Name

    ARB_transform_feedback2

Name Strings

    GL_ARB_transform_feedback2

Contributors

    Eric Zolnowski

Contact

    Pat Brown, NVIDIA Corporation (pbrown 'at' nvidia.com)
    Eric Zolnowski, AMD (eric.zolnowski 'at' amd.com)

Notice

    Copyright (c) 2010-2013 The Khronos Group Inc. Copyright terms at
        http://www.khronos.org/registry/speccopyright.html

Status

    Complete. Approved by the ARB at the 2010/01/22 F2F meeting.
    Approved by the Khronos Board of Promoters on March 10, 2010.

Version

    Last Modified Date:         2012/06/28
    Author Revision:            7

Number

    ARB Extension #93

Dependencies

    The OpenGL Shading Language (GLSL) is required.  OpenGL 2.0 or the 
    ARB_shader_objects extension is required.

    NV_transform_feedback or EXT_transform_feedback is required.  

    EXT_geometry_shader4 trivially interacts with this extension.

    This extension is written against the OpenGL 2.1 Specification.

    This extension is written against the EXT_transform_feedback extension 
    specification.

Overview

    The EXT_transform_feedback extension allows applications to capture 
    primitives to one or more buffer objects when transformed by the GL.
    This extension provides a few additional capabilities to these extensions,
    making transform feedback mode more useful.

    First, it provides transform feedback objects which encapsulate transform
    feedback-related state, allowing applications to replace the entire
    transform feedback configuration in a single bind call.  Second, it
    provides the ability to pause and resume transform feedback operations.
    When transform feedback is paused, applications may render without
    transform feedback or may use transform feedback with different state and
    a different transform feedback object.  When transform feedback is
    resumed, additional primitives are captured and appended to previously
    captured primitives for the object.

    Additionally, this extension provides the ability to draw primitives
    captured in transform feedback mode without querying the captured
    primitive count.  The command DrawTransformFeedback() is equivalent to
    glDrawArrays(<mode>, 0, <count>), where <count> is the number of vertices
    captured to buffer objects during the last transform feedback capture
    operation on the transform feedback object used.  This draw operation only
    provides a vertex count -- it does not automatically set up vertex array
    state or vertex buffer object bindings, which must be done separately by
    the application.

IP Status

    No known IP claims.

New Procedures and Functions

    void BindTransformFeedback(enum target, uint id);
    void DeleteTransformFeedbacks(sizei n, const uint *ids);
    void GenTransformFeedbacks(sizei n, uint *ids);
    boolean IsTransformFeedback(uint id);

    void PauseTransformFeedback(void);
    void ResumeTransformFeedback(void);

    void DrawTransformFeedback(enum mode, uint id);

New Tokens

    Accepted by the <target> parameter of BindTransformFeedback:

      TRANSFORM_FEEDBACK                                 0x8E22

    Accepted by the <pname> parameter of GetBooleanv, GetDoublev, GetIntegerv,
    and GetFloatv:

      TRANSFORM_FEEDBACK_BUFFER_PAUSED                   0x8E23
      TRANSFORM_FEEDBACK_BUFFER_ACTIVE                   0x8E24
      TRANSFORM_FEEDBACK_BINDING                         0x8E25

Additions to Chapter 2 of the OpenGL 2.1 Specification (OpenGL Operation)

    (Replace the "Section 2.Y" introduced by the EXT_transform_feedback 
    specification.)

    In transform feedback mode, attributes of the vertices of transformed
    primitives are written out to one or more buffer objects. The vertices are
    fed back after vertex color clamping but before clipping.  If a geometry
    shader is active, the vertices recorded are those emitted from the geometry 
    shader.  The transformed vertices may be optionally discarded after being 
    stored into one or more buffer objects, or they can be passed on down to 
    the clipping stage for further processing.  


    Section 2.Y.1, Transform Feedback Objects

    The set of buffer objects used to capture vertex attributes and related
    state are stored in a transform feedback object.  If a vertex or geometry
    shader is active, the set of attributes captured in transform feedback
    mode is determined using the state of the active program object;
    otherwise, it is taken from the state of the currently bound transform
    feedback object, as described below.  The name space for transform
    feedback objects is the unsigned integers.  The name zero designates the
    default transform feedback object.

