XXX - not complete yet!

Name

    SGIS_texture4D

Name Strings

    GL_SGIS_texture4D

Version

    $Date: 1997/03/15 02:52:10 $ $Revision: 1.25 $

Number

    16

Dependencies

    EXT_abgr affects the definition of this extension
    EXT_texture is required
    EXT_texture3D is required
    EXT_subtexture affects the definition of this extension

Overview

    This extension defines 4-dimensional texture mapping.  If EXT_subtexture
    is supported, this extension also defines a mechanism to redefine a
    portion of an existing 4-dimensional texture image.  Because
    EXT_texture3D is required, this extension utilizes the 3-dimensional
    image support defined in by EXT_texture3D as a base for 4-dimensional
    image manipulation.
    
    The 4th dimension has an abstract, rather than physical, reference
    and will be called "extent", since the definition of extent is "that which
    specifies the range or magnitude of an area or volume."

    Four-dimensional texture mapping is more constrained than its one, two,
    and three-dimensional counterparts.  Mipmapping is not supported, so
    only the level-zero 4-dimensional texture image can be defined.  Cubic
    filtering is not supported, so the border width must be either zero or
    one.

    Four-dimensional textures are used primarily as color lookup tables for
    color conversion.

New Procedures and Functions

    void TexImage4DSGIS(enum target,
		        int level,
		        enum internalformat,
		        sizei width,
		        sizei height,
		        sizei depth,
		        sizei extent,
		        int border,
		        enum format,
		        enum type,
		        const void* pixels);

    void TexSubImage4DSGIS(enum target,
		 	   int level,
			   int xoffset,
		 	   int yoffset,
			   int zoffset,
			   int woffset,
			   sizei width,
			   sizei height,
			   sizei depth,
			   sizei extent,
			   enum format,
			   enum type,
			   const void* pixels);

New Tokens

    Accepted by the <pname> parameter of GetBooleanv, GetIntegerv,
    GetFloatv, and GetDoublev, and by the <pname> parameter of PixelStore:

	PACK_SKIP_VOLUMES_SGIS
	PACK_IMAGE_DEPTH_SGIS
	UNPACK_SKIP_VOLUMES_SGIS
	UNPACK_IMAGE_DEPTH_SGIS

    Accepted by the <cap> parameter of Enable, Disable, and IsEnabled, by
    the <pname> parameter of GetBooleanv, GetIntegerv, GetFloatv, and
    GetDoublev, and by the <target> parameter of TexImage4DSGIS, GetTexImage,
    GetTexLevelParameteriv, GetTexLevelParameterfv, GetTexParameteriv, and
    GetTexParameterfv:

	TEXTURE_4D_SGIS

    Accepted by the <target> parameter of TexImage4DSGIS,
    GetTexLevelParameteriv, and GetTexLevelParameterfv:

	PROXY_TEXTURE_4D_SGIS

    Accepted by the <pname> parameter of GetTexLevelParameteriv and
    GetTexLevelParameterfv:

	TEXTURE_4DSIZE_SGIS

    Accepted by the <pname> parameter of TexParameteriv, TexParameterfv,
    GetTexParameteriv, and GetTexParameterfv:

	TEXTURE_WRAP_Q_SGIS

    Accepted by the <pname> parameter of GetBooleanv, GetIntegerv,
    GetFloatv, and GetDoublev:

	MAX_4D_TEXTURE_SIZE_SGIS
	TEXTURE_4D_BINDING_SGIS


Additions to Chapter 2 of the 1.0 Specification (OpenGL Operation)

    None

Additions to Chapter 3 of the 1.0 Specification (Rasterization)

    XXX - not written yet.  Be sure to handle the null image case.

Additions to Chapter 4 of the 1.0 Specification (Per-Fragment Operations
and the Framebuffer)

    None

Additions to Chapter 5 of the 1.0 Specification (Special Functions)

    TexImage4DSGIS with a proxy target is not included in display
    lists, but is instead executed immediately.

