tree: 0fa4912225461dd6e818a48d2b2549d183fe1f95 [path history] [tgz]
  1. common_consts.wuffs
  2. decode_gif.wuffs
  3. decode_quirks.wuffs
  4. README.md
std/gif/README.md

GIF

GIF (Graphics Interchange Format) is an image compression format for paletted still and animated images. It is specified in the GIF89a specification.

Wire Format Worked Example

Consider test/data/bricks-nodither.gif.

offset  xoffset ASCII   hex     binary
000000  0x0000  G       0x47    0b_0100_0111
000001  0x0001  I       0x49    0b_0100_1001
000002  0x0002  F       0x46    0b_0100_0110
000003  0x0003  8       0x38    0b_0011_1000
000004  0x0004  9       0x39    0b_0011_1001
000005  0x0005  a       0x61    0b_0110_0001
000006  0x0006  .       0xA0    0b_1010_0000
000007  0x0007  .       0x00    0b_0000_0000
000008  0x0008  x       0x78    0b_0111_1000
etc
014230  0x3796  .       0xD3    0b_1101_0011
014231  0x3797  .       0x02    0b_0000_0010
014232  0x3798  .       0x06    0b_0000_0110
014233  0x3799  .       0x04    0b_0000_0100
014234  0x379A  .       0x00    0b_0000_0000
014235  0x379B  ;       0x3B    0b_0011_1011

Starting at the top, a magic identifier, either “GIF87a” or “GIF89a”. In theory, some decoders can only handle the 1987 flavor. In practice, support for the 1989 flavor is ubiquitous. Anyway, the magic ID is:

offset  xoffset ASCII   hex     binary
000000  0x0000  G       0x47    0b_0100_0111
000001  0x0001  I       0x49    0b_0100_1001
000002  0x0002  F       0x46    0b_0100_0110
000003  0x0003  8       0x38    0b_0011_1000
000004  0x0004  9       0x39    0b_0011_1001
000005  0x0005  a       0x61    0b_0110_0001

Logical Screen Descriptor

The Logical Screen Descriptor is at least 7 bytes long:

offset  xoffset ASCII   hex     binary
000006  0x0006  .       0xA0    0b_1010_0000
000007  0x0007  .       0x00    0b_0000_0000
000008  0x0008  x       0x78    0b_0111_1000
000009  0x0009  .       0x00    0b_0000_0000
000010  0x000A  .       0xF7    0b_1111_0111
000011  0x000B  .       0x00    0b_0000_0000
000012  0x000C  .       0x00    0b_0000_0000

The image size is 0x00A0 by 0x0078 pixels, or 160 by 120. The fifth byte is flags, the sixth is the background color index, the seventh is ignored.

The high bit (0x80) and low three bits (0x07) of the flags indicate that we have a GCT (Global Color Table) and that it contains 1<<(7+1), or 256, elements. Global means that it applies to each frame in the possibly animated image unless a per-frame Local Color Table overrides it, and Color Table means a palette of up to 256 RGB (Red, Green, Blue) triples. That GCT follows immediately:

offset  xoffset ASCII   hex     binary
000013  0x000D  .       0x01    0b_0000_0001
000014  0x000E  .       0x03    0b_0000_0011
000015  0x000F  .       0x04    0b_0000_0100
000016  0x0010  .       0x00    0b_0000_0000
000017  0x0011  .       0x0C    0b_0000_1100
000018  0x0012  .       0x03    0b_0000_0011
etc
000250  0x00FA  .       0x01    0b_0000_0001
000251  0x00FB  $       0x24    0b_0010_0100
000252  0x00FC  c       0x63    0b_0110_0011
etc
000673  0x02A1  .       0x0F    0b_0000_1111
000674  0x02A2  .       0xA7    0b_1010_0111
000675  0x02A3  .       0xF6    0b_1111_0110
etc
000778  0x030A  .       0x9F    0b_1001_1111
000779  0x030B  .       0xB8    0b_1011_1000
000780  0x030C  .       0xCD    0b_1100_1101

Thus, color 0 in the palette is the RGB triple {0x01, 0x03, 0x04}, color 1 is {0x00, 0x0C, 0x03}, etc, color 79 is {0x01, 0x24, 0x63}, etc, color 220 is {0x0F, 0xA7, 0xF6}, etc, color 255 is {0x9F, 0xB8, 0xCD}.