    The command

        void GenTransformFeedbacks(sizei n, uint *ids)

    returns <n> previously unused transform feedback object names in <ids>.
    These names are marked as used, for the purposes of
    GenTransformFeedbacks only, but they acquire transform feedback state
    only when they are first bound.

    Transform feedback objects are deleted by calling

        void DeleteTransformFeedbacks(sizei n, const uint *ids)

    <ids> contains <n> names of transform feedback objects to be deleted.
    After a transform feedback object is deleted it has no contents, and its
    name is again unused.  Unused names in <ids> are silently ignored, as is
    the value zero. The default transform feedback object cannot be
    deleted. If an active transform feedback object is deleted its name
    immediately becomes unused, but the underlying object is not deleted
    until it is no longer active
       [This should be cited with a reference to appendix D.3 of the
        OpenGL 3.3 Specification, but this extension is instead written
        against OpenGL 2.1]

    The error INVALID_OPERATION is generated by DeleteTransformFeedbacks 
    if the transform feedback operation for any object named by <ids> is
    currently active.

    A transform feedback object is created by binding a name
    returned by GenTransformFeedbacks with the command

        void BindTransformFeedback(enum target, uint id)

    <target> must be TRANSFORM_FEEDBACK and <id> is the transform 
    feedback object name.  The resulting transform feedback object is a new 
    state vector, initialized to the default state values described in Table
    6.X.  Additionally, the new object is bound to the GL state vector and 
    is used for subsequent transform feedback operations.

    BindTransformFeedback can also be used to bind an existing transform
    feedback object to the GL state for subsequent use.  If the bind is
    successful, no change is made to the state of the newly bound transform
    feedback object and any previous binding to <target> is broken.

    While a transform feedback buffer object is bound, GL operations on the
    target to which it is bound affect the bound transform feedback object,
    and queries of the target to which a transform feedback object is bound
    return state from the bound object.  When buffer objects are bound for
    transform feedback, they are attached to the currently bound transform
    feedback object.  Buffer objects are used for transform feedback only if
    they are attached to the currently bound transform feedback object.

    In the initial state, a default transform feedback object is bound and
    treated as a transform feedback object with a name of zero.  That object
    is bound any time BindTransformFeedback() is called with <id> of zero.

    The error INVALID_OPERATION is generated by BindTransformFeedback if the 
    transform feedback operation is active on the currently bound transform 
    feedback object, and that operation is not paused (as described below).

    BindTransformFeedback fails and an INVALID_OPERATION error is
    generated if <id> is not zero or a name returned from a previous
    call to GenTransformFeedbacks, or if such a name has since been
    deleted with DeleteTransformFeedbacks.


    Section 2.Y.2, Transform Feedback Primitive Capture

    Transform feedback for the currently bound transform feedback object is
    started and finished by calling

      void BeginTransformFeedback(enum primitiveMode)

    and

      void EndTransformFeedback(void),

    respectively. Transform feedback is said to be active after a call to
    BeginTransformFeedback and inactive after a call to EndTransformFeedback.
    <primitiveMode> is one of TRIANGLES, LINES, or POINTS, and specifies the 
    output type of primitives that will be recorded into the buffer objects 
    bound for transform feedback (see below).

    Transform feedback commands must be paired; the error INVALID_OPERATION is
    generated by BeginTransformFeedback if transform feedback is active, and 
    by EndTransformFeedback if transform feedback is inactive. Transform 
    feedback is initially inactive.

    Transform feedback operations for the currently bound transform feedback
    object may be paused and resumed by calling

        void PauseTransformFeedback(void)

    and

        void ResumeTransformFeedback(void),

    respectively.  When transform feedback operations are paused, transform
    feedback is still considered active and changing most transform feedback
    state related to the object results in an error.  However, a new transform
    feedback object may be bound while transform feedback is paused.  The
    error INVALID_OPERATION is generated by PauseTransformFeedback if the
    currently bound transform feedback is not active or is paused.  The error
    INVALID_OPERATION is generated by ResumeTransformFeedback if the
    currently bound transform feedback is not active or is not paused.