Additions to Chapter 6 of the 1.0 Specification (State and State Requests)

    4-dimensional texture images are queried using GetTexImage with its
    <target> parameter set to TEXTURE_4D_SGIS.  The assignment of texel
    component values to the initial R, G, B, and A components of a pixel
    group is described in EXT_texture.  Pixel transfer and pixel storage
    operations are applied as if the image were 3-dimensional, except that
    the additional pixel storage state values PACK_IMAGE_DEPTH_SGIS and
    PACK_SKIP_VOLUMES_SGIS affect the storage of the image into memory.  The
    correspondence of texels to memory locations is as defined for
    TexImage4DSGIS above, substituting PACK* state for UNPACK* state in all
    occurrences.

Additions to the GLX Specification

    None

GLX Protocol

    A new GL rendering command is added. This command contains pixel data;
    thus it is sent to the server either as part of a glXRender request
    or as part of a glXRenderLarge request:

        TexImage4DSGIS
            2           84+n+p          rendering command length
            2           2057            rendering command opcode
 	    1		BOOL		swap_bytes
	    1		BOOL		lsb_first
	    2 				unused
	    4		CARD32		row_length
	    4		CARD32		image_height
	    4		CARD32		image_depth
	    4		CARD32		skip_rows
	    4		CARD32		skip_images
	    4		CARD32		skip_volumes
	    4		CARD32		skip_pixels
	    4		CARD32		alignment
            4		ENUM		target
	    4		INT32		level
            4		ENUM		internalformat
            4		INT32		width
            4		INT32		height
            4		INT32		depth
            4		INT32		size4d
            4		INT32		border
            4		ENUM		format
            4		ENUM		type
	    4		CARD32		null_image
            n           LISTofBYTE      pixels
            p                           unused, p=pad(n)

            If the command is encoded in a glXRenderLarge request, the command 
            opcode and command length fields above are expanded to 4 bytes each:

	    4           88+n+p          rendering command length
            4           2057            rendering command opcode

	If <width> < 0, <height> < 0, <depth> < 0, <size4d> < 0, <format> is invalid i
	or <type> is invalid, then the command is erroneous and n=0.

        <pixels> is arranged as a sequence of adjacent volumes. Each volume is a
        3-dimensional image, whose structure is determined by the image depth and the 
        parameters <image_height>, <swap_bytes>, <lsb_first>, <row_length>, <skip_rows>,
	<skip_pixels>, <alignment>, <width>, <format>, and <type> given in the request. 
	If <image_depth> is not positive then the number of images (i.e., the image 
	depth) is <depth>; otherwise the number of images is <image_depth>.

        <skip_volumes> allows a sub-piece of the 4-dimensional image to be selected.
        If <skip_volumes> is positive, then the pointer is advanced by <skip_volumes> 
        times the number of elements in one 3-dimensional image. Then <size4d> 
        3-dimensional images are read, each having a subimage extracted in the 
        manner described in Appendix A of the GLX Protocol Specification.

        TexSubImage4DSGIS
            2           88+n+p          rendering command length
            2           2058            rendering command opcode
            1           BOOL            swap_bytes
            1           BOOL            lsb_first
            2                           unused
            4           CARD32          row_length
            4           CARD32          image_height
            4           CARD32          image_depth
            4           CARD32          skip_rows
            4           CARD32          skip_images
            4           CARD32          skip_volumes
            4           CARD32          skip_pixels
            4           CARD32          alignment
            4           ENUM            target
            4           INT32           level
            4           INT32           xoffset
            4           INT32           yoffset
            4           INT32           zoffset
            4           INT32           woffset
            4           INT32           width
            4           INT32           height
            4           INT32           depth
            4           INT32           size4d
            4           ENUM            format
            4           ENUM            type
            4           CARD32		unused
            n           LISTofBYTE      image
            p                           unused, p=pad(n)

            If the command is encoded in a glXRenderLarge request, the command
            opcode and command length fields above are expanded to 4 bytes each:

            4           92+n+p          rendering command length
            4           2058            rendering command opcode

	If <width> < 0, <height> < 0, <depth> < 0, <size4d>, <format> is invalid 
	or <type> is invalid, then the command is erroneous and n=0.

