XXX - Not complete yet!!!
Name

    SGIX_color_type

Name Strings

    GLX_SGIX_color_type
    GL_SGIX_color_type

Version
    
    $Date: 1996/10/01 21:31:47 $ $Revision: 1.5 $

Number

    89

Dependencies

    SGIX_fbconfig is required
    SGI_complex affects the definition of this extension
    EXT_histogram affects the definition of this extension
    SGI_color_table affects the definition of this extension

Overview

    This extension enhances the fbconfig types to support extended range
    real and complex data types.  Complex data formats include storage for
    both real and imaginary parts of a color.  The ranges of the data types
    are extended from [0,1] to [-m0.n0,m1.n1], e.g., [-1.5,4.0].  Most
    OpenGL data paths which clamp colors to [0,1] are modified to clamp
    colors to [-m0.n0,m1.n1].  These extended range data types are useful for
    imaging calculations and multipass shading operations that often require
    signed data and/or complex data formats.

Issues

    * two concepts are defined in this extension, color components with
      extended range and storage for complex color components.  I'm not
      sure if the range aspect should be separated from the complex
      storage aspect -- they both extend GLX so it seemed like a time
      saver to group them together

    * how does an application specify the color range it needs to represent?
      should the min/max values be interpreted specially in ChooseConfig
      or should they be of a more limited usefulness exact match style?

    * the spec does not distinguish between old-style [0,1] real color
      and extend range real color (i.e. no attribute bits).  Is this okay?

    * float input pixel values and float colors automatically support the
      extended range.  Integer colors are still scaled to [0,1].
      This means that GetIntegerv of an extended range color can not
      represent an extended color range. Is this okay?
    
    * when the color range is extended this implies that accumulation buffers
      and texture colors also support the extended range. Is this okay?

    * if a component isn't stored in the framebuffer (bits == 0) what should
      range queries return.  0 seems obvious for R, G, and B, but what about
      alpha.  If there is no alpha value, should alpha be the max value?
    
    * do transparent pixel values need to be embellished?

    * is a complex ClearColor and ClearAccum needed?


New Procedures and Functions

    None


New Tokens

    Accepted by the <pname> parameters of GetBooleanv, GetIntegerv,
    GetFloatv, and GetDoublev and accepted by the <attrib_list> parameter of
    glXChooseFBConfigSGIX:

	MIN_RED_SGIX			0x????
	MAX_RED_SGIX			0x????
	MIN_GREEN_SGIX			0x????
	MAX_GREEN_SGIX			0x????
	MIN_BLUE_SGIX			0x????
	MAX_BLUE_SGIX			0x????
	MIN_ALPHA_SGIX			0x????
	MAX_ALPHA_SGIX			0x????
    
    Accepted by the <attributes> parameter of glXGetFBConfigAttribSGIX, and 
    by the <attrib_list> parameter of glXChooseFBConfigSGIX:

        GLX_COLOR_TYPE_SGIX		0x????

	GLX_MIN_RED_SGIX		0x????
	GLX_MAX_RED_SGIX		0x????
	GLX_MIN_GREEN_SGIX		0x????
	GLX_MAX_GREEN_SGIX		0x????
	GLX_MIN_BLUE_SGIX		0x????
	GLX_MAX_BLUE_SGIX		0x????
	GLX_MIN_ALPHA_SGIX		0x????
	GLX_MAX_ALPHA_SGIX		0x????

    Returned by glXGetFBConfigAttribSGIX (when <attribute> is set to 
    GLX_COLOR_TYPE_SGIX) and accepted by the <attrib_list> parameter of 
    glXChooseFBConfigSGIX (following the GLX_COLOR_TYPE_SGIX token):

        GLX_REAL_COLOR_SGIX		0x????
        GLX_COMPLEX_COLOR_SGIX		0x????


Additions to Chapter 2 of the 1.0 Specification (OpenGL Operation)

    Section 2.7 Vertex Specification

    Versions of the Color command that take floating-point values
    accept values nominally between <min> and <max>.  <min> corresponds
    to the minimum value while <max> corresponds to the maximum (machine
    dependent) value that a compone tmay take on in th framebuffer.

    The three component variants of the color command set A to <max>.


    Section 2.12 Colors and Coloring

    Integer colors are still scaled to the range [0,1] and thus cannot
    directly represent colors outside the range [0,1].  Floating-point
    colors can be used to represent colors outside the range [0,1].

