Remove duplicated "the" from comments (#4666)
diff --git a/source/binary.cpp b/source/binary.cpp
index 48a94f1..bbaa2c2 100644
--- a/source/binary.cpp
+++ b/source/binary.cpp
@@ -300,7 +300,7 @@
const uint32_t first_word = peek();
// If the module's endianness is different from the host native endianness,
- // then converted_words contains the the endian-translated words in the
+ // then converted_words contains the endian-translated words in the
// instruction.
_.endian_converted_words.clear();
_.endian_converted_words.push_back(first_word);
diff --git a/source/cfa.h b/source/cfa.h
index 0d09014..7cadf55 100644
--- a/source/cfa.h
+++ b/source/cfa.h
@@ -42,7 +42,7 @@
/// Returns true if a block with @p id is found in the @p work_list vector
///
- /// @param[in] work_list Set of blocks visited in the the depth first
+ /// @param[in] work_list Set of blocks visited in the depth first
/// traversal
/// of the CFG
/// @param[in] id The ID of the block being checked
diff --git a/source/fuzz/fuzzer_context.cpp b/source/fuzz/fuzzer_context.cpp
index c217542..7e34cc3 100644
--- a/source/fuzz/fuzzer_context.cpp
+++ b/source/fuzz/fuzzer_context.cpp
@@ -21,7 +21,7 @@
namespace {
-// An offset between the the module's id bound and the minimum fresh id.
+// An offset between the module's id bound and the minimum fresh id.
//
// TODO(https://github.com/KhronosGroup/SPIRV-Tools/issues/2541): consider
// the case where the maximum id bound is reached.
diff --git a/source/opt/dead_branch_elim_pass.h b/source/opt/dead_branch_elim_pass.h
index 7841bc4..c350bb2 100644
--- a/source/opt/dead_branch_elim_pass.h
+++ b/source/opt/dead_branch_elim_pass.h
@@ -98,7 +98,7 @@
// Fix phis in reachable blocks so that only live (or unremovable) incoming
// edges are present. If the block now only has a single live incoming edge,
// remove the phi and replace its uses with its data input. If the single
- // remaining incoming edge is from the phi itself, the the phi is in an
+ // remaining incoming edge is from the phi itself, the phi is in an
// unreachable single block loop. Either the block is dead and will be
// removed, or it's reachable from an unreachable continue target. In the
// latter case that continue target block will be collapsed into a block that
diff --git a/source/opt/desc_sroa.h b/source/opt/desc_sroa.h
index 383d441..6a24fd8 100644
--- a/source/opt/desc_sroa.h
+++ b/source/opt/desc_sroa.h
@@ -132,7 +132,7 @@
// A map from an OpVariable instruction to the set of variables that will be
// used to replace it. The entry |replacement_variables_[var][i]| is the id of
- // a variable that will be used in the place of the the ith element of the
+ // a variable that will be used in the place of the ith element of the
// array |var|. If the entry is |0|, then the variable has not been
// created yet.
std::map<Instruction*, std::vector<uint32_t>> replacement_variables_;
diff --git a/source/opt/dominator_tree.h b/source/opt/dominator_tree.h
index 0024bc5..1674b22 100644
--- a/source/opt/dominator_tree.h
+++ b/source/opt/dominator_tree.h
@@ -278,7 +278,7 @@
private:
// Wrapper function which gets the list of pairs of each BasicBlocks to its
- // immediately dominating BasicBlock and stores the result in the the edges
+ // immediately dominating BasicBlock and stores the result in the edges
// parameter.
//
// The |edges| vector will contain the dominator tree as pairs of nodes.
diff --git a/source/opt/loop_fission.cpp b/source/opt/loop_fission.cpp
index 0678113..0a4125d 100644
--- a/source/opt/loop_fission.cpp
+++ b/source/opt/loop_fission.cpp
@@ -453,7 +453,7 @@
for (Function& f : *context()->module()) {
// We collect all the inner most loops in the function and run the loop
// splitting util on each. The reason we do this is to allow us to iterate
- // over each, as creating new loops will invalidate the the loop iterator.
+ // over each, as creating new loops will invalidate the loop iterator.
std::vector<Loop*> inner_most_loops{};
LoopDescriptor& loop_descriptor = *context()->GetLoopDescriptor(&f);
for (Loop& loop : loop_descriptor) {
diff --git a/source/opt/register_pressure.cpp b/source/opt/register_pressure.cpp
index 5750c6d..1ad3373 100644
--- a/source/opt/register_pressure.cpp
+++ b/source/opt/register_pressure.cpp
@@ -378,7 +378,7 @@
// The loop fusion is injecting the l1 before the l2, the latch of l1 will be
// connected to the header of l2.
