skia / external / github.com / KhronosGroup / OpenGL-Registry / eae1d6dde1e283f6fdf803274a2484007e592599 / . / extensions / SGIS / SGIS_texture_filter4.txt

Name | |

SGIS_texture_filter4 | |

Name Strings | |

GL_SGIS_texture_filter4 | |

Version | |

$Date: 1997/03/24 18:56:21 $ $Revision: 1.9 $ | |

Number | |

7 | |

Dependencies | |

None | |

Overview | |

This extension allows 1D and 2D textures to be filtered using an | |

application-defined, four sample per dimension filter. (In addition to | |

the NEAREST and LINEAR filters defined in the original GL Specification.) | |

Such filtering results in higher image quality. It is defined only | |

for non-mipmapped filters. The filter that is specified must be | |

symmetric and separable (in the 2D case). | |

Issues | |

* What should the default filter function be? | |

- Implementation dependent. | |

* Should this extension define 2-wide texture borders? Do we really | |

want to aggrandize this border stuff :-( | |

- No. | |

* Should this extension define 2D filtering only (and not 1D)? | |

- No. | |

* A GLU function that accepts Mitchell parameters and a texture | |

target should be defined. | |

* This specification retains a separate filter function description | |

with every texture. In conjunction with EXT_texture_object, this | |

may result in a lot of filter functions. Implementations should | |

optimize for the default filter function to save storage cost. | |

Reasoning | |

* The name is changed from "cubic" to "filter4" because the table | |

allows the specification of filters that are not at all cubic in | |

nature. A true cubic filter extension would define the filter | |

function as a cubic polynomial. | |

New Procedures and Functions | |

void TexFilterFuncSGIS(enum target, | |

enum filter, | |

sizei n, | |

const float* weights); | |

void GetTexFilterFuncSGIS(enum target, | |

enum filter, | |

float* weights); | |

New Tokens | |

Accepted by the <param> parameter of TexParameteri and TexParameterf, | |

and by the <params> parameter of TexParameteriv and TexParameterfv, when | |

their <pname> parameter is TEXTURE_MIN_FILTER or TEXTURE_MAG_FILTER. | |

Also accepted by the <filter> parameters of TexFilterFuncSGIS and | |

GetTexFilterFuncSGIS: | |

FILTER4_SGIS | |

Accepted by the <pname> parameter of GetTexParameteriv and | |

GetTexParameterfv, when the <target> parameter is TEXTURE_1D or | |

TEXTURE_2D: | |

TEXTURE_FILTER4_SIZE_SGIS | |

Additions to Chapter 2 of the GL Specification (OpenGL Operation) | |

None | |

Additions to Chapter 3 of the GL Specification (Rasterization) | |

The additional token value FILTER4_SGIS is accepted as an enumerated | |

value for the texture minification and magnification filters, causing | |

Table 3.7 to be replaced with the table below: | |

Name Type Legal Values | |

---- ---- ------------ | |

TEXTURE_WRAP_S integer CLAMP, REPEAT | |

TEXTURE_WRAP_T integer CLAMP, REPEAT | |

TEXTURE_WRAP_R_EXT integer CLAMP, REPEAT | |

TEXTURE_MIN_FILTER integer NEAREST, LINEAR, | |

NEAREST_MIPMAP_NEAREST, | |

NEAREST_MIPMAP_LINEAR, | |

LINEAR_MIPMAP_NEAREST, | |

LINEAR_MIPMAP_LINEAR, | |

FILTER4_SGIS | |

TEXTURE_MAG_FILTER integer NEAREST, LINEAR, | |

FILTER4_SGIS | |

TEXTURE_BORDER_COLOR 4 floats any 4 values in [0,1] | |

Table 3.7: Texture parameters and their values. | |

Filter4 filtering is specified by calling TexParameteri, TexParameterf, | |

TexParameteriv, or TexParameterfv with <pname> set to one of | |

TEXTURE_MIN_FILTER or TEXTURE_MAG_FILTER, and <param> or <params> set to | |

FILTER4_SGIS. Because filter4 filtering is defined only for | |

non-mipmapped textures, there is no difference between its definition | |

for minification and magnification. First consider the 1-dimensional | |

