| // Copyright (c) 2015-2016 The Khronos Group Inc. |
| // |
| // Licensed under the Apache License, Version 2.0 (the "License"); |
| // you may not use this file except in compliance with the License. |
| // You may obtain a copy of the License at |
| // |
| // http://www.apache.org/licenses/LICENSE-2.0 |
| // |
| // Unless required by applicable law or agreed to in writing, software |
| // distributed under the License is distributed on an "AS IS" BASIS, |
| // WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. |
| // See the License for the specific language governing permissions and |
| // limitations under the License. |
| |
| #include <algorithm> |
| #include <cassert> |
| #include <iostream> |
| #include <iterator> |
| #include <stack> |
| #include <string> |
| #include <unordered_set> |
| #include <utility> |
| #include <vector> |
| |
| #include "source/diagnostic.h" |
| #include "source/instruction.h" |
| #include "source/opcode.h" |
| #include "source/operand.h" |
| #include "source/spirv_validator_options.h" |
| #include "source/val/function.h" |
| #include "source/val/validate.h" |
| #include "source/val/validation_state.h" |
| #include "spirv-tools/libspirv.h" |
| |
| namespace spvtools { |
| namespace val { |
| |
| spv_result_t UpdateIdUse(ValidationState_t& _, const Instruction* inst) { |
| for (auto& operand : inst->operands()) { |
| const spv_operand_type_t& type = operand.type; |
| const uint32_t operand_id = inst->word(operand.offset); |
| if (spvIsIdType(type) && type != SPV_OPERAND_TYPE_RESULT_ID) { |
| if (auto def = _.FindDef(operand_id)) |
| def->RegisterUse(inst, operand.offset); |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| /// This function checks all ID definitions dominate their use in the CFG. |
| /// |
| /// This function will iterate over all ID definitions that are defined in the |
| /// functions of a module and make sure that the definitions appear in a |
| /// block that dominates their use. |
| /// |
| /// NOTE: This function does NOT check module scoped functions which are |
| /// checked during the initial binary parse in the IdPass below |
| spv_result_t CheckIdDefinitionDominateUse(ValidationState_t& _) { |
| std::vector<const Instruction*> phi_instructions; |
| std::unordered_set<uint32_t> phi_ids; |
| for (const auto& inst : _.ordered_instructions()) { |
| if (inst.id() == 0) continue; |
| if (const Function* func = inst.function()) { |
| if (const BasicBlock* block = inst.block()) { |
| // If the Id is defined within a block then make sure all references to |
| // that Id appear in a blocks that are dominated by the defining block |
| for (auto& use_index_pair : inst.uses()) { |
| const Instruction* use = use_index_pair.first; |
| if (const BasicBlock* use_block = use->block()) { |
| if (use_block->reachable() == false) continue; |
| if (use->opcode() == SpvOpPhi) { |
| if (phi_ids.insert(use->id()).second) { |
| phi_instructions.push_back(use); |
| } |
| } else if (!block->dominates(*use->block())) { |
| return _.diag(SPV_ERROR_INVALID_ID, use_block->label()) |
| << "ID " << _.getIdName(inst.id()) << " defined in block " |
| << _.getIdName(block->id()) |
| << " does not dominate its use in block " |
| << _.getIdName(use_block->id()); |
| } |
| } |
| } |
| } else { |
| // If the Ids defined within a function but not in a block(i.e. function |
| // parameters, block ids), then make sure all references to that Id |
| // appear within the same function |
| for (auto use : inst.uses()) { |
| const Instruction* user = use.first; |
| if (user->function() && user->function() != func) { |
| return _.diag(SPV_ERROR_INVALID_ID, _.FindDef(func->id())) |
| << "ID " << _.getIdName(inst.id()) << " used in function " |
| << _.getIdName(user->function()->id()) |
| << " is used outside of it's defining function " |
| << _.getIdName(func->id()); |
| } |
| } |
| } |
| } |
| // NOTE: Ids defined outside of functions must appear before they are used |
| // This check is being performed in the IdPass function |
| } |
| |
| // Check all OpPhi parent blocks are dominated by the variable's defining |
| // blocks |
| for (const Instruction* phi : phi_instructions) { |
| if (phi->block()->reachable() == false) continue; |
| for (size_t i = 3; i < phi->operands().size(); i += 2) { |
| const Instruction* variable = _.FindDef(phi->word(i)); |
| const BasicBlock* parent = |
| phi->function()->GetBlock(phi->word(i + 1)).first; |
| if (variable->block() && parent->reachable() && |
| !variable->block()->dominates(*parent)) { |
| return _.diag(SPV_ERROR_INVALID_ID, phi) |
| << "In OpPhi instruction " << _.getIdName(phi->id()) << ", ID " |
| << _.getIdName(variable->id()) |
| << " definition does not dominate its parent " |
| << _.getIdName(parent->id()); |
| } |