// To compute the register usage, we inject the loop live-in (union of l1 and
- // l2 live-in header blocks) into the the live in/out of each basic block of
+ // l2 live-in header blocks) into the live in/out of each basic block of
// l1 to get the peak register usage. We then repeat the operation to for l2
// basic blocks but in this case we inject the live-out of the latch of l1.
auto live_loop = MakeFilterIteratorRange(
diff --git a/source/opt/scalar_analysis_simplification.cpp b/source/opt/scalar_analysis_simplification.cpp
index 52f2d6a..9c81dbe 100644
--- a/source/opt/scalar_analysis_simplification.cpp
+++ b/source/opt/scalar_analysis_simplification.cpp
@@ -134,7 +134,7 @@
// offset.
SENode* EliminateZeroCoefficientRecurrents(SENode* node);
- // A reference the the analysis which requested the simplification.
+ // A reference the analysis which requested the simplification.
ScalarEvolutionAnalysis& analysis_;
// The node being simplified.
diff --git a/source/opt/strength_reduction_pass.h b/source/opt/strength_reduction_pass.h
index 8dfeb30..1cbbbcc 100644
--- a/source/opt/strength_reduction_pass.h
+++ b/source/opt/strength_reduction_pass.h
@@ -34,7 +34,7 @@
// Returns true if something changed.
bool ReplaceMultiplyByPowerOf2(BasicBlock::iterator*);
- // Scan the types and constants in the module looking for the the integer
+ // Scan the types and constants in the module looking for the integer
// types that we are
// interested in. The shift operation needs a small unsigned integer. We
// need to find
diff --git a/source/val/validate.cpp b/source/val/validate.cpp
index 7655c96..64df67c 100644
--- a/source/val/validate.cpp
+++ b/source/val/validate.cpp
@@ -202,7 +202,7 @@
/* diagnostic = */ nullptr);
// Parse the module and perform inline validation checks. These checks do
- // not require the the knowledge of the whole module.
+ // not require the knowledge of the whole module.
if (auto error = spvBinaryParse(&context, vstate, words, num_words,
/*parsed_header =*/nullptr,
ProcessInstruction, pDiagnostic)) {
diff --git a/source/val/validate_memory.cpp b/source/val/validate_memory.cpp
index a7b0f82..93b1800 100644
--- a/source/val/validate_memory.cpp
+++ b/source/val/validate_memory.cpp
@@ -1411,7 +1411,7 @@
<< state.getIdName(inst->id()) << "' must be an OpTypeRuntimeArray.";
}
- // The array member must the the index of the last element (the run time
+ // The array member must the index of the last element (the run time
// array).
if (inst->GetOperandAs<uint32_t>(3) != num_of_members - 1) {
return state.diag(SPV_ERROR_INVALID_ID, inst)
diff --git a/utils/vscode/src/lsp/protocol/tsprotocol.go b/utils/vscode/src/lsp/protocol/tsprotocol.go
index 50543fc..29dd986 100644
--- a/utils/vscode/src/lsp/protocol/tsprotocol.go
+++ b/utils/vscode/src/lsp/protocol/tsprotocol.go
@@ -2844,7 +2844,7 @@
/*TargetSelectionRange defined:
* The range that should be selected and revealed when this link is being followed, e.g the name of a function.
- * Must be contained by the the `targetRange`. See also `DocumentSymbol#range`
+ * Must be contained by the `targetRange`. See also `DocumentSymbol#range`
*/
TargetSelectionRange Range `json:"targetSelectionRange"`
}
@@ -3627,14 +3627,14 @@
/*Range defined:
* The range enclosing this symbol not including leading/trailing whitespace but everything else
- * like comments. This information is typically used to determine if the the clients cursor is
+ * like comments. This information is typically used to determine if the clients cursor is
* inside the symbol to reveal in the symbol in the UI.
*/
Range Range `json:"range"`
/*SelectionRange defined:
* The range that should be selected and revealed when this symbol is being picked, e.g the name of a function.
- * Must be contained by the the `range`.
+ * Must be contained by the `range`.
*/
SelectionRange Range `json:"selectionRange"`
