skia / external / github.com / KhronosGroup / OpenGL-Registry / eae1d6dde1e283f6fdf803274a2484007e592599 / . / extensions / ARB / ARB_texture_filter_minmax.txt

Name | |

ARB_texture_filter_minmax | |

Name Strings | |

GL_ARB_texture_filter_minmax | |

Contact | |

Jon Leech (oddhack 'at' sonic.net) | |

Pat Brown, NVIDIA Corporation (pbrown 'at' nvidia.com) | |

Contributors | |

Jeff Bolz, NVIDIA Corporation | |

Mark Kilgard, NVIDIA Corporation | |

Eric Werness, NVIDIA Corporation | |

James Helferty, NVIDIA Corporation | |

Daniel Koch, NVIDIA Corporation | |

Notice | |

Copyright (c) 2015 The Khronos Group Inc. Copyright terms at | |

http://www.khronos.org/registry/speccopyright.html | |

Specification Update Policy | |

Khronos-approved extension specifications are updated in response to | |

issues and bugs prioritized by the Khronos OpenGL Working Group. For | |

extensions which have been promoted to a core Specification, fixes will | |

first appear in the latest version of that core Specification, and will | |

eventually be backported to the extension document. This policy is | |

described in more detail at | |

https://www.khronos.org/registry/OpenGL/docs/update_policy.php | |

Status | |

Complete. Approved by the ARB on June 26, 2015. | |

Ratified by the Khronos Board of Promoters on August 7, 2015. | |

Version | |

Version 6, April 20, 2015 | |

Number | |

ARB Extension #188 | |

Dependencies | |

This extension is written against the OpenGL 4.5 Specification (Core | |

Profile), dated February 2, 2015. | |

OpenGL 3.3 is required. | |

This extension interacts with EXT_texture_filter_anisotropic. | |

Overview | |

In unextended OpenGL, minification and magnification filters such as | |

LINEAR allow texture lookups to returned a filtered texel value produced | |

by computing an weighted average of a collection of texels in the | |

neighborhood of the texture coordinate provided. | |

This extension provides a new texture and sampler parameter | |

(TEXTURE_REDUCTION_MODE_ARB) which allows applications to produce a | |

filtered texel value by computing a component-wise minimum (MIN) or | |

maximum (MAX) of the texels that would normally be averaged. The | |

reduction mode is orthogonal to the minification and magnification filter | |

parameters. The filter parameters are used to identify the set of texels | |

used to produce a final filtered value; the reduction mode identifies how | |

these texels are combined. | |

New Procedures and Functions | |

None. | |

New Tokens | |

Accepted by the <pname> parameter to SamplerParameter{i f}{v}, | |

SamplerParameterI{u}iv, GetSamplerParameter{i f}v, | |

GetSamplerParameterI{u}iv, TexParameter{i f}{v}, TexParameterI{u}iv, | |

GetTexParameter{i f}v, GetTexParameterI{u}iv, TextureParameter{i f}{v}, | |

TextureParameterI{u}iv, GetTextureParameter{i f}v, | |

and GetTextureParameterI{u}iv: | |

TEXTURE_REDUCTION_MODE_ARB 0x9366 | |

Accepted by the <param> or <params> parameter to SamplerParameter{i f}{v}, | |

SamplerParameterI{u}iv, TexParameter{i f}{v}, TexParameterI{u}iv, | |

TextureParameter{i f}{v}, and TextureParameterI{u}iv when <pname> is | |

TEXTURE_REDUCTION_MODE_ARB: | |

WEIGHTED_AVERAGE_ARB 0x9367 | |

MIN (reused from core) | |

MAX (reused from core) | |

Modifications to the OpenGL 4.3 Specification (Compatibility Profile) | |

Modify Section 8.10, Texture Parameters | |

(add to Table 8.17, pp 227-228.) | |

Name Type Legal Values | |