case. Let T be a computed texture value (one of R_t, G_t, B_t, or A_t). | |

Let T[i] be the component value of the texel at location i in a | |

1-dimensional texture image. Then, if the appropriate texture filter | |

mode is FILTER4_SGIS, a 4-texel group is selected: | |

/ floor(u - 1/2) mod 2**n, TEXTURE_WRAP_S is REPEAT | |

i1 = ( | |

\ floor(u - 1/2), TEXTURE_WRAP_S is CLAMP | |

/ (i1 + 1) mod 2**n, TEXTURE_WRAP_S is REPEAT | |

i2 = ( | |

\ i1 + 1, TEXTURE_WRAP_S is CLAMP | |

/ (i1 + 2) mod 2**n, TEXTURE_WRAP_S is REPEAT | |

i3 = ( | |

\ i1 + 2, TEXTURE_WRAP_S is CLAMP | |

/ (i1 - 1) mod 2**n, TEXTURE_WRAP_S is REPEAT | |

i0 = ( | |

\ i1 - 1, TEXTURE_WRAP_S is CLAMP | |

Let f(x) be the filter weight function of positive distance x. Let | |

A = frac(u - 1/2) | |

where frac(x) denotes the fractional part of x, and u is the texture | |

image coordinate in the s direction, as illustrated in Figure 3.10 of | |

the GL Specification. Then the texture value T is found as | |

T = f(1+A) * T[i0] + | |

f(A) * T[i1] + | |

f(1-A) * T[i2] + | |

f(2-A) * T[i3] | |

If any of the selected T[i] in the above equation refer to a border | |

texel with unspecified value, then the border color given by the current | |

setting of TEXTURE_BORDER_COLOR is used instead of the unspecified value. | |

For 2-dimensional textures the calculations for i0, i1, i2, i3, and A | |

are identical to the 1-dimensional case. A 16-texel group is selected, | |

requiring four j values computed as | |

/ floor(v - 1/2) mod 2**m, TEXTURE_WRAP_T is REPEAT | |

j1 = ( | |

\ floor(v - 1/2), TEXTURE_WRAP_T is CLAMP | |

/ (j1 + 1) mod 2**m, TEXTURE_WRAP_T is REPEAT | |

j2 = ( | |

\ j1 + 1, TEXTURE_WRAP_T is CLAMP | |

/ (j1 + 2) mod 2**m, TEXTURE_WRAP_T is REPEAT | |

j3 = ( | |

\ j1 + 2, TEXTURE_WRAP_T is CLAMP | |

/ (j1 - 1) mod 2**m, TEXTURE_WRAP_T is REPEAT | |

j0 = ( | |

\ j1 - 1, TEXTURE_WRAP_T is CLAMP | |

Let | |

B = frac(v - 1/2) | |

where v is the texture image coordinate in the t direction, as | |

illustrated in Figure 3.10 of the GL Specification. Then the texture | |

value T is found as | |

T = f(1+A) * f(1+B) * T[i0,j0] + | |

f(A) * f(1+B) * T[i1,j0] + | |

f(1-A) * f(1+B) * T[i2,j0] + | |

f(2-A) * f(1+B) * T[i3,j0] + | |

f(1+A) * f(B) * T[i0,j1] + | |

f(A) * f(B) * T[i1,j1] + | |

f(1-A) * f(B) * T[i2,j1] + | |

f(2-A) * f(B) * T[i3,j1] + | |

f(1+A) * f(1-B) * T[i0,j2] + | |

f(A) * f(1-B) * T[i1,j2] + | |

f(1-A) * f(1-B) * T[i2,j2] + | |

f(2-A) * f(1-B) * T[i3,j2] + | |

f(1+A) * f(2-B) * T[i0,j3] + | |

f(A) * f(2-B) * T[i1,j3] + | |

f(1-A) * f(2-B) * T[i2,j3] + | |

f(2-A) * f(2-B) * T[i3,j3] | |

If any of the selected T[i,j] in the above equation refer to a border | |

texel with unspecified value, then the border color given by the current | |

setting of TEXTURE_BORDER_COLOR is used instead of the unspecified value. | |

Filter4 texture filtering is currently undefined for 3-dimensional | |

textures. | |

Filter function | |

--------------- | |

The default filter function is implementation dependent. The | |

filter function is specified in table format by calling | |

TexFilterFuncSGIS with <target> set to TEXTURE_1D or TEXTURE_2D, | |

<filter> set to FILTER4_SGIS, and <weights> pointing an array of | |

<n> floating point values. The value <n> must equal 2**m + 1 for | |

some nonnegative integer value of m. | |

The array <weights> contains samples of the filter function f(x), | |

0<=x<=2. Each element <weights>[i] is the value of | |

f((2*i)/(<n>-1)), 0<=i<=<n>-1. | |

The filter function is stored and used by GL as a set of samples | |

f((2*i)/(Size-1)), 0<=i<=Size-1, where Size is an implementation | |

dependent constant. If <n> equals Size, the array <weights> is | |

stored directly in GL state. Otherwise, an implementation | |

