Name

    ARB_copy_buffer

Name Strings

    GL_ARB_copy_buffer

Contact

    Jeff Bolz, NVIDIA Corporation (jbolz 'at' nvidia.com)

Contributors

    Rob Barris, Blizzard Entertainment
    Bruce Merry, ARM
    Eric Werness, NVIDIA
    Greg Roth, NVIDIA

Notice

    Copyright (c) 2009-2013 The Khronos Group Inc. Copyright terms at
        http://www.khronos.org/registry/speccopyright.html

Specification Update Policy

    Khronos-approved extension specifications are updated in response to
    issues and bugs prioritized by the Khronos OpenGL Working Group. For
    extensions which have been promoted to a core Specification, fixes will
    first appear in the latest version of that core Specification, and will
    eventually be backported to the extension document. This policy is
    described in more detail at
        https://www.khronos.org/registry/OpenGL/docs/update_policy.php

Status

    Complete. Approved by the ARB on March 19, 2009.

Version

    Last Modified Date: September 6, 2017
    Author Revision: 7

Number

    ARB Extension #59

Dependencies

    Written based on the wording of the OpenGL 3.0 (August 11, 2008 draft)
    specification.

Overview

    This extension provides a mechanism to do an accelerated copy from one
    buffer object to another. This may be useful to load buffer objects
    in a "loading thread" while minimizing cost and synchronization effort
    in the "rendering thread."

IP Status

    No known IP claims.

New Tokens

    Accepted by the target parameters of BindBuffer, BufferData,
    BufferSubData, MapBuffer, UnmapBuffer, GetBufferSubData,
    GetBufferPointerv, MapBufferRange, FlushMappedBufferRange,
    GetBufferParameteriv, BindBufferRange, BindBufferBase,
    and CopyBufferSubData:

    COPY_READ_BUFFER                    0x8F36
    COPY_WRITE_BUFFER                   0x8F37

New Procedures and Functions

    void CopyBufferSubData(enum readtarget, enum writetarget,
                           intptr readoffset, intptr writeoffset,
                           sizeiptr size);

Additions to Chapter 2 of the OpenGL 3.0 Specification (Rasterization)

    Add a new subsection "Copying Between Buffers" to section 2.9:

    All or part of one buffer object's data store may be copied to the
    data store of another buffer object by calling

    void CopyBufferSubData(enum readtarget, enum writetarget,
                           intptr readoffset, intptr writeoffset,
                           sizeiptr size);

    with readtarget and writetarget each set to one of the targets
    ARRAY_BUFFER, COPY_READ_BUFFER, COPY_WRITE_BUFFER,
    ELEMENT_ARRAY_BUFFER, PIXEL_PACK_BUFFER, PIXEL_UNPACK_BUFFER,
    TEXTURE_BUFFER, TRANSFORM_FEEDBACK_BUFFER, or UNIFORM_BUFFER. While
    any of these targets may be used, the COPY_READ_BUFFER and
    COPY_WRITE_BUFFER targets are provided specifically for copies, so
    that they can be done without affecting other buffer binding targets
    that may be in use. writeoffset and size specify the range of data
    in the buffer object bound to writetarget that is to be replaced, in
    terms of basic machine units. readoffset and size specify the range
    of data in the buffer object bound to readtarget that is to be
    copied to the corresponding region of writetarget.

    An INVALID_VALUE error is generated if any of readoffset,
    writeoffset, or size are negative, if readoffset+size exceeds the
    size of the buffer object bound to readtarget, or if
    writeoffset+size exceeds the size of the buffer object bound to
    writetarget.

    An INVALID_VALUE error is generated if the same buffer object is
    bound to both readtarget and writetarget, and the ranges
    [readoffset, readoffset+size) and [writeoffset, writeoffset+size)
    overlap.

    An INVALID_OPERATION error is generated if zero is bound to
    readtarget or writetarget.

    An INVALID_OPERATION error is generated if the buffer objects bound
    to either readtarget or writetarget are mapped.

Additions to Chapter 5 of the OpenGL 3.0 Specification (Special Functions)

    Add to the list (page 310) of "Vertex Buffer Objects" commands "not
    compiled into the display list but are executed immediately":

        CopyBufferSubData

Additions to the AGL/EGL/GLX/WGL Specifications

    None

GLX Protocol

    The following single command is sent to the server as
    a glxsingle request:

    CopyBufferSubData

        1       CARD8           opcode
        1       221             GLX opcode
        2       10              request length
        4       GLX_CONTEXT_TAG context tag
        8       CARD64          readoffset
        8       CARD64          writeoffset
        8       CARD64          size
        4       ENUM            readtarget
        4       ENUM            writetarget

Errors

    The error INVALID_VALUE is generated by CopyBufferSubData if
    readoffset, writeoffset, or size are less than zero, or if
    readoffset+size is greater than the value of BUFFER_SIZE of
    readtarget/readBuffer, or if writeoffset+size is greater than the
    value of BUFFER_SIZE of writetarget/writeBuffer.