-------------------------- ---- -------------------- | |

TEXTURE_REDUCTION_MODE_ARB enum WEIGHTED_AVERAGE_ARB, | |

MIN, MAX | |

[[ jon - Note that the generalized error language for Tex*Parameter* and | |

SamplerParameter* catches the pname/param mismatch for this parameter, | |

previously mentioned explicitly in the "Errors" section of the EXT spec. | |

]] | |

Modify Section 8.14.2, Coordinate Wrapping and Texel Selection | |

(add below the equations specifying the values i_0, j_0, ... beta, gamma | |

on p. 246): | |

... where frac(x) denotes the fractional part of <x>, and may be | |

quantized to a fixed-point value with implementation-dependent | |

precision. | |

Modify Section 8.14.3, Mipmapping | |

(modify the last paragraph in the section, p. 251) | |

The final texture value is then found as: | |

tau = (1 - frac(lambda)) * tau_1 + frac(lambda) * tau_2, | |

where frac(x) denotes the fractional part of <x> and may be quantized to | |

a fixed-point value with implementation-dependent precision. | |

Modify Section 8.17, Texture Completeness | |

[[ Jon - this change is with regard to the 20150421 GL 4.5 spec update and | |

the changes in the completeness list resulting from bug 12791 ]] | |

(modify the last bullet in the section, p. 264, so that this point only | |

applies when the reduction mode samples from two mip levels): | |

* Any of | |

- The internal format of the texture arrays is integer (see tables | |

8.19- 8.20), and the texture reduction mode is WEIGHTED_AVERAGE_ARB; | |

- THe internal format is STENCIL_INDEX; | |

- The internal format is DEPTH_STENCIL, the value of | |

DEPTH_STENCIL_TEXTURE_MODE for the texture is STENCIL_INDEX, and the | |

texture reduction mode is WEIGHTED_AVERAGE_ARB | |

and either the magnification filter is not NEAREST, or the | |

minification filter is neither NEAREST nor NEAREST_MIPMAP_NEAREST. | |

(add a new bullet point expressing the constraints on supported texture | |

formats) | |

* The texture reduction mode is MIN or MAX, and that reduction mode is | |

not supported for the texture dimensionality, multisample state, and | |

internal format. Support for these reduction modes is only | |

guaranteed in the following cases: | |

- The texture is not multisampled (see section 8.8) | |

- The internal format of the texture image is RED | |

[[ Compatibility profile only: add LUMINANCE and INTENSITY ]] | |

- The data type of the texture image is fixed- or floating-point. | |

Implementations may also support these reduction modes for other | |

formats. Such support can be determined by calling | |

GetInternalformat* (see section 22.3) with <pname> | |

TEXTURE_REDUCTION_MODE_ARB. | |

Insert before Section 8.24, sRGB Texture Color Conversion (p. 271) | |

Section 8.23post, Texture Reduction Modes | |

When using minification and magnification filters such as LINEAR, or when | |

using anisotropic texture filtering, the values of multiple texels will | |

normally be combined using a weighted average to produce a filtered | |

texture value. However, a filtered texture value may also be produced by | |

computing per-component minimum and maximum values over the set of texels | |

that would normally be averaged. The texture and sampler parameter | |

TEXTURE_REDUCTION_MODE_EXT controls the process by which multiple texels | |

are combined to produce a filtered texture value. When set to its default | |

state of WEIGHTED_AVERAGE_EXT, a weighted average will be computed, as | |