Graphic Control Extension

For this particular GIF, next comes an Extension Introducer byte (0x21) for a GCE (Graphic Control Extension) (0xF9), followed by one or more data blocks:

offset  xoffset ASCII   hex     binary
000781  0x030D  !       0x21    0b_0010_0001
000782  0x030E  .       0xF9    0b_1111_1001
000783  0x030F  .       0x04    0b_0000_0100
000784  0x0310  .       0x00    0b_0000_0000
000785  0x0311  .       0x00    0b_0000_0000
000786  0x0312  .       0x00    0b_0000_0000
000787  0x0313  .       0x00    0b_0000_0000
000788  0x0314  .       0x00    0b_0000_0000

The first block has 0x04 payload bytes. After those four bytes, the second block has 0x00 payload bytes, which marks the end of the data blocks. The payload bytes are flags, animation timing and transparency information that, for this simple, opaque, single-frame image, happen to be all zero.

Image Descriptor

Image Descriptors form the bulk of a GIF image. A still image will have one Image Descriptor. An animated image will have many. Image Descriptors begin with an 0x2C byte, followed by at least nine more bytes for the {left, top, width, height} of this frame relative to the overall (potentially animated) image, plus a flags byte:

offset  xoffset ASCII   hex     binary
000789  0x0315  ,       0x2C    0b_0010_1100
000790  0x0316  .       0x00    0b_0000_0000
000791  0x0317  .       0x00    0b_0000_0000
000792  0x0318  .       0x00    0b_0000_0000
000793  0x0319  .       0x00    0b_0000_0000
000794  0x031A  .       0xA0    0b_1010_0000
000795  0x031B  .       0x00    0b_0000_0000
000796  0x031C  x       0x78    0b_0111_1000
000797  0x031D  .       0x00    0b_0000_0000
000798  0x031E  .       0x00    0b_0000_0000

The frame‘s origin is {0x0000, 0x0000} and its extent is {0x00A0, 0x0078}. The flags byte indicates a non-interlaced frame and that no LCT (Local Color Table) overrides the GCT. After the (lack of) LCT comes the LZW (Lempel Ziv Welch) compression’s log2(literal_width), discussed further below.

offset  xoffset ASCII   hex     binary
000799  0x031F  .       0x08    0b_0000_1000

Pixel Data

Pixel data from the bulk of an Image Descriptor. Just like the GCE format, the payload is framed as a sequence of blocks, each block starting with a single byte count of the remaining bytes in the block, and the final block containing only a 0x00 byte.

offset  xoffset ASCII   hex     binary
000800  0x0320  .       0xFE    0b_1111_1110
000801  0x0321  .       0x00    0b_0000_0000
000802  0x0322  .       0xB9    0b_1011_1001
000803  0x0323  .       0x09    0b_0000_1001
000804  0x0324  .       0x14    0b_0001_0100
000805  0x0325  .       0x98    0b_1001_1000
etc
001053  0x041D  6       0x36    0b_0011_0110
001054  0x041E  .       0x1E    0b_0001_1110
001055  0x041F  .       0xFE    0b_1111_1110
001056  0x0420  J       0x4A    0b_0100_1010
001057  0x0421  .       0xA4    0b_1010_0100
etc
001308  0x051C  .       0x1F    0b_0001_1111
001309  0x051D  .       0x81    0b_1000_0001
001310  0x051E  .       0xFE    0b_1111_1110
001311  0x051F  5       0x35    0b_0011_0101
001312  0x0520  ]       0x5D    0b_0101_1101
etc
etc
etc
013803  0x35EB  n       0x6E    0b_0110_1110
013804  0x35EC  .       0xD7    0b_1101_0111
013805  0x35ED  .       0xFE    0b_1111_1110
013806  0x35EE  .       0x17    0b_0001_0111
013807  0x35EF  .       0xB4    0b_1011_0100
etc
014058  0x36EA  .       0xDB    0b_1101_1011
014059  0x36EB  g       0x67    0b_0110_0111
014060  0x36EC  .       0xAD    0b_1010_1101
014061  0x36ED  .       0x81    0b_1000_0001
014062  0x36EE  .       0xD6    0b_1101_0110
etc
014232  0x3798  .       0x06    0b_0000_0110
014233  0x3799  .       0x04    0b_0000_0100
014234  0x379A  .       0x00    0b_0000_0000

