Name

    ARB_matrix_palette

Name Strings

    GL_ARB_matrix_palette

Contact

    Jon Paul Schelter (jschelte 'at' matrox.com)

Notice

    Copyright (c) 2000-2013 The Khronos Group Inc. Copyright terms at
        http://www.khronos.org/registry/speccopyright.html

Specification Update Policy

    Khronos-approved extension specifications are updated in response to
    issues and bugs prioritized by the Khronos OpenGL Working Group. For
    extensions which have been promoted to a core Specification, fixes will
    first appear in the latest version of that core Specification, and will
    eventually be backported to the extension document. This policy is
    described in more detail at
        https://www.khronos.org/registry/OpenGL/docs/update_policy.php

Status

    Complete. Approved by ARB on December 5, 2000.

Version

    Date: 2004/04/02
    Revision: 0.7

Number

    ARB Extension #16

Dependencies

    ARB_vertex_blend and OpenGL 1.0 are required.
    This extension is written against the ARB_vertex_blend extended
    OpenGL 1.2.1 Specification. 

Overview

    This extension extends the abilities of ARB_vertex_blend to include 
    a palette of modelview matrices.  The n vertex units use a palette
    of m modelview matrices.  (Where n and m are constrained to
    implementation defined maxima.)  Each vertex has a set of n
    indices into the palette, and a corresponding set of n weights.
    Matrix indices can be changed for each vertex (between Begin and
    End).  
    
    When this extension is utilized, the enabled units transform each
    vertex by the modelview matrices specified by the vertices'
    respective indices.  These results are subsequently scaled by the
    weights of the respective units and then summed to create the
    eyespace vertex.   
    
    A similar procedure is followed for normals.  Normals, however,
    are transformed by the inverse transpose of the modelview matrix.
    
IP Status

    Unknown, but believed to be none. 

Issues

       
    Should the matrix palette be loaded by adding MODELVIEWm tokens
    for MatrixMode?

        No, this method is too difficult to extend to an arbitrary
        (implementation defined) size palette,
          and would imply having a 32 entry (minimum) stack per
          matrix. 
        

    Should the Matrix palette be loaded with a new LoadMatrixPalette
    command?

        No, although this provides an easy way to support arbitrary
        palette sizes, the method loses the current (MultMatrix,
        Rotate, Translate, Scale..) matrix functionality.

        Matrices will be Loaded into the palette with current
        functions when MATRIX_MODE is MATRIX_PALETTE_ARB.  The current
        palette index is set by an explicit command:
        CurrentPaletteMatrixARB(). 
    
        
    Should the Matrix Palette have a stack?

        Not required, this wastes a lot of space.  Define the min
        stack depth for the MATRIX_PALETTE_ARB MatrixMode to be 1.
        This alows some implementations to add a stack if desired.

        The stacks established in ARB_vertex_blend for
        MODELVIEW_MATRIXn are still present.
        
        
    Should the matrix palette be gettable?

       Yes, CurrentPaletteMatrixARB() and
       GetIntegerv(CURRENT_PALETTE_MATRIX_ARB, *data) define which
       matrix in the palette is returned by
       GetFloatv(MATRIX_PALETTE_ARB, *data). 

       
    Should MatrixIndexARB be changed to imply LoadMatrix calls to the
    applicable MODELVIEW_MATRIXn stacks?

        No, the MODELVIEW_MATRIXn matrices are unused when
        MATRIX_PALETTE is enabled.
       
    
    Should there be a way to specify that the modelview matrices
    for two different vertex units are identical?

        Not explicitely, but indexing the matrix palette provides this
        functionality. (Both units will have the same matrix index.)
        
    Currently, the MATRIX_PALETTE_ARB enum is used to enable the
    extension, to set the Matrix Mode, and to get the current matrix.
    Is this confusing? Should more enums be added?

        No.
        