described in previous sections. | |

When TEXTURE_REDUCTION_MODE_ARB is MIN or MAX, the equations to produce a | |

filtered texel value for LINEAR minification or magnification filters | |

(equation 8.10 and subsequent unnumbered ones) are replaced with | |

tau = reduce((1-alpha)*(1-beta)*(1-gamma), tau_i0_j0_k0, | |

( alpha)*(1-beta)*(1-gamma), tau_i1_j0_k0, | |

(1-alpha)*( beta)*(1-gamma), tau_i0_j1_k0, | |

( alpha)*( beta)*(1-gamma), tau_i1_j1_k0, | |

(1-alpha)*(1-beta)*( gamma), tau_i0_j0_k1, | |

( alpha)*(1-beta)*( gamma), tau_i1_j0_k1, | |

(1-alpha)*( beta)*( gamma), tau_i0_j1_k1, | |

( alpha)*( beta)*( gamma), tau_i1_j1_k1), | |

tau = reduce((1-alpha)*(1-beta), tau_i0_j0, | |

( alpha)*(1-beta), tau_i1_j0, | |

(1-alpha)*( beta), tau_i0_j1, | |

( alpha)*( beta), tau_i1_j1), or | |

tau = reduce((1-alpha), tau_i0, | |

( alpha), tau_i1) | |

for three-, two-, and one-dimensional texture accesses, respectively. The | |

function reduce() is defined to operate on pairs of weights and texel | |

values. If the reduction mode is MIN or MAX, reduce() computes a | |

component-wise minimum or maximum, respectively, of the R, G, B, and A | |

components of the set of provided texels with non-zero weights. | |

For minification filters involving two texture levels | |

(NEAREST_MIPMAP_LINEAR and LINEAR_MIPMAP_LINEAR), filtered values for the | |

two selected levels, tau_1 and tau_2, are produced as described in section | |

8.14.3, but using the reductions described immediately above. The two | |

filtered values will be combined to generate a final result using the | |

equation | |

tau = reduce((1-frac(lambda)), tau_1, | |

( frac(lambda)), tau_2), | |

where tau_1 and tau_2 are filtered values for levels d_1 and d_2, and | |

frac(lambda) is the fractional portion of the texture level of detail and | |

may be quantized to a fixed-point value with implementation-dependent | |

precision. | |

If anisotropic texture filtering is enabled, a reduction mode of | |

WEIGHTED_AVERAGE_ARB will produce a filtered texel value by computing a | |

weighted average of texel values, using an implementation-dependent set of | |

selected texels and weights. When using reduction modes of MIN or MAX, a | |

filtered texel value will be produced using the equation | |

tau = reduce(tau_1, ..., tau_N) | |

where tau_1 through tau_N are the <N> texels that would be used with | |

non-zero weights when a reduction mode of WEIGHTED_AVERAGE_ARB is used. | |

If a texture access using a reduction mode of MIN or MAX is used with a | |

texture access with depth comparisons enabled (see section 8.23.1), the | |

individual tau values used in the reduce() functions should reflect the | |

results of the depth comparison (0.0 or 1.0), not the original values in | |

the depth texture. | |

Modify Section 22.3.1, Supported Operation Queries | |

(add to the table of support pnames starting on p. 542) | |

* TEXTURE_REDUCTION_MODE_ARB: Support for filtering with reduction modes | |

MIN and MAX is returned in <params>. | |

Additions to the AGL/GLX/WGL Specifications | |

None. | |

New State | |

Add to Table 23.23, Textures (state per sampler object) | |

Initial | |

Get Value Type Get Command Value Description Sec. | |

-------------------------- ---- ----------------- -------------------- ------------------------ ----- | |

TEXTURE_REDUCTION_MODE_ARB E GetTexParameteriv WEIGHTED_AVERAGE_ARB Texture reduction mode 8.10 | |

