Name

    OES_compressed_ETC1_RGB8_texture:

Name Strings

    GL_OES_compressed_ETC1_RGB8_texture

Contact

    Jacob Strom (jacob.strom 'at' ericsson.com)

Notice

    Copyright (c) 2005-2013 The Khronos Group Inc. Copyright terms at
        http://www.khronos.org/registry/speccopyright.html

IP Status

    See Ericsson's "IP Statement"

Status

    Ratified by the Khronos BOP, July 22, 2005.

Version

    Last Modified Date: April 24, 2008

Number

    OpenGL ES Extension #5

Dependencies

    Written based on the wording of the OpenGL ES 1.0 specification

Overview

    The goal of this extension is to allow direct support of
    compressed textures in the Ericsson Texture Compression (ETC)
    formats in OpenGL ES.

    ETC-compressed textures are handled in OpenGL ES using the
    CompressedTexImage2D call.

    The definition of the "internalformat" parameter in the
    CompressedTexImage2D call has been extended to support
    ETC-compressed textures. 


Issues

    Question: "How does the data format correspond to compressed files
    created with tool etcpack?"

    If etcpack is used to convert a .ppm file to this format, the top
    left pixel in the .ppm image will end up in the first block, which
    in turn will end up at u=0, v=0 when sent to
    glCompressedTexImage2D. Thus it works exactly the same way as just
    sending the raw image data from the .ppm format directly to
    glTexImage2D.

New Procedures and Functions

    None


New Tokens

    Accepted by the <internalformat> parameter of CompressedTexImage2D

    ETC1_RGB8_OES           0x8D64

Additions to Chapter 2 of the OpenGL 1.3 Specification (OpenGL
Operation)

    None

Additions to Chapter 3 of the OpenGL 1.3 Specification (Rasterization)

    Add to Table 3.17: Specific Compressed Internal Formats

       Compressed Internal Formats           Base Internal Format
       ===========================           ====================
       ETC1_RGB8_OES                         RGB


    Add to Section 3.8.3, Alternate Image Specification

    ETC1_RGB8_OES:
    ==============
    
    If <internalformat> is ETC1_RGB8_OES, the compressed texture is an
    ETC1 compressed texture. 

    The texture is described as a number of 4x4 pixel blocks. If the
    texture (or a particular mip-level) is smaller than 4 pixels in
    any dimension (such as a 2x2 or a 8x1 texture), the texture is
    found in the upper left part of the block(s), and the rest of the
    pixels are not used. For instance, a texture of size 4x2 will be
    placed in the upper half of a 4x4 block, and the lower half of the
    pixels in the block will not be accessed.

    Pixel a1 (see Figure 3.9.0) of the first block in memory will
    represent the texture coordinate (u=0, v=0). Pixel a2 in the
    second block in memory will be adjacent to pixel m1 in the first
    block, etc until the width of the texture. Then pixel a3 in the
    following block (third block in memory for a 8x8 texture) will be
    adjacent to pixel d1 in the first block, etc until the height of
    the texture. Calling glCompressedTexImage2D to get an 8x8 texture
    using the first, second, third and fourth block shown in Figure
    3.9.0 would have the same effect as calling glTexImage2D where the
    bytes describing the pixels would come in the following memory
    order: a1 e1 i1 m1 a2 e2 i2 m2 b1 f1 j1 n1 b2 f2 j2 n2 c1 g1 k1 o1
    c2 g2 k2 o2 d1 h1 l1 p1 d2 h2 l2 p2 a3 e3 i3 m3 a4 e4 i4 m4 b3 f3
    j3 n3 b4 f4 j4 n4 c3 g3 k3 o3 c4 g4 k4 o4 d3 h3 l3 p3 d4 h4 l4 p4.

    The number of bits that represent a 4x4 texel block is 64 bits if
    <internalformat> is given by ETC1_RGB8_OES.

    The data for a block is a number of bytes, 

    {q0, q1, q2, q3, q4, q5, q6, q7} 

    where byte q0 is located at the lowest memory address and q7 at
    the highest. The 64 bits specifying the block is then represented
    by the following 64 bit integer:

    int64bit = 256*(256*(256*(256*(256*(256*(256*q0+q1)+q2)+q3)+q4)+q5)+q6)+q7;

    Each 64-bit word contains information about a 4x4 pixel block as
    shown in Figure 3.9.1. There are two modes in ETC1; the
    'individual' mode and the 'differential' mode. Which mode is
    active for a particular 4x4 block is controlled by bit 33, which
    we call 'diffbit'. If diffbit = 0, the 'individual' mode is
    chosen, and if diffbit = 1, then the 'differential' mode is
    chosen. The bit layout for the two modes are different: The bit
    layout for the individual mode is shown in Tables 3.17.1a and
    3.17.1c, and the bit layout for the differential mode is laid out
    in Tables 3.17.1b and 3.17.1c.