New Procedures and Functions

    void CurrentPaletteMatrixARB(int index)
    
    void MatrixIndex{ubusui}vARB(int size, T *indices)
    
    void MatrixIndexPointerARB(int size, enum type, sizei stride,
                           void *pointer)

 
New Tokens

    Accepted by the <pname> parameters of GetFloatv, GetDoublev,
    and IsEnabled, by the <mode> parameter of MatrixMode, and by the
    <cap> parameters of Enable and Disable:

      MATRIX_PALETTE_ARB:                   0x8840

    Accepted by the <pname> parameters of GetIntegerv, GetFloatv, and
    GetDoublev:

      MAX_MATRIX_PALETTE_STACK_DEPTH_ARB    0x8841
      MAX_PALETTE_MATRICES_ARB              0x8842
      CURRENT_PALETTE_MATRIX_ARB            0x8843
      
    Accepted by the <cap> parameters of EnableClientState and
    DisableClientState and by the <pname> parameter of IsEnabled:

      MATRIX_INDEX_ARRAY_ARB:               0x8844

    Accepted by the <pname> parameter of GetFloatv:
    
      CURRENT_MATRIX_INDEX_ARB              0x8845
      
    Accepted by the <pname> parameter of GetIntegerv:
      MATRIX_INDEX_ARRAY_SIZE_ARB           0x8846
      MATRIX_INDEX_ARRAY_TYPE_ARB           0x8847
      MATRIX_INDEX_ARRAY_STRIDE_ARB         0x8848

    Accepted by the <pname> parameter of GetPointerv:
      MATRIX_INDEX_ARRAY_POINTER_ARB        0x8849

Additions to Chapter 2 of the OpenGL 1.2.1 Specification (Operation)

    - (2.6, p. 12) Second paragraph changed to:

          "Each vertex is specified with two, three, or four
          coordinates. In addition, a current normal, current texture
          coordinates, current color, current matrix indices, and
          current weights may be used in processing each vertex. Normals
          are used by the GL in lighting calculations; the current
          normal is a three- dimensional vector that may be set by
          sending three coordinates that specify it. Texture coordinates
          determine how a texture image is mapped onto a
          primitive. Indices are used to select modelview matrices
          from the palette when blending is enabled.  Weights are used
          as blending factors when vertex blending is enabled. One
          weight and one index exists for each enabled vertex blend
          unit.  Vertex units are enabled with Enable, and disabled
          with Disable. Enabling or Disabling a vertex unit not
          supported in the implementation results in the error
          INVALID_OPERATION." 

    - (2.6.3, p. 19) First paragraph changed to:

          "The only GL commands that are allowed within Begin/End
          pairs are the commands for specifying vertex coordinates,
          vertex color, normal coordinates, texture coordinates, matrix
          indices, and weights (Vertex, Color, Index, Normal, TexCoord,
          MatrixIndexARB, WeightARB), the ArrayElement command (see
          section 2.8), the EvalCoord and EvalPoint commands (see
          section 5.1), commands for specifying lighting material
          parameters (Material commands; see section 2.13.2), display
          list invocation commands (CallList and CallLists; see section
          5.4), and the EdgeFlag command. Executing any other GL command
          between the execution of Begin and the corresponding execution
          of End results in the error INVALID_OPERATION. Executing Begin
          after Begin has already been executed but before an End is
          executed generates the INVALID_OPERATION error, as does
          executing End without a previous corresponding Begin."  

    - (2.7, p. 20) Added after the third paragraph:

          "The current weights are set using

              void Weight{bsifd ubusui}vARB(int size, T *weights);

          the floating point values are assigned to the current
          weight vector.  The first <size> current weights are
          replaced with <weights> such that:

              CURRENT_WEIGHT_ARB[i] = <weights>[i]

          When WEIGHT_SUM_UNITY_ARB is enabled,

                                              <size>-1
              CURRENT_WEIGHT_ARB[<size>] = 1 - SUM     <weights>[i]
                                               i=0
                                               
          otherwise the rest of the current weights are set to 0.  If
          <size> is greater than MAX_VERTEX_UNITS_ARB or if
          WEIGHTS_SUM_UNITY_ARB is enabled and <size> equals
          MAX_VERTEX_UNITS_ARB, then the error INVALID_VALUE is
          generated.  When the values are supplied as byte, short, or
          int, they are converted to floating-point values as
          indicated for the corresponting type in Table 2.6.

          The current matrix indices are set using

              void MatrixIndex{ubusui}vARB(int size, T *indices);

          The specified indices are set to the first <size> Vertex
          Unit index values. <size> indicates the count of matrix
          indices in the <indices> array.

          Note that vertex units which are disabled can still receive
          weights and indices."
          