    The error INVALID_OPERATION is generated by CopyBufferSubData if
    either readtarget/readBuffer or writetarget/writeBuffer are mapped.

    The error INVALID_VALUE is generated by CopyBufferSubData if
    readtarget/readBuffer and writetarget/writeBuffer are the same
    buffer object, and the ranges [readoffset, readoffset+size) and
    [writeoffset, writeoffset+size) overlap.

New State

    (add to table 6.52, Miscellaneous State, p. 390)

                                            Initial
    Get Value           Type    Get Command Value   Description                 Sec.    Attribute
    ----------------    ----    ----------- ------- --------------------------- ------  ---------
    COPY_READ_BUFFER    Z+      GetIntegerv 0       Buffer object bound to the  2.9     none
                                                    copy buffer "read" binding
                                                    point
    COPY_WRITE_BUFFE    Z+      GetIntegerv 0       Buffer object bound to the  2.9     none
                                                    copy buffer "write"
                                                    binding point

Usage Examples

    Replace BufferSubData with a non-cache-polluting update:

        BindBuffer(COPY_READ_BUFFER, tempBuffer);
        BufferData(COPY_READ_BUFFER, updateSize, NULL, STREAM_DRAW);
        // this may return a WriteCombined mapping!
        ptr = MapBuffer(COPY_READ_BUFFER, WRITE_ONLY);
        // fill ptr
        UnmapBuffer(COPY_READ_BUFFER);

        BindBuffer(COPY_WRITE_BUFFER, vtxBuffer);
        // this copy ideally requires no CPU work on the data itself.
        CopyBufferSubData(COPY_READ_BUFFER, COPY_WRITE_BUFFER,
                          0, writeoffset, updateSize);

Issues

    1) What should the new targets and parameters be named? READ/WRITE?
       SOURCE/DEST? Something else?

    RESOLVED: READ and WRITE, because it's consistent with the <access>
    parameters and state.

    2) How is this extension useful?

    This can be a desirable replacement to BufferSubData if there are
    large updates that will pollute the CPU cache. If generating the data
    can be offloaded to another thread, then the CPU cost of the update
    in the rendering thread can be very small.

    This can also be an alternate mechanism to MapBufferRange with the
    MAP_UNSYNCHRONIZED_BIT, by allowing the CPU to write into a temp
    buffer and then scheduling the update to be in-band with the
    rendering. MAP_UNSYNCHRONIZED_BIT can lead to hard-to-detect
    synchronization bugs if the GPU hasn't finished consuming the data
    that is overwritten (Write After Read hazard). Also, mapping a buffer
    may, on some implementations, require forcing the data store into a
    memory space more local to the CPU than to the GPU, which can adversely
    affect rendering performance.

    Finally, if an implementation supports concurrent data transfers in
    one context/thread while doing rendering in another context/thread,
    this extension may be used to move data from system memory to video
    memory in preparation for copying it into another buffer, or texture,
    etc., in the rendering thread.

    (3) Why don't the new tokens and entry points in this extension have
       "ARB" suffixes like other ARB extensions?

        RESOLVED: Unlike most ARB extensions, this is a strict subset of
        functionality already approved in OpenGL 3.1. This extension
        exists only to support that functionality on older hardware that
        cannot implement a full OpenGL 3.1 driver. Since there are no
        possible behavior changes between the ARB extension and core
        features, source code compatibility is improved by not using
        suffixes on the extension.

Revision History

    Revision 1, 2008/09/09
     - Initial draft
    Revision 2, 2008/09/26
     - Make EXT_direct_state_access interaction explicit.
    Revision 3, 2008/10/10
     - Fix missing entry points for the new targets.
    Revision 4, 2009/03/13
     - Move Named* entry point to EXT_direct_state_access.
    Revision 5, 2009/03/19
     - ARBify and remove ARB suffix from entry points and tokens.
    Revision 6, 2009/06/03
     - Add buffer target list and fix capitalization differences on
       parameter names per feedback from Jonathan Knispel
    Revision 7, 2017/09/06
     - Add GLX protocol.