the generated code to disk can help debug that generated code.
//
// It is the programmer's responsibility to re-run the preprocessor to
// re-generate the target files whenever the source file changes, similar to
// the Go language's "go generate" (https://blog.golang.org/generate).
// Naturally, this can be automated to some extent, e.g. through Makefiles or
// git hooks (when combined with the -fail-on-change flag).
//
// --------
//
// Usage:
//
// go run preprocess-wuffs.go a.wuffs b*.wuffs dir3 dir4
//
// This scans all of the files or directories (recursively, albeit skipping
// dot-files) passed for Wuffs-preprocessor directives (see below). If no files
// or directories are passed, it scans ".", the current working directory.
//
// The optional -fail-on-change flag means to fail (with a non-zero exit code)
// if the target files' contents would change.
//
// --------
//
// Directives:
//
// Preprocessing is line-based, and lines of interest all start with optional
// whitespace and then "//#", slash slash hash, e.g. "//#USE etc".
//
// The first directive must be #USE, which mentions the name of this program
// and then lists the files to generate.
//
// Other directives are grouped into blocks:
// - One or more "#WHEN FOO filename1 filename2" lines, and then
// - One "#DONE FOO" line.
//
// The "FOO" names are arbitrary but must be unique (in a file), preventing
// nested blocks. A good text editor can also quickly cycle through the #WHEN
// and #DONE directives for any given block by searching for that unique name.
// By convention, the names look like "PREPROC123". The "123" suffix is for
// uniqueness. The names' ordering, number-suffixed or not, does not matter.
//
// A #WHEN's filenames detail which target files are active: the subset of the
// #USE directive's filenames that the subsequent lines (up until the next
// #WHEN or #DONE) apply to. A #WHEN's filenames may be empty, in which case
// the subsequent lines are part of the source file but none of the generated
// target files.
//
// A #REPLACE directive adds a simple find/replace filter to the active
// targets, applied to every subsequent generated line. A target may have
// multiple filters, which are applied sequentially. Filters are conceptually
// similar to a sed script, but the mechanism is trivial: for each input line,
// the first exact sub-string match (if any) is replaced.
//
// Lines that aren't directives (that don't start with whitespace then "//#")
// are simply copied (after per-target filtering) to either all active targets
// (when within a block) or to all targets (otherwise).
//
// The ## directive (e.g. "//## apple banana") is, like all directives, a "//"
// comment in the source file, but the "//##" is stripped and the remainder
// ("apple banana") is treated as a non-directive line, copied and filtered per
// the previous paragraph.
//
// For an example, look for "PREPROC" in the std/gif/decode_gif.wuffs file, and
// try "diff std/gif/decode_{gif,config}.wuffs".
import (
"bytes"
"flag"
"fmt"
"io/ioutil"
"os"
"path/filepath"
"runtime"
"sort"
"strings"
"github.com/google/wuffs/lang/render"
t "github.com/google/wuffs/lang/token"
)
var (
focFlag = flag.Bool("fail-on-change", false,
"fail (with a non-zero exit code) if the target files' contents would change")
)
func main() {
if err := main1(); err != nil {
os.Stderr.WriteString(err.Error() + "\n")
os.Exit(1)
}
}
func main1() error {
flag.Parse()
if flag.NArg() == 0 {
if err := filepath.Walk(".", walk); err != nil {
return err
}
} else {
for i := 0; i < flag.NArg(); i++ {
arg := flag.Arg(i)
switch dir, err := os.Stat(arg); {
case err != nil:
return err
case dir.IsDir():
if err := filepath.Walk(arg, walk); err != nil {
return err
}
default:
if err := do(arg); err != nil {
return err
}
}
}
}
sortedFilenames := []string(nil)
for filename := range globalTargets {
sortedFilenames = append(sortedFilenames, filename)
}
sort.Strings(sortedFilenames)
for _, filename := range sortedFilenames {
contents := globalTargets[filename]
if x, err := ioutil.ReadFile(filename); (err == nil) && bytes.Equal(x, contents) {
fmt.Printf("gen unchanged: %s\n", filename)
continue
}
if *focFlag {
return fmt.Errorf("fail-on-change: %s\n", filename)
}
if err := writeFile(filename, contents); err != nil {
return fmt.Errorf("writing %s: %v", filename, err)
}
fmt.Printf("gen wrote: %s\n", filename)
}
return nil
}
func isWuffsFile(info os.FileInfo) bool {
name := info.Name()
return !info.IsDir() && !strings.HasPrefix(name, ".") && strings.HasSuffix(name, ".wuffs")
}
func walk(filename string, info os.FileInfo, err error) error {
if (err == nil) && isWuffsFile(info) {
err = do(filename)
}
// Don't complain if a file was deleted in the meantime (i.e. the directory
// changed concurrently while running this program).