    - (2.8, p. 21) First paragraph changed to read:

          "The vertex specification commands described in section 2.7
          accept data in almost any format, but their use requires
          many command executions to specify even simple geometry.
          Vertex data may also be placed into arrays that are stored
          in the client's address space. Blocks of data in these
          arrays may then be used to specify multiple geometric
          primitives through the execution of a single GL command.
          The client may specify an implementation dependent set of
          arrays: one each to store edge flags, texture coordinates,
          colors, color indices, normals, and vertices, weights, and
          matrix indices. The commands

              void EdgeFlagPointer( sizei stride, void *pointer);

              void TexCoordPointer( int size, enum type, sizei stride,
                void *pointer );

              void ColorPointer( int size, enum type, sizei stride,
                void *pointer );

              void IndexPointer( enum type, sizei stride, void 
                *pointer );

              void NormalPointer( enum type, sizei stride, void
                *pointer );

              void VertexPointer( int size, enum type, sizei stride,
                void *pointer );

              void WeightPointerARB(int size, enum type,
                sizei stride, void *pointer)

              void MatrixIndexPointerARB(int size, enum type, 
                sizei stride, void *pointer)
                           
          describe the locations and organizations of these arrays.
          For each command, type specifies the data type of the
          values stored in the array. Because edge flags are always
          type boolean, EdgeFlagPointer has no type argument. Size,
          when present, indicates the number of values per vertex
          that are stored in the array. Because normals are always
          specified with three values, NormalPointer has no size
          argument. Likewise, because color indices, and edge flags
          are always specified with a single value, IndexPointer, and
          EdgeFlagPointer also have no size argument. Table 2.4
          indicates the allowable values for size and type (when
          present). For type the values BYTE, SHORT, INT, FLOAT, and
          DOUBLE indicates types byte, short, int, float, and double,
          respectively; and the values UNSIGNED_BYTE, UNSIGNED_SHORT,
          and UNSIGNED_INT indicate types ubyte, ushort, and uint,
          respectively. The error INVALID_VALUE is generated if size
          is specified with a value other than that indicated in the
          table.  For implementations supporting vertex blending, note
          that <size> values for WeightPointerARB and
          MatrixIndexPointerARB must be less than the implementation
          defined value MAX_VERTEX_UNITS_ARB."  
         
    - (2.8, p. 22) Change table 2.4 to read:

          Command            Sizes            Types                     
          -------            -----            -----
          VertexPointer      2,3,4            short, int, float,
                                              double 
          NormalPointer      3                byte, short, int, float,
                                              double 
          ColorPointer       3,4              byte, ubyte, short,
                                              ushort, int, uint,
                                              float, double 
          IndexPointer       1                ubyte, short, int,
                                              float, double
          TexCoordPointer    1,2,3,4          short, int, float,
                                              double 
          EdgeFlagPointer    1                boolean
          WeightPointerARB   1..MAX_VERTEX    byte, ubyte, short,
                             _UNITS_ARB       ushort, int, uint,
                                              float, double  

          MatrixIndexPointerARB  1..MAX_VERTEX    unsigned byte, unsigned 
                                 _UNITS_ARB       short, unsigned int


    - (2.8 p. 23) Change paragraph two to:

          "An individual array is enabled or disabled by calling one
      of

              void EnableClientState( enum array );
              void DisableClientState( enum array );

          with array set to EDGE_FLAG_ARRAY, TEXTURE_COORD_ARRAY,
          COLOR_ARRAY, INDEX_ARRAY, NORMAL_ARRAY, VERTEX_ARRAY,
          MATRIX_INDEX_ARRAY_ARB, or WEIGHT_ARRAY_ARB, for the edge
          flag, texture coordinate, color, color index, normal, vertex,
          matrix index, or weight array, respectively. "

    - (2.8 p. 23) Change paragraph three to:

          "The ith element of every enabled array is transferred to
          the GL by calling

              void ArrayElement( int i );

          For each enabled array, it is as though the corresponding
          command from section 2.7 or 2.6.2 were called with a
          pointer to element i. For the vertex array, the
          corresponding command is Vertex[size][type]v, where size is
          one of [2,3,4], and type is one of [s,i,f,d], corresponding
          to array types short, int, float, and double respectively.
          The corresponding commands for the edge flag, texture
          coordinate, color, color index, normal, and weight arrays
          are EdgeFlagv, TexCoord[size][type]v, Color[size][type]v,
          Index[type]v, Normal[type]v, MatrixIndex[type]vARB, and
          Weight[type]vARB, respectively. If the vertex array is
          enabled, it is as though Vertex[size][type]v is executed last,
          after the executions of the other corresponding commands." 