    When transform feedback is active and not paused, all geometric primitives
    generated must be compatible with the value of <primitiveMode> passed to
    BeginTransformFeedback.  The error INVALID_OPERATION is generated by Begin 
    or any operation that implicitly calls Begin (such as DrawElements) if 
    <mode> is not one of the allowed modes in Table X.1.  If a geometry shader 
    is active, its output primitive type is used instead of  the <mode> 
    parameter passed to Begin for the purposes of this error check. Any 
    primitive type may be used while transform feedback is paused.

        Transform Feedback
        primitiveMode               allowed render primitive modes
        ----------------------      ---------------------------------
        POINTS                      POINTS
        LINES                       LINES, LINE_LOOP, and LINE_STRIP
        TRIANGLES                   TRIANGLES, TRIANGLE_STRIP,
                                    TRIANGLE_FAN, QUADS, QUAD_STRIP,
                                    and POLYGON

        Table X.1 Legal combinations between the transform feedback primitive
        mode, as passed to BeginTransformFeedback and the current primitive
        mode.

    Transform feedback mode captures the values of varying variables written by an
    active vertex or geometry shader.  The error INVALID_OPERATION is
    generated by BeginTransformFeedback if no vertex or geometry shader is
    active.

    Buffer objects are made to be targets of transform feedback by calling one
    of the commands

      void BindBufferRange(enum target, uint index, uint buffer,
                           intptr offset, sizeiptr size),
      void BindBufferBase(enum target, uint index, uint buffer),

    with <target> set to TRANSFORM_FEEDBACK_BUFFER. There is an array of
    buffer object binding points that are used while transform feedback is
    active, plus a single general binding point that can be used by other
    buffer object manipulation functions (e.g., BindBuffer, MapBuffer). All
    three commands bind the buffer object named by <buffer> to the general
    binding point, and additionally bind the buffer object to the binding
    point in the array given by <index>. An INVALID_VALUE error is
    generated if <index> is greater than or equal to the value of
    MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS.

    For BindBufferRange, <offset> specifies a starting offset into the
    buffer object <buffer> and <size> specifies the amount of data that can
    be written to the buffer object while transform feedback mode is active.
    Both <offset> and <size> are in basic machine units. An INVALID_VALUE
    error is generated if <size> is less than or equal to zero, or if either
    <offset> or <size> are not word-aligned.

    BindBufferBase binds the entire buffer, even when the size of the buffer
    is changed after the binding is established. It is equivalent to calling
    BindBufferRange with <offset> zero, while <size> is determined by the
    size of the bound buffer at the time the binding is used.

    Regardless of the size specified with BindBufferRange, or indirectly
    with BindBufferBase, the GL will never read or write beyond the end of a
    bound buffer. This may result in visibly different behavior when a
    buffer overflow would otherwise result, as described below.

    The set of buffer objects used by a transform feedback object may not
    change while transform feedback is active. The error INVALID_OPERATION
    is generated by BindBufferRange, BindBufferOffsetEXT, or BindBufferBase
    if <target> is TRANSFORM_FEEDBACK_BUFFER and transform feedback is
    currently active.

    When an individual point, line, or triangle primitive reaches the
    transform feedback stage while transform feedback is active and not
    paused, the values of the specified varying variables of each vertex are 
    appended to the buffer objects bound to the transform feedback binding 
    points.  The attributes of the first vertex received after 
    BeginTransformFeedback are written at the starting offsets of the bound
    buffer objects set by BindBufferRange, and subsequent vertex attributes
    are appended to the buffer object.  When capturing line and triangle 
    primitives, all attributes of the first vertex are written first, followed
    by attributes of the subsequent vertices.  When writing varying variables 
    that are arrays, individual array elements are written in order.  For
    multi-component varying variables, elements of varying arrays, or
    transformed vertex attributes, the individual components are written in
    order.  The value for any attribute specified to be streamed to a buffer
    object but not actually written by a vertex or geometry shader is
    undefined.  

    When transform feedback is paused, no vertices are recorded.  When
    transform feedback is resumed, subsequent vertices are appended to the
    buffer objects bound immediately following the last vertex written while
    transform feedback was paused.