    In both modes, the 4x4 block is divided into two subblocks of
    either size 2x4 or 4x2. This is controlled by bit 32, which we
    call 'flipbit'. If flipbit=0, the block is divided into two 2x4
    subblocks side-by-side, as shown in Figure 3.9.2. If flipbit=1,
    the block is divided into two 4x2 subblocks on top of each other,
    as shown in Figure 3.9.3. 

    In both individual and differential mode, a 'base color' for each
    subblock is stored, but the way they are stored is different in
    the two modes:

    In the 'individual' mode (diffbit = 0), the base color for
    subblock 1 is derived from the codewords R1 (bit 63-60), G1 (bit
    55-52) and B1 (bit 47-44), see Table 3.17.1a. These four bit
    values are extended to RGB888 by replicating the four higher order
    bits in the four lower order bits. For instance, if R1 = 14 =
    1110b, G1 = 3 = 0011b and B1 = 8 = 1000b, then the red component
    of the base color of subblock 1 becomes 11101110b = 238, and the
    green and blue components become 00110011b = 51 and 10001000b =
    136. The base color for subblock 2 is decoded the same way, but
    using the 4-bit codewords R2 (bit 59-56), G2 (bit 51-48)and B2
    (bit 43-40) instead. In summary, the base colors for the subblocks
    in the individual mode are:

    base col subblock1 = extend_4to8bits(R1, G1, B1)
    base col subblock2 = extend_4to8bits(R2, G2, B2) 

    In the 'differential' mode (diffbit = 1), the base color for
    subblock 1 is derived from the five-bit codewords R1', G1' and
    B1'. These five-bit codewords are extended to eight bits by
    replicating the top three highest order bits to the three lowest
    order bits. For instance, if R1' = 28 = 11100b, the resulting
    eight-bit red color component becomes 11100111b = 231. Likewise,
    if G1' = 4 = 00100b and B1' = 3 = 00011b, the green and blue
    components become 00100001b = 33 and 00011000b = 24
    respectively. Thus, in this example, the base color for subblock 1
    is (231, 33, 24). The five bit representation for the base color
    of subblock 2 is obtained by modifying the 5-bit codewords R1' G1'
    and B1' by the codewords dR2, dG2 and dB2. Each of dR2, dG2 and
    dB2 is a 3-bit two-complement number that can hold values between
    -4 and +3. For instance, if R1' = 28 as above, and dR2 = 100b =
    -4, then the five bit representation for the red color component
    is 28+(-4)=24 = 11000b, which is then extended to eight bits to
    11000110b = 198. Likewise, if G1' = 4, dG2 = 2, B1' = 3 and dB2 =
    0, the base color of subblock 2 will be RGB = (198, 49, 24). In
    summary, the base colors for the subblocks in the differential
    mode are:
 
    base col subblock1 = extend_5to8bits(R1', G1', B1')
    base col subblock2 = extend_5to8bits(R1'+dR2, G1'+dG2, B1'+dG2)

    Note that these additions are not allowed to under- or overflow
    (go below zero or above 31). (The compression scheme can easily
    make sure they don't.) For over- or underflowing values, the
    behavior is undefined for all pixels in the 4x4 block. Note also
    that the extension to eight bits is performed _after_ the
    addition.

    After obtaining the base color, the operations are the same for
    the two modes 'individual' and 'differential'. First a table is
    chosen using the table codewords: For subblock 1, table codeword 1
    is used (bits 39-37), and for subblock 2, table codeword 2 is used
    (bits 36-34), see Table 3.17.1. The table codeword is used to
    select one of eight modifier tables, see Table 3.17.2. For
    instance, if the table code word is 010b = 2, then the modifier
    table [-29, -9, 9 29] is selected. Note that the values in Table
    3.17.2 are valid for all textures and can therefore be hardcoded
    into the decompression unit.
     