    - (2.10 p. 28) Edit to the last paragraph:

          "Figure 2.6 diagrams the sequence of transformations that are
          applied to vertices.  The vertex coordinates that are
          presented to the GL are termed object coordinates.  The
          model-view matrix is applied to these coordinates to yield eye
          coordinates.  In implementations with vertex blending, all
          enabled modelview matrices are applied to these coordinates,
          and the weighted sum of the results are the eye coordinates.
          Then another matrix, called the projection matrix, is applied
          to eye coordinates to yield clip coordinates.  A perspective
          division is carried out on clip coordinates to yield
          normalized device coordinates.  A final viewport
          transformation is applied to convert these coordinates into
          window coordinates."
    
    - (2.10 p. 29) Edit to the second paragraph:

          "... the vertex's eye coordinates are found as:

            (xe)    n-1               (xo)
            (ye)  =  SUM  w_i * M_i * (yo)
            (ze)    i=0               (zo)
            (we)                      (wo)

          where M_i is the palette matrix associated with the i'th
          Vertex unit:
          
            M_i = MatrixPalette[MatrixIndex[i]], if VERTEX_BLEND_ARB,
            MATRIX_PALETTE_ARB and VERTEX_UNIT_ARB<i> are enabled, and
            M_i = MODELVIEW_MATRIX, otherwise.
            
          w_i is the Vertex's associated weight for vertex unit i:

            w_i = weight_i, if VERTEX_BLEND_ARB, MATRIX_PALETTE_ARB
            and VERTEX_UNIT_ARB<i> are enabled,
            1, if MATRIX_PALETTE_ARB is disabled,

          and,
          
            n = ACTIVE_VERTEX_UNITS_ARB."
          
    - (2.10.2 p. 31) Change the first paragraph to:

          "The projection matrix and model-view matrices are set
          with a variety of commands. The affected matrix is
          determined by the current matrix mode. The current
          matrix mode is set with

            void MatrixMode( enum mode );
 
          which takes one of the pre-defined constants TEXTURE,
          MODELVIEW, COLOR, PROJECTION, MODELVIEWn_ARB,
          MATRIX_PALETTE_ARB.  TEXTURE is described later in section
          2.10.2, and COLOR is described in section 3.6.3. If the
          current matrix mode is MODELVIEW, the matrix operations
          apply to the model-view matrix; if PROJECTION, then they
           apply to the projection matrix. 
 

          In implementations supporting ARB_matrix_palette,

             void CurrentPaletteMatrixARB(int index);
              
          defines which of the palette's matrices is affected by
          subsequent matrix operations when the current matrix mode is
          MATRIX_PALETTE_ARB. CurrentBlendMatrixARB generates the
          error INVALID_VALUE if the <index> parameter is not between
          0 and MAX_PALETTE_MATRICES_ARB.
          The CURRENT_PALETTE_MATRIX_ARB enum can be used to query the
          last value set by CurrentPaletteMatrixARB."  

    - (2.10.2 p. 34) Change to the fourth paragraph:

          "The state required to implement transformations consists of a
          four-valued integer indicating the current matrix mode, a
          stack of at least two 4 x 4 matrices for each of COLOR,
          PROJECTION, and TEXTURE with associated stack pointers, a
          stack of at least 32 4 x 4 matrices with an associated stack
          pointer for MODELVIEW, and a set of MAX_PALETTE_MATRICES_ARB
          stacks of at least 1 4 x 4 matrices each for the matrix palette.
          Initially, there is only one matrix on each stack, and all
          matrices are set to the identity.  The initial matrix mode
          is MODELVIEW. 