The specification allows for the block count to be 0xFF, but for whatever reason, the ImageMagick encoder and its command-line convert tool generated slightly shorter blocks, with lengths 0xFE, 0xFE, 0xFE, ..., 0xFE, 0xAD, 0x00.

The payload wrapped by these block counts are LZW compressed, discussed below.

Trailer

The final byte is 0x3B.

offset  xoffset ASCII   hex     binary
014235  0x379B  ;       0x3B    0b_0011_1011

LZW (Lempel Ziv Welch) Compression

See std/lzw/README.md for a description of LZW: a general purpose compression algorithm. Below is a detailed decoding of the LZW data from the Wire Format Worked Example, deconstructed above.

It is not an official format, but the test/data/bricks-nodither.indexes.giflzw file contains the extracted “Pixel Data” payload from test/data/bricks-nodither.gif, preceded by the one byte log2(literal_width). Deriving a separate file, as a separate, contiguous stream, makes it easier to discuss the LZW compression format.

offset  xoffset ASCII   hex     binary
000000  0x0000  .       0x08    0b_0000_1000
000001  0x0001  .       0x00    0b_0000_0000
000002  0x0002  .       0xB9    0b_1011_1001
000003  0x0003  .       0x09    0b_0000_1001
000004  0x0004  .       0x14    0b_0001_0100
000005  0x0005  .       0x98    0b_1001_1000
000006  0x0006  .       0xAD    0b_1010_1101
000007  0x0007  ^       0x5E    0b_0101_1110
000008  0x0008  >       0x3E    0b_0011_1110
000009  0x0009  {       0x7B    0b_0111_1011
000010  0x000A  .       0xDF    0b_1101_1111
000011  0x000B  .       0xB8    0b_1011_1000
000012  0x000C  }       0x7D    0b_0111_1101
000013  0x000D  .       0xC9    0b_1100_1001
000014  0x000E  .       0xA1    0b_1010_0001
000015  0x000F  .       0xA3    0b_1010_0011
000016  0x0010  a       0x61    0b_0110_0001
000017  0x0011  .       0xC3    0b_1100_0011
000018  0x0012  0       0x30    0b_0011_0000
etc
000253  0x00FD  6       0x36    0b_0011_0110
000254  0x00FE  .       0x1E    0b_0001_1110
000255  0x00FF  J       0x4A    0b_0100_1010
000256  0x0100  .       0xA4    0b_1010_0100
etc
000507  0x01FB  .       0x1F    0b_0001_1111
000508  0x01FC  .       0x81    0b_1000_0001
000509  0x01FD  5       0x35    0b_0011_0101
000510  0x01FE  ]       0x5D    0b_0101_1101
etc
etc
etc
012953  0x3299  n       0x6E    0b_0110_1110
012954  0x329A  .       0xD7    0b_1101_0111
012955  0x329B  .       0x17    0b_0001_0111
012956  0x329C  .       0xB4    0b_1011_0100
etc
013207  0x3397  .       0xDB    0b_1101_1011
013208  0x3398  g       0x67    0b_0110_0111
013209  0x3399  .       0x81    0b_1000_0001
013210  0x339A  .       0xD6    0b_1101_0110
etc
013380  0x3444  .       0x06    0b_0000_0110
013381  0x3445  .       0x04    0b_0000_0100

Codes

LZW consists of a sequence of code values, in the range [0, max] inclusive. Each code decodes to either a literal value (one byte), a back-reference (multiple bytes), a ‘clear code’ (discussed below), or indicates the end of the data stream.