    When quads and polygons are provided to transform feedback with a
    primitive mode of TRIANGLES, they will be tessellated and recorded as
    triangles (the order of tessellation within a primitive is undefined).
    Individual lines or triangles of a strip or fan primitive will be
    extracted and recorded separately.  Incomplete primitives are not
    recorded.

    Transform feedback can operate in either INTERLEAVED_ATTRIBS or
    SEPARATE_ATTRIBS mode.  In INTERLEAVED_ATTRIBS mode, the values of one or 
    more varyings or transformed vertex attributes are written interleaved, 
    into the buffer object bound to the first transform feedback binding point
    (index = 0).  If more than one varying variable is written, they will be 
    recorded in the order specified by TransformFeedbackVaryings 
    (EXT_transform_feedback specification, section 2.15.3).  In 
    SEPARATE_ATTRIBS mode, the first varying variable or transformed vertex 
    attribute specified is written to the first transform feedback binding 
    point; subsequent varying variables are written to the subsequent 
    transform feedback binding points.  The total number of variables or 
    transformed attributes that may be captured in SEPARATE_ATTRIBS mode is 
    given by MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS.

    If recording the vertices of a primitive to the buffer objects being used
    for transform feedback purposes would result in either exceeding the
    limits of any buffer object's size, or in exceeding the end position
    <offset> + <size> - 1, as set by BindBufferRange, then no vertices of
    that primitive are recorded in any buffer object, and the counter
    corresponding to the asynchronous query target
    TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN (see Section 2.Z) is not
    incremented.

    In either separate or interleaved modes, all transform feedback binding
    points that will be written to must have buffer objects bound when
    BeginTransformFeedback is called.  The error INVALID_OPERATION is
    generated by BeginTransformFeedback if any binding point used in
    transform feedback mode does not have a buffer object bound.  In
    interleaved mode, only the first buffer object binding point is ever
    written to.

    (add error paragraph describing conditions where it is illegal to change
    transform feedback-related state)

    When BeginTransformFeedback is called with an active program object
    containing a vertex or geometry shader, the set of varying variables
    captured during transform feedback is taken from the active program object
    and may not be changed while transform feedback is active.  That program
    object must be active until the EndTransformFeedback is called, except
    while the transform feedback object is paused.  The error 
    INVALID_OPERATION is generated:

     * by TransformFeedbackVaryings if the current transform feedback 
       object is active, even if paused;

     * by UseProgram if the current transform feedback object is active and
       not paused;

     * by LinkProgram if <program> is the name of a program being used by one
       or more transform feedback objects, even if the objects are not
       currently bound or are paused; or

     * by ResumeTransformFeedback if the program object being used by the
       current transform feedback object is not active.


    Section 2.Y.3, Transform Feedback Draw Operations

    When transform feedback is active, the values of varyings or transformed
    vertex attributes are captured into the buffer objects attached to the
    current transform feedback object.  After transform feedback is complete,
    subsequent rendering operations may use the contents of these buffer
    objects (section 2.9).  The number of vertices captured during transform
    feedback is stored in the corresponding transform feedback object and may
    be used in conjunction with the command

        void DrawTransformFeedback(enum mode, uint id)

    to replay the captured vertices.  This command is equivalent to calling
    DrawArrays with <mode> set to <mode>, <first> set to zero, and <count> set
    to the number of vertices captured the last time transform feedback was
    active on the transform feedback object named by <id>.  The error
    INVALID_VALUE is generated if <id> is not the name of a transform feedback
    object.  The error INVALID_OPERATION is generated if
    EndTransformFeedback has never been called while the object named by <id> 
    was bound.  No error is generated if the transform feedback object named 
    by <id> is active; the vertex count used for the rendering operation is 
    set by the previous EndTransformFeedback command.


Additions to Chapter 3 of the OpenGL 2.1 Specification (Rasterization)

    None.

Additions to Chapter 4 of the OpenGL 2.1 Specification (Per-Fragment
Operations and the Frame Buffer)

    None.

Additions to Chapter 5 of the OpenGL 2.1 Specification (Special Functions)

    On p. 244, add a new set of commands to the list of commands not compiled
    into a display list:

      Transform feedback objects:  GenTransformFeedbacks,
      DeleteTransformFeedbacks, 

    (note:  IsTransformFeedback is covered by the "Other queries" rule.)