if (err != nil) && !os.IsNotExist(err) {
return err
}
return nil
}
var (
directiveDone = []byte(`//#DONE `)
directiveHash = []byte(`//## `)
directiveReplace = []byte(`//#REPLACE `)
directiveUse = []byte(`//#USE "go run preprocess-wuffs.go" TO MAKE `)
directiveWhen = []byte(`//#WHEN `)
_with_ = []byte(" WITH ")
space = []byte(" ")
// globalTargets map from filenames to contents.
globalTargets = map[string][]byte{}
)
type target struct {
buffer *bytes.Buffer
filters []filter
}
func (t *target) write(s []byte) {
for _, f := range t.filters {
i := bytes.Index(s, f.find)
if i < 0 {
continue
}
x := []byte(nil)
x = append(x, s[:i]...)
x = append(x, f.replace...)
x = append(x, s[i+len(f.find):]...)
s = x
}
t.buffer.Write(s)
}
type filter struct {
find []byte
replace []byte
}
func do(filename string) error {
src, err := ioutil.ReadFile(filename)
if err != nil {
return err
}
if !bytes.Contains(src, directiveUse) {
return nil
}
localTargets := map[string]*target(nil)
activeTargets := []*target(nil)
usedBlockNames := map[string]bool{}
blockName := []byte(nil) // Typically something like "PREPROC123".
prefix := []byte(nil) // Source file contents up to the "//#USE" directive.
for remaining := src; len(remaining) > 0; {
line := remaining
if i := bytes.IndexByte(remaining, '\n'); i >= 0 {
line, remaining = remaining[:i+1], remaining[i+1:]
} else {
remaining = nil
}
ppLine := parsePreprocessorLine(line)
if ppLine == nil {
if localTargets == nil {
prefix = append(prefix, line...)
} else {
for _, t := range activeTargets {
t.write(line)
}
}
continue
}
if bytes.HasPrefix(ppLine, directiveUse) {
if localTargets != nil {
return fmt.Errorf("multiple #USE directives")
}
err := error(nil)
localTargets, err = parseUse(filename, ppLine[len(directiveUse):])
if err != nil {
return err
}
activeTargets = activeTargets[:0]
for _, t := range localTargets {
activeTargets = append(activeTargets, t)
t.write(prefix)
}
prefix = nil
continue
}
if localTargets == nil {
return fmt.Errorf("missing #USE directive")
}
switch {
case bytes.HasPrefix(ppLine, directiveDone):
arg := ppLine[len(directiveDone):]
if blockName == nil {
return fmt.Errorf("bad #DONE directive without #WHEN directive")
} else if !bytes.Equal(blockName, arg) {
return fmt.Errorf("bad directive name: %q", arg)
}
activeTargets = activeTargets[:0]
for _, t := range localTargets {
activeTargets = append(activeTargets, t)
}
blockName = nil
case bytes.HasPrefix(ppLine, directiveHash):
indent := []byte(nil)
if i := bytes.IndexByte(line, '/'); i >= 0 {
indent = line[:i]
}
if blockName == nil {
for _, t := range localTargets {
t.buffer.Write(indent)
t.write(ppLine[len(directiveHash):])
t.buffer.WriteByte('\n')
}
} else {
for _, t := range activeTargets {
t.buffer.Write(indent)
t.write(ppLine[len(directiveHash):])
t.buffer.WriteByte('\n')
}
}
case bytes.HasPrefix(ppLine, directiveReplace):
f := parseReplace(ppLine[len(directiveReplace):])
if (f.find == nil) || (f.replace == nil) {
return fmt.Errorf("bad #REPLACE directive: %q", ppLine)
}
for _, t := range activeTargets {
t.filters = append(t.filters, f)
}
case bytes.HasPrefix(ppLine, directiveWhen):
args := bytes.Split(ppLine[len(directiveWhen):], space)
if len(args) == 0 {
return fmt.Errorf("bad #WHEN directive: %q", ppLine)
}
if blockName == nil {
blockName = args[0]
if bn := string(blockName); usedBlockNames[bn] {
return fmt.Errorf("duplicate directive name: %q", bn)
} else {
usedBlockNames[bn] = true
}