The first 1<<l2lw codes are literal codes, where l2lw is the log2(literal_width) mentioned above. For GIF's flavor of LZW, valid l2lw values are between 2 and 8 inclusive.

For example, if l2lw == 8, then the first 256 codes are literal codes: the 0 code decodes one 0x00 byte, the 1 code decodes one 0x01 byte, etc. The next code (256) is the clear code and the next code after that (257) is the end code. Any code higher than that denotes a back-reference, but any code above the current max value is invalid.

max's initial value is the same as the end code, and it increases by 1 with each code consumed, up until max == 4095. A clear code resets max to its initial value, and clears the meaning of higher back-reference codes.

Codes take up a variable number of bits in the input stream, the width, depending on max. For example, if max is in the range [256, 511] then the next code takes 9 bits, if max is in the range [512, 1023] then width == 10, and so on. For GIF, when a code spans multiple bytes, codes are formed Least Significant Bits first. For the test/data/bricks-nodither.indexes.giflzw example, l2lw == 8 and so width starts at 9 bits. Printing the bits on byte boundaries give:

offset  xoffset ASCII   hex     binary
000001  0x0001  .       0x00    0b_0000_0000
000002  0x0002  .       0xB9    0b_1011_1001
000003  0x0003  .       0x09    0b_0000_1001
000004  0x0004  .       0x14    0b_0001_0100
000005  0x0005  .       0x98    0b_1001_1000
000006  0x0006  .       0xAD    0b_1010_1101
000007  0x0007  ^       0x5E    0b_0101_1110
000008  0x0008  >       0x3E    0b_0011_1110
000009  0x0009  {       0x7B    0b_0111_1011
000010  0x000A  .       0xDF    0b_1101_1111
000011  0x000B  .       0xB8    0b_1011_1000
000012  0x000C  }       0x7D    0b_0111_1101
000013  0x000D  .       0xC9    0b_1100_1001
000014  0x000E  .       0xA1    0b_1010_0001
000015  0x000F  .       0xA3    0b_1010_0011
000016  0x0010  a       0x61    0b_0110_0001
000017  0x0011  .       0xC3    0b_1100_0011
000018  0x0012  0       0x30    0b_0011_0000
etc
000147  0x0093  >       0x3E    0b_0011_1110
000148  0x0094  .       0xC4    0b_1100_0100
etc
000286  0x011E  _       0x5F    0b_0101_1111
000287  0x011F  .       0xEA    0b_1110_1010
000288  0x0120  .       0x9C    0b_1001_1100
000289  0x0121  .       0xFC    0b_1111_1100
000290  0x0122  .       0xD4    0b_1101_0100
000291  0x0123  .       0xA4    0b_1010_0100
etc
005407  0x151F  .       0xBB    0b_1011_1011
005408  0x1520  .       0xFB    0b_1111_1011
005409  0x1521  .       0x00    0b_0000_0000
005410  0x1522  .       0xE1    0b_1110_0001
005411  0x1523  .       0xA1    0b_1010_0001
005412  0x1524  .       0xC3    0b_1100_0011
005413  0x1525  @       0x40    0b_0100_0000
etc
013378  0x3442  .       0xD3    0b_1101_0011
013379  0x3443  .       0x02    0b_0000_0010
013380  0x3444  .       0x06    0b_0000_0110
013381  0x3445  .       0x04    0b_0000_0100

and on code boundaries give:

binary                              width   code
0b_...._...._...._...1_0000_0000     9      0x0100
0b_...._...._...._..01_1011_100.     9      0x00DC
0b_...._...._...._.100_0000_10..     9      0x0102
0b_...._...._...._1000_0001_0...     9      0x0102
0b_...._...._...0_1101_1001_....     9      0x00D9
0b_...._...._..01_1110_101._....     9      0x00F5
0b_...._...._.011_1110_01.._....     9      0x00F9
0b_...._...._0111_1011_0..._....     9      0x00F6
0b_...._...._...._...0_1101_1111     9      0x00DF
0b_...._...._...._..01_1011_100.     9      0x00DC
0b_...._...._...._.001_0111_11..     9      0x005F
0b_...._...._...._0001_1100_1...     9      0x0039
0b_...._...._...0_0011_1010_....     9      0x003A
0b_...._...._..10_0001_101._....     9      0x010D
0b_...._...._.100_0011_01.._....     9      0x010D
0b_...._...._0011_0000_1..._....     9      0x0061
etc
0b_...._...._...._.100_0011_11..     9      0x010F
etc
0b_...._...._.110_1010_01.._....     9      0x01A9
0b_...._...._1001_1100_1..._....     9      0x0139
0b_...._...._...._..00_1111_1100    10      0x00FC  (implicit width increase)
0b_...._...._...._0100_1101_01..    10      0x0135
etc
0b_...._...._1111_1011_1011_....    12      0x0FBB
0b_...._...._...._0001_0000_0000    12      0x0100  (code == 0x0100 means clear)
0b_...._...._...0_0001_1110_....     9      0x001E  (explicit width reset)
0b_...._...._..00_0011_101._....     9      0x001D
0b_...._...._.100_0000_11.._....     9      0x0103
etc
0b_...._..10_0000_0010_11.._....    12      0x080B
0b_...._...._..00_0100_0000_01..    12      0x0101

The implicit width increase is because max ticked over from 0x01FF to 0x200. Processing these codes give:

code      meaning   max     output
0x0100    clear     0x0101  .
0x00DC    literal   0x0101  0xDC
0x0102    back-ref  0x0102  0xDC 0xDC
0x0102    back-ref  0x0103  0xDC 0xDC
0x00D9    literal   0x0104  0xD9
0x00F5    literal   0x0105  0xF5
0x00F9    literal   0x0106  0xF9
0x00F6    literal   0x0107  0xF6
0x00DF    literal   0x0108  0xDF
0x00DC    literal   0x0109  0xDC
0x005F    literal   0x010A  0x5F
0x0039    literal   0x010B  0x39
0x003A    literal   0x010C  0x3A
0x010D    back-ref  0x010D  0x3A 0x3A
0x010D    back-ref  0x010E  0x3A 0x3A
0x0061    literal   0x010F  0x61
etc
0x010F    back-ref  0x0182  0x3A 0x3A 0x61
etc
0x01A9    back-ref  0x01FE  0xFB 0xFB 0xFB 0xFB
0x0139    back-ref  0x01FF  0xFB 0xFC
0x00FC    literal   0x0200  0xFC
0x0135    back-ref  0x0201  0xFA 0xFA
etc
0x0FBB    back-ref  0x0FFF  0xC1 0xC1 0xC1 0xC1 0xC1 0xC1 0xDF
0x0100    clear     0x0FFF  .
0x001E    literal   0x0101  0x1E
0x001D    literal   0x0102  0x1D
0x0103    back-ref  0x0103  0x1D 0x1D
etc
0x080B    back-ref  0x0896  0x4F 0x4F 0x4F 0x4F 0x4F
0x0101    end       0x0897  .

The max column here is the max code allowed when processing that row's code. The initial clear code is redundant (as the initial value of max is already 0x0101 here), but some encoders produce them because the specification says that “encoders should output a Clear code as the first code of each image data stream”.