        <pixels> is arranged as a sequence of adjacent volumes. Each volume is a
        3-dimensional image, whose structure is determined by the image height, image 
	depth and the parameters <swap_bytes>, <lsb_first>, <row_length>, <skip_rows>, 
	<skip_pixels>, <alignment>, <width>, <format>, and <type> given in the request. 
	If <image_depth> is not positive then the number of 2Dimages (i.e., the volume
	depth) is <depth>; otherwise the number of 2Dimages is <image_depth>.

        <skip_volumes> allows a sub-volume of the 4-dimensional image to be selected.
        If <skip_volumes> is positive, then the pointer is advanced by <skip_volumes>
        times the number of elements in one 3-dimensional image. Then <size4d>
        3-dimensional images are read, each having a subimage extracted in the
        manner described in Appendix A of the GLX Protocol Specification.

Dependencies on EXT_abgr

    If EXT_abgr is supported, the <format> parameter of TexImage4DSGIS
    accepts ABGR_EXT.  Otherwise it does not.

Dependencies on EXT_texture

    EXT_texture is required.  All of the <components> tokens defined by
    EXT_texture are accepted by the <internalformat> parameter of
    TexImage4DSGIS, with the same semantics that are defined by EXT_texture.

    The query and error extensions defined by EXT_texture are extended in
    this document.

Dependencies on EXT_texture3D

    EXT_texture3D is required, because the 3-dimensional image support that
    it defines is used by this extension, and because it doesn't make sense
    to support 4D textures if 3D textures are not supported.

Dependencies on EXT_subtexture

    If EXT_subtexture is not supported, this extension does not define
    TexSubImage4DSGIS.  All discussion of replacing a subset of the image of
    an existing 4-dimensional texture is void.

Errors

    INVALID_ENUM is generated if TexImage4DSGIS parameter <target> is not
    TEXTURE_4D_SGIS.

    INVALID_VALUE is generated if TexImage4DSGIS parameter <level> is less
    than zero.

    INVALID_ENUM is generated if TexImage4DSGIS parameter <internalformat> is
    not ALPHA, RGB, RGBA, LUMINANCE, LUMINANCE_ALPHA, or one of the tokens
    defined by the EXT_texture extension.  (Values 1, 2, 3, and 4 are not
    accepted as internal formats by TexImage4DSGIS).

    INVALID_VALUE is generated if TexImage4DSGIS parameter <width>, <height>,
    or <depth> is less than zero, or cannot be represented as
    2**k + 2*border for some integer k.

    INVALID_VALUE is generated if TexImage4DSGIS parameter <border> is not 0
    or 1.

    INVALID_ENUM is generated if TexImage4DSGIS parameter <format> is not
    COLOR_INDEX, RED, GREEN, BLUE, ALPHA, RGB, RGBA, LUMINANCE, or
    LUMINANCE_ALPHA (or ABGR_EXT if EXT_abgr is supported).

    INVALID_ENUM is generated if TexImage4DSGIS parameter <type> is not
    UNSIGNED_BYTE, BYTE, UNSIGNED_SHORT, SHORT, UNSIGNED_INT, INT, or FLOAT.

    INVALID_OPERATION is generated if TexImage4DSGIS is called between
    execution of Begin and the corresponding execution of End.

    TEXTURE_TOO_LARGE_SGI is generated if the texture as specified cannot be
    accommodated by the implementation.  This error will not occur if none
    of <width>, <height>, or <depth> is greater than MAX_4D_TEXTURE_SIZE_SGIS.

    INVALID_ENUM is generated by TexSubImage4DSGIS if its <target> parameter
    is not TEXTURE_4D_SGIS.

    INVALID_VALUE is generated by TexSubImage4DSGIS if the specified texture
    array has not been defined by a previous TexImage4DSGIS operation.

    INVALID_VALUE is generated if TexSubImage4DSGIS parameter <level> is not
    equal to zero.

    INVALID_VALUE is generated if TexSubImage4DSGIS parameter <width>,
    <height>, <depth>, or <extent> is negative.
    