| } |
| } |
| |
| return SPV_SUCCESS; |
| } |
| |
| // Performs SSA validation on the IDs of an instruction. The |
| // can_have_forward_declared_ids functor should return true if the |
| // instruction operand's ID can be forward referenced. |
| spv_result_t IdPass(ValidationState_t& _, Instruction* inst) { |
| auto can_have_forward_declared_ids = |
| inst->opcode() == SpvOpExtInst && |
| spvExtInstIsDebugInfo(inst->ext_inst_type()) |
| ? spvDbgInfoExtOperandCanBeForwardDeclaredFunction( |
| inst->ext_inst_type(), inst->word(4)) |
| : spvOperandCanBeForwardDeclaredFunction(inst->opcode()); |
| |
| // Keep track of a result id defined by this instruction. 0 means it |
| // does not define an id. |
| uint32_t result_id = 0; |
| |
| for (unsigned i = 0; i < inst->operands().size(); i++) { |
| const spv_parsed_operand_t& operand = inst->operand(i); |
| const spv_operand_type_t& type = operand.type; |
| // We only care about Id operands, which are a single word. |
| const uint32_t operand_word = inst->word(operand.offset); |
| |
| auto ret = SPV_ERROR_INTERNAL; |
| switch (type) { |
| case SPV_OPERAND_TYPE_RESULT_ID: |
| // NOTE: Multiple Id definitions are being checked by the binary parser. |
| // |
| // Defer undefined-forward-reference removal until after we've analyzed |
| // the remaining operands to this instruction. Deferral only matters |
| // for OpPhi since it's the only case where it defines its own forward |
| // reference. Other instructions that can have forward references |
| // either don't define a value or the forward reference is to a function |
| // Id (and hence defined outside of a function body). |
| result_id = operand_word; |
| // NOTE: The result Id is added (in RegisterInstruction) *after* all of |
| // the other Ids have been checked to avoid premature use in the same |
| // instruction. |
| ret = SPV_SUCCESS; |
| break; |
| case SPV_OPERAND_TYPE_ID: |
| case SPV_OPERAND_TYPE_MEMORY_SEMANTICS_ID: |
| case SPV_OPERAND_TYPE_SCOPE_ID: |
| if (const auto def = _.FindDef(operand_word)) { |
| const auto opcode = inst->opcode(); |
| if (spvOpcodeGeneratesType(def->opcode()) && |
| !spvOpcodeGeneratesType(opcode) && !spvOpcodeIsDebug(opcode) && |
| !inst->IsDebugInfo() && !inst->IsNonSemantic() && |
| !spvOpcodeIsDecoration(opcode) && opcode != SpvOpFunction && |
| opcode != SpvOpCooperativeMatrixLengthNV && |
| !(opcode == SpvOpSpecConstantOp && |
| inst->word(3) == SpvOpCooperativeMatrixLengthNV)) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Operand " << _.getIdName(operand_word) |
| << " cannot be a type"; |
| } else if (def->type_id() == 0 && !spvOpcodeGeneratesType(opcode) && |
| !spvOpcodeIsDebug(opcode) && !inst->IsDebugInfo() && |
| !inst->IsNonSemantic() && !spvOpcodeIsDecoration(opcode) && |
| !spvOpcodeIsBranch(opcode) && opcode != SpvOpPhi && |
| opcode != SpvOpExtInst && opcode != SpvOpExtInstImport && |
| opcode != SpvOpSelectionMerge && |
| opcode != SpvOpLoopMerge && opcode != SpvOpFunction && |
| opcode != SpvOpCooperativeMatrixLengthNV && |
| !(opcode == SpvOpSpecConstantOp && |
| inst->word(3) == SpvOpCooperativeMatrixLengthNV)) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Operand " << _.getIdName(operand_word) |
| << " requires a type"; |
| } else if (def->IsNonSemantic() && !inst->IsNonSemantic()) { |
| return _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Operand " << _.getIdName(operand_word) |
| << " in semantic instruction cannot be a non-semantic " |
| "instruction"; |
| } else { |
| ret = SPV_SUCCESS; |
| } |
| } else if (can_have_forward_declared_ids(i)) { |
| if (spvOpcodeGeneratesType(inst->opcode()) && |
| !_.IsForwardPointer(operand_word)) { |
| ret = _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "Operand " << _.getIdName(operand_word) |
| << " requires a previous definition"; |
| } else { |
| ret = _.ForwardDeclareId(operand_word); |
| } |
| } else { |
| ret = _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "ID " << _.getIdName(operand_word) |
| << " has not been defined"; |
| } |
| break; |
| case SPV_OPERAND_TYPE_TYPE_ID: |
| if (_.IsDefinedId(operand_word)) { |
| auto* def = _.FindDef(operand_word); |
| if (!spvOpcodeGeneratesType(def->opcode())) { |
| ret = _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "ID " << _.getIdName(operand_word) << " is not a type id"; |
| } else { |
| ret = SPV_SUCCESS; |
| } |
| } else { |
| ret = _.diag(SPV_ERROR_INVALID_ID, inst) |
| << "ID " << _.getIdName(operand_word) |
| << " has not been defined"; |
| } |
| break; |
| default: |
| ret = SPV_SUCCESS; |
| break; |
| } |
| if (SPV_SUCCESS != ret) return ret; |
| } |
| if (result_id) _.RemoveIfForwardDeclared(result_id); |
| |
| return SPV_SUCCESS; |
| } |
| |
| } // namespace val |
| } // namespace spvtools |