dependent resampling method is used to compute the stored samples. | |

Size must equal 2**m + 1 for some integer value of m greater than | |

or equal to 4. The value Size for texture <target> is returned by | |

<params> when GetTexParameteriv or GetTexParameterfv is called | |

with <pname> set to TEXTURE_FILTER4_SIZE_SGIS. | |

Minification vs. Magnification | |

------------------------------ | |

If the magnification filter is given by FILTER4_SGIS, and the | |

minification filter is given by NEAREST_MIPMAP_NEAREST or | |

LINEAR_MIPMAP_NEAREST , then c = 0.5. The parameter c is used to | |

determine whether minification or magnification filtering is done, | |

as described in Section 3.8.2 of the GL Specification (Texture | |

Magnification). | |

Additions to Chapter 4 of the GL Specification (Per-Fragment Operations | |

and the Framebuffer) | |

None | |

Additions to Chapter 5 of the GL Specification (Special Functions) | |

GetTexFilterFuncSGIS is not included in display lists. | |

Additions to Chapter 6 of the GL Specification (State and State Requests) | |

The filter weights for the filter4 filter associated with a | |

texture are queried by calling GetTexFilterFuncSGIS with <target> | |

set to the texture target and <filter> set to FILTER4_SGIS. The | |

Size weight values are returned in the array <weights>, which must | |

have at least Size elements. The value Size is an implementation | |

dependent constant that is queried by the application by calling | |

GetTexParameteriv or GetTexParameterfv as described above. | |

Additions to the GLX Specification | |

None | |

GLX Protocol | |

Two new GL commands are added. | |

The following rendering command is sent to the server as part of | |

a glXRender request: | |

TexFilterFuncSGIS | |

2 16*4n rendering command length | |

2 2064 rendering command opcode | |

4 ENUM target | |

4 ENUM filter | |

4 INT32 n | |

n LISTofFLOATS weights | |

The remaining command is a non-rendering command and as such, is | |

sent separately (i.e., not as part of a glXRender or glXRenderLarge | |

request), using the glXVendorPrivateWithReply request: | |

GetTexFilterFuncSGIS | |

1 CARD8 opcode (X assigned) | |

1 17 GLX opcode (glXVendorPrivateWithReply) | |

2 5 request length | |

4 4101 vendor specific opcode | |

4 GLX_CONTEXT_TAG context tag | |

4 ENUM target | |

4 ENUM filter | |

=> | |

1 1 reply | |

1 unused | |

2 CARD16 sequence number | |

4 m reply length, m = (n==1 ? 0 : n) | |

4 unused | |

4 CARD32 n | |

if (n=1) this follows: | |

4 FLOAT32 params | |

12 unused | |

otherwise this follows: | |

16 unused | |

n*4 LISTofFLOAT32 params | |

Note that n may be zero, indicating that a GL error occurred. | |

Errors | |

INVALID_ENUM is generated if TexFilterFuncSGIS or | |

GetTexFilterFuncSGIS parameter <target> is not TEXTURE_1D or | |

TEXTURE_2D. | |

INVALID_ENUM is generated if TexFilterFuncSGIS or | |

GetTexFilterFuncSGIS parameter <filter> is not FILTER4_SGIS. | |

INVALID_VALUE is generated if TexFilterFuncSGIS parameter <n> does | |

not equal 2**m + 1 for some nonnegative integer value of m. | |

INVALID_ENUM is generated if GetTexParameteriv or GetTexParameterfv | |

parameter <pname> is TEXTURE_FILTER4_SIZE_SGIS and parameter | |

<target> is not TEXTURE_1D or TEXTURE_2D. | |

INVALID_OPERATION is generated if TexFilterFuncSGIS or | |

GetTexFilterFuncSGIS is executed between execution of Begin and the | |

corresponding execution of End. | |

New State | |

Get Value Get Command Type Value Attrib | |

--------- ----------- ---- ------- ------ | |

TEXTURE_FILTER4_FUNC_SGIS GetTexFilterFuncSGIS 2 x Size x R see text texture | |

New Implementation Dependent State | |

Minimum | |

Get Value Get Command Type Value | |

--------- ----------- ---- ------- | |

TEXTURE_FILTER4_SIZE_SGIS GetTexParameterfv R 17 |