    INVALID_VALUE is generated if TexSubImage4DSGIS parameter <xoffset>,
    <yoffset>, <zoffset>, or <woffset> is less than -TEXTURE_BORDER.

    INVALID_VALUE is generated by TexSubImage4DSGIS if
	(xoffset + width) > (TEXTURE_WIDTH - TEXTURE_BORDER), or if
	(yoffset + height) > (TEXTURE_HEIGHT - TEXTURE_BORDER), or if
	(zoffset + depth) > (TEXTURE_DEPTH_EXT - TEXTURE_BORDER), or if
	(woffset + extent) > (TEXTURE_4DSIZE_SGIS - TEXTURE_BORDER).

    INVALID_ENUM is generated if TexSubImage4DSGIS parameter <format> is not
    COLOR_INDEX, RED, GREEN, BLUE, ALPHA, RGB, RGBA, LUMINANCE, or
    LUMINANCE_ALPHA (or ABGR_EXT if EXT_abgr is supported).

    INVALID_ENUM is generated if TexSubImage4DSGIS parameter <type> is not
    UNSIGNED_BYTE, BYTE, UNSIGNED_SHORT, SHORT, UNSIGNED_INT, INT, or FLOAT.

    INVALID_OPERATION is generated if TexSubImage4DSGIS is called between
    execution of Begin and the corresponding execution of End.

New State

    Get Value				Get Command		Type			Initial Value		Attribute
    ---------				-----------		----			-------------		---------
    UNPACK_SKIP_VOLUMES_SGIS		GetIntegerv		Z+			0			    -
    UNPACK_IMAGE_DEPTH_SGIS		GetIntegerv		Z+			0			    -
    PACK_SKIP_VOLUMES_SGIS		GetIntegerv		Z+			0			    -
    PACK_IMAGE_DEPTH_SGIS		GetIntegerv		Z+			0			    -
    TEXTURE_4D_SGIS			IsEnabled		B			FALSE			texture/enable
    TEXTURE_WRAP_Q_SGIS			GetTexParameteriv	1 x Z2			REPEAT			texture
    TEXTURE_4DSIZE_SGIS			GetTexLevelParameteriv	1 x 2 x Z+		0			    -

    TEXTURE				GetTexImage		4 x 1 x levels x I	null			    -
    TEXTURE_RED_SIZE_EXT		GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_GREEN_SIZE_EXT		GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_BLUE_SIZE_EXT		GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_ALPHA_SIZE_EXT		GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_LUMINANCE_SIZE_EXT		GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_INTENSITY_SIZE_EXT		GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_WIDTH			GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_HEIGHT			GetTexLevelParameteriv	3 x 2 x levels x Z+	0			    -
    TEXTURE_DEPTH_EXT			GetTexLevelParameteriv	2 x 2 x levels x Z+	0			    -
    TEXTURE_BORDER			GetTexLevelParameteriv	4 x 2 x levels x Z+	0			    -
    TEXTURE_COMPONENTS (1D and 2D)	GetTexLevelParameteriv	2 x 2 x levels x Z42	1			    -
    TEXTURE_COMPONENTS (3D and 4D)	GetTexLevelParameteriv	2 x 2 x levels x Z38	LUMINANCE		    -
    TEXTURE_BORDER_COLOR		GetTexParameteriv	4 x C			0, 0, 0, 0		texture
    TEXTURE_MIN_FILTER			GetTexParameteriv	4 x Z7			NEAREST_MIPMAP_LINEAR	texture
    TEXTURE_MAG_FILTER			GetTexParameteriv	4 x Z3			LINEAR			texture
    TEXTURE_WRAP_S			GetTexParameteriv	4 x Z2			REPEAT			texture
    TEXTURE_WRAP_T			GetTexParameteriv	3 x Z2			REPEAT			texture
    TEXTURE_WRAP_R_EXT			GetTexParameteriv	2 x Z2			REPEAT			texture

New Implementation Dependent State

    Get Value			Get Command	Type		Minimum Value
    ---------			-----------	----		-------------
    MAX_4D_TEXTURE_SIZE_SGIS	GetIntegerv	Z+		16