    Section 2.12.6 (Clamping or Masking)

    After lighting, RGBA colors are clamped to the range [min, max].

    Section 2.12.9 (Final Color Processing)

    For an RGBA color, each color component (which lies in [min,max]) is
    converted (by rounding to nearest) to a fixed-point value with m bits
    for the each of the real and imaginary parts.  We assume that the
    fixed-point representation used represents each value
    min+(max-min)k/(2^m - 1),
    where k is in {0, 1, ..., 2^m - 1}, as k (e.g. <max> is represented
    in binary as a string of all ones).  m must be at least as large as
    the number of bits in the corresponding component of the framebuffer.  
    If the framebuffer is complex, then m must be at least as large as
    the number of bits in the corresponding real or imaginary part of the
    component of the framebuffer.  

    [are the rules for the msbs of unsigned color values matching the
     framebuffer components true for color ranges outside [0,1]?]


Additions to Chapter 3 of the 1.0 Specification (Rasterization)

    Section 3.6.3 (Rasterization of Pixels)

    Final Expansion to RGBA

    if a group does not contain an A element, then A is added and set to 1.0.
    If any of R, G, or B is missing from the group, each missing element is
    assigned a value of 0.0.

    RGBA to RGBA Lookup

    First, each component is clamped to the range [min,max]. If there is a
    table associated with each of the R, G, B, and A component elements:
    PIXEL_MAP_R_TO_R for R, PIXEL_MAP_G_TO_G for G, PIXEL_MAP_B_TO_B for B,
    and PIXEL_MAP_A_TO_A for A.  Each element is multiplied by t/(max-min)
    where t is an integer one less than the size of the corresponding table,
    and, for each element, and address is found by resounding this value to
    the nearest integer.  For each element, the addressed value in the
    corresponding table replaces the element.

    Histogram

    If HISTOGRAM_EXT is enabled and the width of the table is non-zero, and
    the pixel groups contain RGBA values, then indices Ri, Gi, Bi, and Ai
    are derived from the red, green, blue, and alpha components of each
    pixel group (without modifying these components) by clamping the
    components to [min,max], multiplying each by t/(max-min) where t is one
    less than the width of the histogram table, and rounding each to the
    nearest integer.

    Color Table

    The color components of each group that are being replaced by table
    values are converted to indices by clamping the components to
    [min,max], multiplying each by one t/(max-min) where t is one less than
    the width of the color table, and rounding each to the nearest
    integer.  The component value (R, G, B, or A) is then replaced by the
    value in color table indicated in table E14.2, at the computed index.


    Final Conversion

    For RGBA components each element is clamped to [min,max].  The resulting
    values are converted to fixed-point according to the rules given in
    section 2.12.9 (Final Color Processing).


    Section 3.8 (Texturing)

    Each R, G, B, and A value so extracted is clamped to [min,max]. 
    Each of the four values set by TEXTURE_BORDER_COLOR is clamped to lie
    in [min,max].

    Section 3.8.3 (Texture Environments and Texture Functions)

    TEXTURE_ENV_COLOR is set to an RGBA color by providing four
    single-precision floating-point values in the range [min,max] (values
    outside this range are clamped to it).

    R, G, B, and A values after being obtained from a supplied texture image,
    are in the range [min, max].

    [modifications to table 3.9???]

    Section 3.9 (Fog)

    Each component of Cf is clamped to [min, max] when specified.


Additions to Chapter 4 of the 1.0 Specification (Per-Fragment Operations
and the Frame buffer)

    Color buffers consiste of either unsigned integer color indices or
    R, G, B, and , optionally A unsigned or signed integer values. The
    values may also consist of real and imaginary parts.


    Section 4.1.3 (Alpha Test)

    red is clamped to lie in [min, max], and then converted to a fixed-point
    value according to the rules given for an A component in section 2.12.9.

    Section 4.2.3 (Clearing the Buffers)

    void ClearColor(clampf r, clampf g, clampf b, clampf a);

    sets the clear value for the color buffers in RGBA mode.  Each of the
    specified components is clapmed to [min, max] and converted to fixed-point
    according to the rules of section 2.12.9.

    void ClearAccum(clampf r, clampf g, clampf b, clampf a);

    takes four floating-point arguments that are the values, in order, to which
    to set the R, G, B, and A values of the accumulation buffer (see the next
    section).  These values are clamped to the range [min2,max] where min2
    = minimum(-1,<min>) when they are specified.