Additions to Chapter 6 of the OpenGL 2.1 Specification (State and
State Requests)

    (Add to the "Transform Feedback" query section added by the
    EXT_transform_feedback extension.)

    The command

        boolean IsTransformFeedback(uint id)

    returns TRUE if <id> is the name of a transform feedback object. If <id>
    is a non-zero value that is not the name of a transform feedback object,
    IsTransformFeedback() return FALSE.

Additions to Appendix A of the OpenGL 2.1 Specification (Invariance)

    None.

Additions to the AGL/GLX/WGL Specifications

    None.

GLX Protocol

    TBD (Protocol support needs to be added for the new functions.)

Dependencies on NV_transform_feedback2

Dependencies on EXT_transform_feedback

    This language is written against the EXT_transform_feedback 
    specification.

Dependencies on EXT_geometry_shader4

    If EXT_geometry_shader4 is not supported, remove all references to
    geometry shaders.

Errors

    The error INVALID_OPERATION is generated by BindTransformFeedback if a 
    transform feedback operation is active on the currently bound transform
    feedback object, and that operation is not paused (as described below).

    The error INVALID_OPERATION is generated by DeleteTransformFeedbacks if 
    the transform feedback operation for any object named by <ids> is
    currently active.

    The error INVALID_OPERATION is generated by BeginTransformFeedback if
    transform feedback is active.

    The error INVALID_OPERATION is generated by EndTransformFeedback if
    transform feedback is inactive.

    The error INVALID_OPERATION is generated by PauseTransformFeedback if
    the currently bound transform feedback is not active or is paused.

    The error INVALID_OPERATION is generated by ResumeTransformFeedback 
    if the currently bound transform feedback is not active or is not paused.

    The error INVALID_OPERATION is generated by Begin or any operation that
    implicitly calls Begin (such as DrawElements) if transform feedback is
    active and not paused and if <mode> is incompatible with the
    <primitiveMode> parameter supplied to BeginTransformFeedback.

    The error INVALID_VALUE is generated by BindBufferRange,
    BindBufferOffsetEXT, or BindBufferBase if <target> is
    TRANSFORM_FEEDBACK_BUFFER and <index> is greater than or equal to the
    value of MAX_TRANSFORM_FEEDBACK_SEPARATE_ATTRIBS.

    The error INVALID_VALUE is generated by BindBufferRange if <size> is
    less than or equal to zero or either <offset> or <size> are not
    word-aligned.

    The error INVALID_VALUE is generated by BindBufferOffsetEXT if <offset>
    is not word-aligned.

    The error INVALID_OPERATION is generated by BindBufferRange,
    BindBufferOffsetEXT, or BindBufferBase if <target> is
    TRANSFORM_FEEDBACK_BUFFER and transform feedback is currently active.

    The error INVALID_OPERATION is generated by BeginTransformFeedback if
    any binding point used in transform feedback mode does not have a buffer
    object bound.

    The error INVALID_OPERATION is generated by TransformFeedbackVaryings 
    if the current transform feedback object is active, even if paused.

    The error INVALID_OPERATION is generated by UseProgram if the current
    transform feedback object is active and not paused.

    The error INVALID_OPERATION is generated by LinkProgram if <program> is
    the name of a program being used by one or more transform feedback
    objects, even if the objects are not currently bound or are paused.

    The error INVALID_OPERATION is generated by ResumeTransformFeedback if
    the program object being used by the current transform feedback object is
    not active.

    The error INVALID_VALUE is generated by DrawTransformFeedback if <id>
    is not the name of a transform feedback object.

    The error INVALID_OPERATION is generated by DrawTransformFeedback if
    EndTransformFeedback has never been called while the object named by
    <id> was bound.