    Next, we identify which modifier value to use from the modifier
    table using the two 'pixel index' bits. The pixel index bits are
    unique for each pixel. For instance, the pixel index for pixel d
    (see Figure 3.9.1) can be found in bits 19 (most significant bit,
    MSB), and 3 (least significant bit, LSB), see Table 3.17.1c. Note
    that the pixel index for a particular texel is always stored in
    the same bit position, irrespectively of bits 'diffbit' and
    'flipbit'. The pixel index bits are decoded using table
    3.17.3. If, for instance, the pixel index bits are 01b = 1, and
    the modifier table [-29, -9, 9, 29] is used, then the modifier
    value selected for that pixel is 29 (see table 3.17.3). This
    modifier value is now used to additively modify the base
    color. For example, if we have the base color (231, 8, 16), we
    should add the modifier value 29 to all three components: (231+29,
    8+29, 16+29) resulting in (260, 37, 45). These values are then
    clamped to [0, 255], resulting in the color (255, 37, 45), and we
    are finished decoding the texel.

    ETC1 compressed textures support only 2D images without
    borders. CompressedTexture2D will produce an INVALID_OPERATION if
    <border> is non-zero.


    Add table 3.17.1: Texel Data format for ETC1 compressed
    textures:

    ETC1_RGB8_OES:

    a) bit layout in bits 63 through 32 if diffbit = 0

     63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48
     -----------------------------------------------
    | base col1 | base col2 | base col1 | base col2 |
    | R1 (4bits)| R2 (4bits)| G1 (4bits)| G2 (4bits)|
     -----------------------------------------------

     47 46 45 44 43 42 41 40 39 38 37 36 35 34  33  32
     ---------------------------------------------------
    | base col1 | base col2 | table  | table  |diff|flip|
    | B1 (4bits)| B2 (4bits)| cw 1   | cw 2   |bit |bit |
     ---------------------------------------------------
    
     
    b) bit layout in bits 63 through 32 if diffbit = 1

     63 62 61 60 59 58 57 56 55 54 53 52 51 50 49 48 
     -----------------------------------------------
    | base col1    | dcol 2 | base col1    | dcol 2 |
    | R1' (5 bits) | dR2    | G1' (5 bits) | dG2    |
     -----------------------------------------------
    
     47 46 45 44 43 42 41 40 39 38 37 36 35 34  33  32 
     ---------------------------------------------------
    | base col 1   | dcol 2 | table  | table  |diff|flip|
    | B1' (5 bits) | dB2    | cw 1   | cw 2   |bit |bit |
     ---------------------------------------------------

     
    c) bit layout in bits 31 through 0 (in both cases)

     31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
     -----------------------------------------------
    |       most significant pixel index bits       |
    | p| o| n| m| l| k| j| i| h| g| f| e| d| c| b| a|
     -----------------------------------------------

     15 14 13 12 11 10  9  8  7  6  5  4  3   2   1  0
     --------------------------------------------------
    |         least significant pixel index bits       |  
    | p| o| n| m| l| k| j| i| h| g| f| e| d| c | b | a |
     --------------------------------------------------      
    

    Add table 3.17.2: Intensity modifier sets for ETC1 compressed textures:

    table codeword                modifier table
    ------------------        ----------------------
            0                     -8  -2  2   8 
            1                    -17  -5  5  17
            2                    -29  -9  9  29 
            3                    -42 -13 13  42 
            4                    -60 -18 18  60 
            5                    -80 -24 24  80
            6                   -106 -33 33 106 
            7                   -183 -47 47 183


    Add table 3.17.3 Mapping from pixel index values to modifier values for
    ETC1 compressed textures:

    pixel index value
    ---------------
     msb     lsb           resulting modifier value
    -----   -----          -------------------------
      1       1            -b (large negative value)
      1       0            -a (small negative value)
      0       0             a (small positive value)
      0       1             b (large positive value)
     

    Add figure 3.9.0: Pixel layout for a 8x8 texture using four ETC1
    compressed blocks. Note how pixel a2 in the second block is
    adjacent to pixel m in the first block.