    Section 4.2.4 (The Accumulation Buffer)

    Accumulation buffer values are taken to be signed values in the range
    [min2,max] where min2 = minimum(-1,<min>).  Using ACCUM obtains the R, G, 
    B, and A components from the buffer current selected for
    reading (section 4.3.2).  Each component, considered as a fixed-point
    values in [min,max] (see section 2.12.9) is converted to floating-point.
    Each result is then multiplied by value.

    The color components operated on by Accum must be clamped only if the
    operation is RETURN.  In this case, a value sent to the enabled color
    buffers is first clamped to [min,max].  Otherwise, results are undefined
    if the result of an operation on a color component is too large (in
    magnitude) to be represented by the number of available bits.

    4.3.2 (Reading Pixels)

    Conversion to RGBA values

    The R, G, and B (and possibly A) values form a group of elements.  Each
    element is taken to be a fixed-point value in [min,max] with m bits, where
    m is the number of bits in the corresponding color component of the
    selected buffer (see section 2.12.9)

    Final Conversion

    For a component, if the type is FLOAT then each component is first clamped
    to [min, max]; if the type is not FLOAT then each component is first
    clamped to [0,1].  Then the appropriate conversion formula from Table 4.7
    is applied to the component.


Additions to Chapter 5 of the 1.0 Specification (Special Functions)

    None

Additions to Chapter 6 of the 1.0 Specification (State and State Requests)

    None

Additions to the GLX Specification

    [Added to the description of glXChooseFBConfigSGIX ]

    If any of GLX_MIN_RED_SGIX, GLX_MAX_RED_SGIX, GLX_MIN_GREEN_SGIX,
    GLX_MAX_GREEN_SGIX, GLX_MIN_BLUE_SGIX, GLX_MAX_BLUE_SGIX,
    GLX_MIN_ALPHA_SGIX, or GLX_MAX_ALPHA_SGIX are specified in <attrib_list>
    then the value that follows indicates the minimum or maximum value
    which can be represented in the OpenGL pipeline as a color.  Any
    OpenGL state which stores color values (e.g. current color, texture
    data, the color buffer, accumulation buffer, aux buffers, etc) can
    represent values between the minimum and maximum range.  Values
    are specified as integral numerator, denominator pairs (rational
    numbers).
    
    If GLX_COLOR_TYPE_SGIX is in <attrib_list> then the value that follows
    indicates how color values are represented in the framebuffer:

	GLX_REAL_COLOR_SGIX specifies that only the real value of each color
	component is stored in the color and accumulation buffers.
	The actual representation of the data is unspecified, but the
	range that can be represented can be queried using the color
	component min and max requests.

	GLX_COMPLEX_COLOR_SGIX specifies that each color component
	is stored as a complex number.  The distribution of bits
	used to represent the real and imaginary portions of the
	complex number are unspecified as is the actual representation
	of the data (two's complement, sign magnitude, floating point etc).
	GLX_RED_SIZE, GLX_GREEN_SIZE, GLX_BLUE_SIZE, GLX_ALPHA_SIZE
	are equal to the sum of the number of framebuffer bits used to store
	both the real and imaginary parts.
	If an accumulation buffer is present, then it also stores both
	real and imaginary parts for each color component present.
	GLX_ACCUM_RED_SIZE, GLX_ACCUM_GREEN_SIZE, GLX_ACCUM_BLUE_SIZE, and
	GLX_ACCUM_ALPHA_SIZE are equal to the total number of bits used to
	store each complex component.
    
    In general, only non-displayable drawable types (e.g. GLXPbuffers) will
    be able to be created with FBConfigs which support extended range real or
    complex color component types (see GLX_DRAWABLE_TYPE_SGIX).


GLX Protocol

    [tbd]

Dependencies on EXT_histogram

    If EXT_histogram is not implemented, then the references to
    GetHistogramEXT and GetMinmaxEXT in this file are invalid, and should be
    ignored.

Dependencies on SGI_color_table

    If SGI_color_table is not implemented, then the references to
    ColorTableSGI and GetColorTableSGI in this file are invalid, and should
    be ignored.

Dependencies on SGI_complex

    If SGI_complex is not supported, references to GLX_REAL_COLOR_SGIX,
    GLX_COMPLEX_COLOR_SGIX and GLX_COLOR_TYPE_SGIX in this document are
    invalid and should be ignored.

Errors

    None

New State

    None

New Implementation Dependent State

    None