} else if !bytes.Equal(blockName, args[0]) {
return fmt.Errorf("bad directive name: %q", args[0])
}
dir := filepath.Dir(filename)
activeTargets = activeTargets[:0]
for _, arg := range args[1:] {
t := localTargets[filepath.Join(dir, string(arg))]
if t == nil {
return fmt.Errorf("bad #WHEN filename: %q", arg)
}
activeTargets = append(activeTargets, t)
}
default:
return fmt.Errorf("bad directive: %q", ppLine)
}
}
if blockName != nil {
return fmt.Errorf("missing #DONE directive: %q", blockName)
}
for absFilename, t := range localTargets {
globalTargets[absFilename] = wuffsfmt(t.buffer.Bytes())
}
return nil
}
func wuffsfmt(src []byte) []byte {
tm := &t.Map{}
tokens, comments, err := t.Tokenize(tm, "placeholder.filename", src)
if err != nil {
return src
}
dst := &bytes.Buffer{}
if err := render.Render(dst, tm, tokens, comments); err != nil {
return src
}
return dst.Bytes()
}
const chmodSupported = runtime.GOOS != "windows"
func writeFile(filename string, b []byte) error {
f, err := ioutil.TempFile(filepath.Dir(filename), filepath.Base(filename))
if err != nil {
return err
}
if chmodSupported {
if info, err := os.Stat(filename); err == nil {
f.Chmod(info.Mode().Perm())
}
}
_, werr := f.Write(b)
cerr := f.Close()
if werr != nil {
os.Remove(f.Name())
return werr
}
if cerr != nil {
os.Remove(f.Name())
return cerr
}
return os.Rename(f.Name(), filename)
}
func parsePreprocessorLine(line []byte) []byte {
// Look for "//#", slash slash hash.
line = stripLeadingWhitespace(line)
if (len(line) >= 3) && (line[0] == '/') && (line[1] == '/') && (line[2] == '#') {
return bytes.TrimSpace(line)
}
return nil
}
func parseReplace(ppLine []byte) filter {
s0, ppLine := parseString(ppLine)
if s0 == nil {
return filter{}
}
if !bytes.HasPrefix(ppLine, _with_) {
return filter{}
}
ppLine = ppLine[len(_with_):]
s1, ppLine := parseString(ppLine)
if (s1 == nil) || (len(ppLine) != 0) {
return filter{}
}
return filter{
find: s0,
replace: s1,
}
}
func parseString(line []byte) (s []byte, remaining []byte) {
line = stripLeadingWhitespace(line)
if (len(line) == 0) || (line[0] != '"') {
return nil, line
}
line = line[1:]
i := bytes.IndexByte(line, '"')
if i < 0 {
return nil, line
}
if bytes.IndexByte(line[:i], '\\') >= 0 {
return nil, line
}
return line[:i], line[i+1:]
}
func parseUse(srcFilename string, ppLine []byte) (map[string]*target, error) {
absSrcFilename := filepath.Clean(srcFilename)
localTargets := map[string]*target{}
dir := filepath.Dir(srcFilename)
for _, relFilename := range bytes.Split(ppLine, space) {
if len(relFilename) == 0 {
continue
}
if !validFilename(relFilename) {
return nil, fmt.Errorf("invalid filename: %q", string(relFilename))
}
absFilename := filepath.Join(dir, string(relFilename))
if _, ok := globalTargets[absFilename]; ok {
return nil, fmt.Errorf("duplicate filename: %q", absFilename)
}
if absFilename == absSrcFilename {
return nil, fmt.Errorf("self-referential filename: %q", absFilename)
}
buf := &bytes.Buffer{}
buf.WriteString(
"// This file was automatically generated by \"preprocess-wuffs.go\".\n\n")
buf.WriteString("// --------\n\n")
localTargets[absFilename] = &target{buffer: buf}
}
return localTargets, nil
}
func stripLeadingWhitespace(s []byte) []byte {
for (len(s) > 0) && (s[0] <= ' ') {
s = s[1:]
}
return s
}
func validFilename(s []byte) bool {
if (len(s) == 0) || (s[0] == '.') {
return false
}
for _, c := range s {
if (c <= ' ') || (c == '/') || (c == '\\') || (c == ':') {
return false
}
}
return true
}