New State

   (Add a new table:  Table 6.X, Transform Feedback Object State)

    Get Value             Type    Get Command     Init. Value  Description                Sec    Attrib
    ------------------    ------  --------------  ------------ -------------------------  -----  ------
    TRANSFORM_FEEDBACK_   Z+      GetIntegerv          0        Buffer object bound to    6.1.13   -
      BUFFER_BINDING                                            generic bind point for
                                                                transform feedback.
    TRANSFORM_FEEDBACK_   nxZ+    GetIntegeri_v        0        Buffer object bound to    6.1.13   -
      BUFFER_BINDING                                            each transform feedback
                                                                attribute stream.
    TRANSFORM_FEEDBACK_   nxZ+    GetIntegeri_v        0        Start offset of binding   6.1.13   -
      BUFFER_START                                              range for each transform
                                                                feedback attrib. stream
    TRANSFORM_FEEDBACK_   nxZ+    GetIntegeri_v        0        Size of binding range     6.1.13   -
      BUFFER_SIZE                                               for each transform
    TRANSFORM_FEEDBACK_   B       GetBooleanv        FALSE      Is transform feedback     6.1.13   -
      BUFFER_PAUSED                                             paused on this object?
    TRANSFORM_FEEDBACK_   B       GetBooleanv        FALSE      Is transform feedback     6.1.13   -
      BUFFER_ACTIVE                                             active on this object?

    [[ Note: This table includes all transform feedback state provided by
       EXT_transform_feedback, except for transform feedback-related state
       belonging to query objects and GLSL program objects.  The only other
       transform feedback-related state not present in these objects is the
       object binding (below) and implementation-dependent limits. ]]

    (Modify table 6.10:  Transformation State, p. 275)

    Get Value             Type    Get Command     Init. Value  Description                Sec    Attrib
    ------------------    ------  --------------  ------------ -------------------------  -----  ------
    TRANSFORM_FEEDBACK_   Z+      GetIntegerv          0       Object bound for transform 2.Y      -
      BINDING                                                  feedback operations

New Implementation Dependent State

    None.

Issues

    1.  How should we provide the ability to automatically render primitives
        captured in transform feedback mode?

        RESOLVED:  Adding a new transform feedback state object provides
        encapsulation for two useful operations:  pause/resume and automatic
        rendering.  

        When applications pause and possibly switch to different transform
        feedback state, it is necessary to save the state of the paused
        transform feedback operation somewhere.  The transform feedback object
        provides a convenient entity to hold this saved state.  The transform
        feedback object is also a convenient place to store final counts for
        use by actual drawing.

        Additionally, the transform feedback object is helpful in ensuring
        that the transform feedback state used when resuming transform
        feedback is the same as when it was paused without a complicated error
        check.  We simply disallow changing the state in an object while
        transform feedback is active (even when paused), so the state can't
        become inconsistent while paused.  The same basic consistency rules
        apply to transform feedback state stored separately in a GLSL program
        object; you can't change them while transform feedback is active in
        the original extensions, and this extension treats the paused state as
        active for the purposes of these restrictions.

        Alternately, the in-progress transform feedback state (e.g., vertex
        counts, pointers into buffer objects) could have been stored with the
        buffer objects used to capture the primitives.

    2.  Are transform feedback objects shared between contexts?

        RESOLVED:  No.  The amount of state present in one of these objects is
        fairly small -- there is not a lot of memory saved by avoiding
        multiple copies through sharing.  Additionally, sharing transform
        feedback objects between contexts doesn't seem particularly useful --
        an object could only really be used by one context at a time and
        explicit synchronization would be required to use the results of one
        object.

        Note that this resolution is consistent with query objects, which is
        the primary type of object used in the original transform feedback
        specification.

    3.  How do the new transform feedback objects interact with GLSL program
        objects?

        RESOLVED:  The set of varyings captured during transform feedback and
        the buffer mode (interleaved or separate) were assigned to the program
        object in the original EXT_transform_feedback specification.  That
        seems sensible given that the varyings themselves belong to the
        program object.  

        In the original extension, implementations are forbidden to unbind or
        relink a program object or reassign the set of varyings to capture
        while transform feedback is active.  The same basic restrictions apply
        in this extension, except that than an application may unbind a
        program object while transform feedback is paused.  In order to resume
        transform feedback, the same program object must be active.
        Applications may not relink a program or reassign its captured
        varyings while it is being actively used for capture in any transform
        feedback object.

        The actual buffer objects bound in transform feedback mode were bound
        to the context (not the program object) in the original transform
        feedback extension.

    4.  Should we provide any behavior to "cancel" paused transform feedback
        operations?  If an application fails to assign the correct state
        (e.g., GLSL program object), a resume operation may fail and the XFB
        object might get stuck in a paused state indefinitely.