(average, minimum, maximum) | |

New Implementation Dependent State | |

None. | |

Dependencies on EXT_texture_filter_anisotropic | |

If EXT_texture_filter_anisotropic is not supported, references to | |

anisotropic filtering in the discussion of texture reduction modes should | |

be removed. | |

Interactions with the compatibility profile | |

If the compatibility profile is supported, then LUMINANCE and INTENSITY | |

are added to the list of formats guaranteed to support MIN and MAX | |

reduction modes. | |

Issues | |

(1) What should this extension be called? | |

RESOLVED: ARB_texture_filter_minmax, like EXT_texture_filter_minmax on | |

which it is based. | |

(2) How does this extension interact with restrictions on min/mag filters | |

textures with integer components? | |

RESOLVED: In unextended OpenGL 4.3, a texture with integer components | |

(e.g., RGBA8I) is considered incomplete if used with minification or | |

magnification filters that normally average multiple samples (anything | |

other than NEAREST and NEAREST_MIPMAP_NEAREST). This restriction exists | |

to avoid the need to define semantics for computing a weighted average | |

of integer values with non-integer weights, which will produce an | |

arithmetic result that is not an integer. Given that the MIN and MAX | |

reduction modes don't do any arithmetic and won't produce non-integer | |

values, we allow these reduction modes to be used with arbitrary | |

filters. | |

(3) How does this extension interact with TEXTURE_COMPARE_MODE set | |

to COMPARE_R_TO_TEXTURE for depth textures? | |

RESOLVED: This extension does not require support for DEPTH_COMPONENT | |

textures with the new filter modes, but if they are supported, the | |

per-sample comparison should be performed prior to the min/max | |

reduction. | |

This implies the MIN mode for TEXTURE_REDUCTION_MODE_ARB in this case | |

returns a FALSE value if *any* of the texels compare FALSE; to return | |

TRUE, every comparison must be TRUE. Likewise this implies the MAX | |

mode for TEXTURE_REDUCTION_MODE_ARB in this case returns a TRUE value | |

if *any* of the texels compare TRUE; to return FALSE, every comparison | |

must be FALSE. | |

Note that unextended OpenGL 4.5 doesn't require that linear filtering | |

actually average depth comparison results of 0.0 and 1.0, but behaving | |

this way appears to be common practice and may be required for other | |

3D graphics APIs. | |

(4) Do interpolation weights figure into the min/max reductions? | |

RESOLVED: Yes. Texels that would have a weight of zero for the normal | |

WEIGHTED_AVERAGE_ARB reduction modes should not be considered when | |

performing MIN or MAX reductions. | |

Note that implementations may end up quantize the interpolation | |

weights to fixed-point values with implementation-dependent precision. | |

This may cause samples to be ignored in WEIGHTED_AVERAGE_ARB or | |

MIN/MAX reductions. For example, if you are using a minification | |

filter of LINEAR_MIPMAP_LINEAR and the computed LOD is 2.00001, the | |

implementation may round the LOD as being exactly 2.0 and ignore the | |

texels in level 3 for the purposes of trilinear filtering. | |

(5) Should TEXTURE_REDUCTION_MODE_ARB work with stencil textures? | |

RESOLVED: Yes. | |

(6) What are the constraints on supported texture targets and formats? | |

RESOLVED: After conducting a voting exercise, we concluded that the | |

set of supported formats would be limited to single-channel (R/L/I), | |

fixed- or floating-point, and that the GetInternalformat query should | |

be used to expose support for additional formats. | |

RESOLVED: Formats which don't support MIN/MAX reduction are treated as | |

incomplete textures when those reduction modes are set. | |

RESOLVED: TexParameter* does not generate an error when setting | |

MIN/MAX reduction for unsupported texture types. This can't catch all | |

misuse even when not using separate sampler objects, so only having | |

the mismatch affect completeness seems cleaner. | |

DISCUSSION: Different vendors all had different constraints. There | |

were problems with multi-channel textures, multisampled textures, | |

integer textures, and depth component and stencil index textures. | |

Revision History | |

Version 1, 2015/02/20 (Jon Leech) | |

- Branch from EXT_texture_filter_minmax and add issue 6 from ARB | |

discussion. | |

Version 2, 2015/02/25 (Jon Leech) | |

- Rebase against GL 4.5 and change suffixes to ARB. Change minimum | |

required GL version from 1.0 to 3.3 (which is where | |

SamplerParameter* commands were introduced). Add constraints on | |

texture types guaranteed to support MIN/MAX reduction in sections | |

8.17, and query for additional supported types in section 22.3.1. | |

Remove no longer needed Errors section. Update issue 6 with proposed | |

resolution of the format compatibility issue. | |

Version 3, 2015/02/26 (Jon Leech) | |

- Remove DEPTH_COMPONENT from formats guaranteed to be supported, and | |

add LUMINANCE and INTENSITY in the compatibility profile. Clean up | |

state table entry. | |

Version 4, 2015/03/20 (Jon Leech) | |

- Remove nonexistent GREEN and BLUE internal formats. Remove | |

restriction to two-dimensional images (Intel determined they do not | |

require it). Update issues 3 and 6 to track restrictions of various | |

vendor hardware. | |

Version 5, 2015/04/01 (Jon Leech) | |

- Reduce required format support to single-channel (R/L/I), fixed- and | |

floating-point textures only. Remove guaranteed ALPHA format support | |

in the compatibility profile. Reflow text of Issues. | |

Version 6, 2015/04/20 (Jon Leech) | |

- Modify edits to the completeness conditions in section 8.17 based on | |

changes to the GL spec in this area (Bug 12791). |