    - (2.10.3 p. 35) Added after the second paragraph:

          "When vertex blending is enabled, the normal is transformed
          to eye space by:

                                              n-1
              (nx' ny' nz') = (nx ny nz) Inv ( SUM w_i * Mu_i)
                                              i=0
          
            Alternatively implementations may choose to transform the
          normal to eye-space by:
          
                              n-1
              (nx' ny' nz') =  SUM w_i * (nx ny nz) Inv(Mu_i)
                              i=0

          where Mu_i is the upper leftmost 3x3 matrix taken from the
          modelview for vertex unit i (M_i),
         
               M_i = MatrixPalette[MatrixIndex[i]]
               
          if VERTEX_BLEND_ARB, MATRIX_PALETTE_ARB and VERTEX_UNIT_ARB<i> 
          are enabled, and
          
              M_i = MODELVIEW_MATRIX
         
          otherwise.

          weight_i is the vertex's associated weight for vertex unit i,

              w_i = weight_i
                        
          and

              n = ACTIVE_VERTEX_UNITS_ARB"


Additions to Chapter 3:

      None

Additions to Chapter 4:

      None

Additions to Chapter 5:

      None 

Additions to Chapter 6:

      None

Additions to the GLX Specification

      In progress.

Additions to the GLX Stream Protocol:


    Four new GL rendering commandsl are added. The following commands
    are sent to the server as part of a glXRender request:

        MatrixIndexubvARB
            2           8+n+p           rendering command length
            2           4326            rendering command opcode
            4           INT32           size
            1*n         CARD8           weights
            p                           pad(n)

        MatrixIndexusvARB
            2           8+2*n           rendering command length
            2           4327            rendering command opcode
            4           INT32           size
            2*n         CARD16          weights
            p                           pad(2*n)

        MatrixIndexuivARB
            2           8+4*n           rendering command length
            2           4328            rendering command opcode
            4           INT32           size
            4*n         CARD32          weights

        CurrentPaletteMatrixARB
            2           8               rendering command length
            2           4329            rendering command opcode
            4           INT32           count

Errors
      
      INVALID_VALUE is generated if the <size> parameter for
      MatrixIndexARB or MatrixIndexPointerARB is greater than
      MAX_VERTEX_UNITS_ARB, or if WEIGHT_SUM_UNITY_ARB is enabled
      and <size> is equal to MAX_VERTEX_UNITS_ARB.

      INVALID_VALUE is generated if the <count> parameter to
      CurrentPaletteMatrixARB is greater than MAX_PALETTE_MATRICES_ARB
      or if <count> is equal to zero.

New State

      Modified State in Table 6.5 (p. 195):
                                            Initial 
Get Value                 Get Command Type  Value   Attribute Description
---------                 ----------- ----  ------- --------- -----------
CURRENT_MATRIX_INDEX_ARB  GetIntegerv n*Z+  0       current   array of current matrix indices


      Modified State in Table 6.6 (p. 196):
                                                       Initial
Get Value                         Type   Get Command   Value    Description           Sec.    Attribute
---------                         ----   -----------   -------  -----------           ----    ---------
MATRIX_INDEX_ARRAY_ARB            B      IsEnabled     False    Matrix indices enable  2.8    vertex-array
MATRIX_INDEX_ARRAY_SIZE_ARB       Z+     GetIntegerv   0        Indices per element    2.8    vertex-array
MATRIX_INDEX_ARRAY_TYPE_ARB       Z_3    GetIntegerv   UBYTE    Type of indices        2.8    vertex-array
MATRIX_INDEX_ARRAY_POINTER_ARB    Y      GetPointerv   False    Pointer to the Matrix  2.8    vertex-array
                                                                indices array

      Modified state in Table 6.7 (p. 197) Transformation State:
                                          Initial 
Get Value            Get Command Type     Value     Attribute  Description
---------            ----------- ----     --------- ---------  -----------
MATRIX_PALETTE_ARB   GetFloatv   2*x1*xM4 Identity      -      stack of current modelview matrix in the palette
MATRIX_PALETTE_ARB   IsEnabled   B        FALSE     transform  Enable for ARB_matrix_palette
CURRENT_PALETTE_     GetIntegerv Z+       0         transform  index of current modelview matrix in the
MATRIX_ARB                                                     palette, as set by CurrentPaletteMatrixARB()

                                             
New Implementation Dependent State

      Modified state in Table 6.24 (p. 214) Implementation Dependant Values:

Get Value              Get Command Type Min Value  Description
---------              ----------- ---- ---------  -----------
MAX_MATRIX_PALETTE_    GetIntegerv Z+   1          Max matrix palette stack depth                     
STACK_DEPTH_ARB          

                         
      Modified state in Table 6.25 (p. 215):

Get Value                Get Command Type Min Value    Description
---------                ----------- ---- ---------    -----------
MAX_PALETTE_MATRICES_ARB GetIntegerv Z+   MAX_VERTEX_  Max size of the matrix palette
                                          UNITS_ARB

Additions to Appendix A:

      None


Revision History
    2000/10/17  v 0.3 jschelte - added Usage example.
    2000/11/09  v 0.4 jschelte - cleaned up some "issues".
    2000/11/27  v 0.5 jschelte - closed last issue, fixed typo in Usage
    2000/11/30  v 0.6 jschelte - replaced "blend matrices" with
                                 "palette matrices" 
                               - cleared up some confusion in the
                                 naming of the enum for the current
                                 indices and the current palette
                                 matrix for load/get.
    2004/04/02  v 0.7 Thomas Roell - added GLX protocol    

Addendum: Using this extension.

    // Get the implementation's capabilities
    glGetIntegerv(MAX_VERTEX_UNITS_ARB, *max_blends);
    glGetIntegerv(MAX_PALETTE_MATRICES_ARB, *max_matrices);
    
    //validate that max_blends and max_matrices are sufficient here.
    
    //   enable the units
    glEnable(VERTEX_UNIT_0_ARB);
    glEnable(VERTEX_UNIT_1_ARB);
    glEnable(VERTEX_UNIT_2_ARB);
    glEnable(VERTEX_UNIT_3_ARB);
    
    // Load the matrix Palette
    glMatrixMode(MATRIX_PALETTE_ARB);
    for (i=0; i<palette_size; i++)
    {
        glCurrentPaletteMatrix(i);
        glLoadMatrix(mat[i]);
        // N.B.
        // glGetIntegerv(CURRENT_PALETTE_MATRIX_ARB, &index);
        // ..  will return index==i.
        // glGetFloatv(MATRIX_PALETTE_ARB, &matrix);
        // ..  will return matrix==mat[i].
    }
    
    // Per vertex array
    //   Enable and define the Vertex Arrays:
    //     e.g. V3F C4UB N3F W4F MI4UB T4F
    glEnableClientState(VERTEX_ARRAY);
    glEnableClientState(NORMAL_ARRAY);
    glEnableClientState(COLOR_ARRAY);
    glEnableClientState(TEXTURE_COORD_ARRAY);
    glEnableClientState(WEIGHT_ARRAY_ARB);
    glEnableClientState(MATRIX_INDEX_ARRAY_ARB);
    
    glVertexPointer(3, FLOAT, 3, vertices);
    glNormalPointer(FLOAT, 3, normals);
    glColorPointer(4, UNSIGNED_BYTE, 4, colors);
    glTexCoordPointer(4, FLOAT, 4, texcoords);
    glWeightPointerARB(4, FLOAT, 4, weights);
    glMatrixIndexPointerARB(4, UNSIGNED_BYTE, 4, indices);
    
    //   Draw Primitives from the array
    glDrawArrays(TRIANGLES, 0, vert_array_size);


    // **alternatively**
    typdef struct st_interleaved_vertex {
        FLOAT position[4];
        FLOAT weights[4];
        UNSIGNED_BYTE indices[4];
        FLOAT normal[3];
        FLOAT color[4];
        FLOAT texcoord[4];
        } interleaved_vertex;
    interleaved_vertex vertices[NUM_VERTS];

    // the rest as above, except the Array Pointer definition:
    int stride = sizeof(interleaved_vertex);
    
    glVertexPointer( 3, FLOAT, stride, &(vertices[0].position) );
    glNormalPointer(    FLOAT, stride, &(vertices[0].normal) );
    glColorPointer( 4,  UNSIGNED_BYTE, stride, &(vertices[0].color) );
    glTexCoordPointer( 4,  FLOAT, stride, &(vertices[0].texcoords) );
    glWeightPointerARB( 4, FLOAT, stride, &(vertices[0].weights) );
    glMatrixIndexPointerARB( 4, UNSIGNED_BYTE, stride,
                           &(vertices[0].indices) );