        RESOLVED:  Yes.  EndTransformFeedback is defined to cancel an active
        transform feedback operation, even if it is currently paused.

    5.  Should buffer object bindings be encapsulated in the new transform
        feedback object?

        RESOLVED:  Yes.  This allows applications the convenience of updating
        all the transform feedback state in one call.  Additionally, it
        ensures that the set of buffer bindings remains consistent while
        transform feedback is active -- even if we switch objects while
        paused.

    6.  Should we be able to use two different sets of transform feedback
        state (one for capture, a second for rendering - via
        DrawTransformFeedback)?

        RESOLVED:  Yes.  We should support the ability to capture primitives
        in transform feedback that are produced by DrawTransformFeedback.
        Requiring that applications use the a single transform feedback object
        for both operations (if even possible) seems inconvenient.  As a
        result, we provide the ability to use separate objects for capture and
        rendering.

    7.  How should the second transform feedback object used for rendering be
        provided to the GL?

        RESOLVED:  The approach chosen by this extension is to have
        DrawTransformFeedback() accept a transform feedback object ID.  

        An alternate approach would have been to provide a second binding
        point (TRANSFORM_FEEDBACK_RENDER?) whose bound object would be used
        by any DrawTransformFeedback() call.


    8.  Can a single transform feedback object be used for both capture and
        drawing (via DrawTransformFeedback) at the same time?

        RESOLVED:  Yes.  

        DrawTransformFeedback is defined to use the vertex count established
        when the previous transform feedback operation on that object
        completes (by an EndTransformFeedback call).  If transform feedback
        is active for an object (paused or not), the accumulated vertex count
        for the in-progress operation is never used by
        DrawTransformFeedback.

    9.  Does DrawTransformFeedback() automatically use the buffer objects
        from the previous transform feedback operation?  If not, does it
        require that applications set up and use only those buffer manually?

        RESOLVED:  DrawTransformFeedback() couldn't automatically set up
        buffer objects, even if we wanted to (which we don't).  No mechanism
        exists to automatically line up per-vertex outputs captured during
        transform feedback against the inputs of a different vertex shader.

        Applications are thus required to manually set up their vertex arrays
        appropriately prior to calling DrawTransformFeedback().
        Applications are not required to use any of the buffer objects
        written to during the previous transform feedback operation, and are
        allowed to use other buffer objects (OK) or vertex arrays not stored
        in a buffer object at all (legal, but not recommended).  The only
        information the draw call uses from the previous transform feedback
        operation is the total number of vertices captured.

   10.  Does DrawTransformFeedback() require that an application use the
        same primitive type for drawing that was used during the previous
        transform feedback operation?

        RESOLVED:  No.  We do expect that will be the common case, however.

   11.  What happens on if DrawTransformFeedback() uses a transform feedback
        object whose last capture operation overflowed, and started dropping
        primitives.

        RESOLVED:  Any primitives discarded during a transform feedback
        operation will not affect the vertex count extracted by
        DrawTransformFeedback(), as though those primitives never existed.

   12.  How does the ability to pause/resume transform feedback interact with
        the TRANSFORM_FEEDBACK_PRIMITIVES_WRITTEN query object?

        RESOLVED:  There is no explicit interaction in this case.  

        The transform feedback-related query objects and transform feedback
        objects are completely independent.  If multiple transform feedback
        objects are used between BeginQuery() and EndQuery() calls, the query
        result reflects the number of primitives written using *any* transform
        feedback object.

        Note that the primitives written counter is never incremented when
        transform feedback is paused, because no primitives will be written to
        buffers while transform feedback is paused.

   13.  Should we provide a mechanism to query the number of vertices or
        primitives recorded in the last transform feedback operation on an
        object?  If so, how?

        RESOLVED:  No, not in the this spec.  The existing TRANSFORM_FEEDBACK_
        PRIMITIVES_WRITTEN queries can be used to obtain this information.

   14.  Can a buffer object be attached to more than one transform feedback
        object at the same time?

        RESOLVED:  Yes.  Applications using transform feedback should avoid
        cases where transform feedback operations can conflict, including:

          * using multiple threads that simultaneously write to overlapping
            regions of a single buffer object; or

          * using one or multiple threads, where a portion of a buffer object
            is written using one transform feedback object while another
            transform feedback operation writing to an overlapping region of
            the same buffer is paused.