     First block in mem  Second block in mem
     ---- ---- ---- ---- .... .... .... ....  --> u direction
    |a1  |e1  |i1  |m1  |a2  :e2  :i2  :m2  :
    |    |    |    |    |    :    :    :    : 
     ---- ---- ---- ---- .... .... .... ....
    |b1  |f1  |j1  |n1  |b2  :f2  :j2  :n2  : 
    |    |    |    |    |    :    :    :    : 
     ---- ---- ---- ---- .... .... .... ....
    |c1  |g1  |k1  |o1  |c2  :g2  :k2  :o2  : 
    |    |    |    |    |    :    :    :    : 
     ---- ---- ---- ---- .... .... .... ....
    |d1  |h1  |l1  |p1  |d2  :h2  :l2  :p2  : 
    |    |    |    |    |    :    :    :    : 
     ---- ---- ---- ---- ---- ---- ---- ---- 
    :a3  :e3  :i3  :m3  |a4  |e4  |i4  |m4  |
    :    :    :    :    |    |    |    |    |
     .... .... .... .... ---- ---- ---- ---- 
    :b3  :f3  :j3  :n3  |b4  |f4  |j4  |n4  |
    :    :    :    :    |    |    |    |    |
     .... .... .... .... ---- ---- ---- ---- 
    :c3  :g3  :k3  :o3  |c4  |g4  |k4  |o4  |
    :    :    :    :    |    |    |    |    |
     .... .... .... .... ---- ---- ---- ---- 
    :d3  :h3  :l3  :p3  |d4  |h4  |l4  |p4  |
    :    :    :    :    |    |    |    |    |
     .... .... .... .... ---- ---- ---- ---- 
    | Third block in mem  Fourth block in mem
    v
    v direction

    Add figure 3.9.1: Pixel layout for a ETC1 compressed block:

     ---- ---- ---- ---- 
    |a   |e   |i   |m   |
    |    |    |    |    |
     ---- ---- ---- ---- 
    |b   |f   |j   |n   |
    |    |    |    |    |
     ---- ---- ---- ---- 
    |c   |g   |k   |o   |
    |    |    |    |    |
     ---- ---- ---- ---- 
    |d   |h   |l   |p   |
    |    |    |    |    |
     ---- ---- ---- ---- 
     

    Add figure 3.9.2: Two 2x4-pixel subblocks side-by-side:


    subblock 1  subblock 2
     ---- ---- ---- ----
    |a    e   |i    m   |
    |         |         |
    |         |         |
    |b    f   |j    n   |
    |         |         |
    |         |         |
    |c    g   |k    o   |
    |         |         |
    |         |         |
    |d    h   |l    p   |
    |         |         |
     ---- ---- ---- ----


    Add figure 3.9.3: Two 4x2-pixel subblocks on top of each other:

     ---- ---- ---- ----
    |a    e    i    m   |
    |                   |
    |                   | subblock 1
    |b    f    j    n   |
    |                   |
     -------------------
    |c    g    k    o   |
    |                   |
    |                   | subblock 2
    |d    h    l    p   |
    |                   |
     ---- ---- ---- ----

    
Additions to Chapter 4 of the OpenGL 1.3 Specification (Per-Fragment
Operations and the Frame Buffer)

    None

Additions to Chapter 5 of the OpenGL 1.3 Specification (Special
Functions)

    None


Additions to Chapter 6 of the OpenGL 1.3 Specification (State and
State Requests)

    None

Additions to Appendix A of the OpenGL 1.3 Specification (Invariance)

    None

Additions to the AGL/GLX/WGL Specification

    None

GLX Protocol

    None

Errors

    INVALID_OPERATION is generated by CompressedTexSubImage2D,
    TexSubImage2D, or CopyTexSubImage2D if the texture image <level>
    bound to <target> has internal format ETC1_RGB8_OES.

New State

    The queries for NUM_COMPRESSED_TEXTURE_FORMATS and
    COMPRESSED_TEXTURE_FORMATS include ETC1_RGB8_OES.


Revision History
    04/20/2005    0.1    (Jacob Strom)
         - Original draft.
    04/26/2005    0.2    (Jacob Strom)
         - Minor bugfixes.
    05/10/2005    0.3    (Jacob Strom)
         - Minor bugfixes.
    06/30/2005    0.9    (Jacob Strom)
         - Merged iPACKMAN and iPACKMANalpha.
    07/04/2005    0.92   (Jacob Strom)
         - Changed name from iPACKMAN to Ericsson Texture Compression
    07/07/2005    0.98   (Jacob Strom)
         - Removed alpha formats
    07/27/2005    1.00   (Jacob Strom)
         - Added token value for ETC1_RGB8_OES
    07/28/2005    1.001  (Jacob Strom)
         - Changed typos found by Eric Fausett
    10/25/2006    1.1    (Jacob Strom)
         - Added clarification on small textures and endianess
    04/02/2008    1.11   (Jacob Strom)
         - Added clarification on coordinate system orientation
    04/24/2008    1.12   (Jacob Strom)
         - Improve error description