Other than clear and end codes, each code produces some output: a variable length prefix and a one byte suffix. For literal codes, the prefix is empty and the suffix is the literal.

When max is greater than the end code (e.g. greater than 0x0101), the row defines a new back-reference, and that definition persists up until the next clear code. For example, the third, fourth, fifth, etc. rows define what the 0x0102, 0x0103, 0x0104, etc. codes output. That code‘s output (prefix + suffix) is defined by the prefix being the previous row’s output and the suffix being the first byte of the current row's output.

For example, the 15th and 16th rows are:

code      meaning   max     output
0x010D    back-ref  0x010E  0x3A 0x3A
0x0061    literal   0x010F  0x61

which defines the 0x010F code to output “0x3A 0x3A 0x61”. Later on, an 0x010F code is encountered, and its output is exactly that.

A row's code can be the code that that row itself defines, in which case the prefix is the previous row and the suffix is the first byte of the previous row. Consider the opening few codes:

code      meaning   max     output
0x0100    clear     0x0101  .
0x00DC    literal   0x0101  0xDC
0x0102    back-ref  0x0102  0xDC 0xDC
0x0102    back-ref  0x0103  0xDC 0xDC
0x00D9    literal   0x0104  0xD9

The third row‘s code is 0x0102, which that row also defines. Its output is therefore the concatenation of “0xDC” and the first byte of “0xDC”, both of those strings being the previous row’s output. The fourth row executes the same 0x0102 code (and outputs “0xDC 0xDC” again) and defines the 0x0103 code. The next code is a literal 0xD9, and hence the decoded output starts with five 0xDC bytes and then an 0xD9.

Actual Pixel Indexes

It is also not an official format, but for reference, the test/data/bricks-nodither.indexes contains the decoded test/data/bricks-nodither.indexes.giflzw data:

offset  xoffset ASCII   hex     binary
000000  0x0000  .       0xDC    0b_1101_1100
000001  0x0001  .       0xDC    0b_1101_1100
000002  0x0002  .       0xDC    0b_1101_1100
000003  0x0003  .       0xDC    0b_1101_1100
000004  0x0004  .       0xDC    0b_1101_1100
000005  0x0005  .       0xD9    0b_1101_1001
000006  0x0006  .       0xF5    0b_1111_0101
000007  0x0007  .       0xF9    0b_1111_1001
000008  0x0008  .       0xF6    0b_1111_0110
000009  0x0009  .       0xDF    0b_1101_1111
000010  0x000A  .       0xDC    0b_1101_1100
000011  0x000B  _       0x5F    0b_0101_1111
000012  0x000C  9       0x39    0b_0011_1001
000013  0x000D  :       0x3A    0b_0011_1010
000014  0x000E  :       0x3A    0b_0011_1010
000015  0x000F  :       0x3A    0b_0011_1010
000016  0x0010  :       0x3A    0b_0011_1010
000017  0x0011  :       0x3A    0b_0011_1010
000018  0x0012  a       0x61    0b_0110_0001
etc
019195  0x4AFB  O       0x4F    0b_0100_1111
019196  0x4AFC  O       0x4F    0b_0100_1111
019197  0x4AFD  O       0x4F    0b_0100_1111
019198  0x4AFE  O       0x4F    0b_0100_1111
019199  0x4AFF  O       0x4F    0b_0100_1111

We have 19200 = 160 × 120 pixels. The top row starts with five pixels with RGB values indexed by 0xDC (or 220 in decimal, and recall that the GCT maps color 220 to {0x0F, 0xA7, 0xF6}), the bottom row ends with index 0x4F.

Indeed, opening test/data/bricks-nodither.gif in an image editor should verify that the top left pixel‘s RGB is {0x0F, 0xA7, 0xF6}, and likewise the bottom right pixel’s RGB is {0x01, 0x24, 0x63}.

More Wire Format Examples

See test/data/artificial/gif-*.commentary.txt