   15.  When a transform feedback object is active and not paused, binding a
        different transform feedback object without pausing is specified to
        result in an INVALID_OPERATION error.  Should we instead define the
        bind to implicitly pause and resume as required?

        RESOLVED:  No.  While implicit pauses and resumes would be convenient,
        they have interaction issues with the current transform feedback API.

        In particular, transform feedback forbids applications from changing
        various pieces of relevant state (e.g., transform feedback buffer
        bindings, active GLSL program object) during an active transform
        feedback operation.  The active GLSL program object may be changed
        while transform feedback is paused, but it must be restored prior to
        resuming.

        Consider two active transform feedback objects (A and B) using two
        different program objects (C and D, respectively).  With the current
        API, you can switch back and forth as follows:

            // Perform first half of transform feedback for object A.
            UseProgram(C);
            BindTransformFeedback(TRANSFORM_FEEDBACK, A);
            BeginTransformFeedback(...);
            ...
            PauseTransformFeedback();

            // Perform first half of transform feedback for object B.
            UseProgram(D);
            BindTransformFeedback(TRANSFORM_FEEDBACK, B);
            BeginTransformFeedback(...);
            ...
            PauseTransformFeedback();

            // Perform second half of transform feedback for object A.
            UseProgram(C);
            BindTransformFeedback(TRANSFORM_FEEDBACK, A);
            ResumeTransformFeedback();
            ...
            EndTransformFeedback();

            // Perform second half of transform feedback for object B.
            UseProgram(D);
            BindTransformFeedback(TRANSFORM_FEEDBACK, B);
            ResumeTransformFeedback();
            ...
            EndTransformFeedback();

        Implicit pauses and resumes would allow applications to omit the
        PauseTransformFeedback() and ResumeTransformFeedback() calls.  The
        problem with this approach is that it's not clear when to change
        program objects.  In the example above, the second call to
        UseProgram(C) is legal because the bound transform feedback object (B)
        is paused.  If the pause call were removed in favor of implicit
        pauses, that UseProgram(C) call would be illegal because there is an
        active transform feedback object.  Assume the UseProgram(C) call were
        moved to be after the BindTransformFeedback(..., A) call on the next
        line instead.  In that case, the implicit resume on the bind call
        would be the problem instead -- we'd be resuming a transform feedback
        operation while the wrong program object (D) is active.


Revision History

      Rev.    Date    Author    Changes
      ----  --------  --------  -----------------------------------------
       7    06/28/12  Jon Leech Remove INVALID_VALUE error for              
                                BindBufferRange when specifying a range     
                                beyond the current end of buffer. Define    
                                BindBufferBase as specifying a range as     
                                large as the actual buffer size at time of  
                                use, and return zero when querying the      
                                buffer size as a sentinel value for the     
                                buffer size indicating this behavior.       
                                Specify that the GL will never read from or 
                                write to beyond the end of a bound buffer   
                                (Bugs 7318 and 7329, matching OpenGL 4.2
                                core spec behavior). Reflow paragraphs that
                                were too wide. Replace references to
                                nonexistent BindBufferOffset command with
                                BindBufferOffsetEXT from
                                EXT_transform_feedback.

       6    02/11/10  Jon Leech Specify delayed-deletion behavior for
                                active XFB objects (Bug 5768).

       5    01/19/10  Jon Leech Reorder object management section to match
                                other types of objects and require Gen'ned
                                names be used for binding objects (Bug 5846).

       4    12/07/09  jbolz     Rename EXT->ARB.

       3    10/12/09  ericz     Removed some state that was part of
                                NV_transform_feedback and only applied to
                                fixed function.

       2    09/10/09  ericz     Updated issues that were previously UNRESOLVED,
                                based on the latest NV_transform_feedback2
                                spec. Allow EndTransformFeedbackEXT to be
                                called while transform feedback is paused.

       1    06/13/09  ericz     Created an initial EXT_transform_feedback2
                                spec by forking off the existing 
                                NV_transform_feedback 2 spec.