Name

    NV_vertex_array_range

Name Strings

    GL_NV_vertex_array_range

Contact

    Mark J. Kilgard, NVIDIA Corporation (mjk 'at' nvidia.com)

Notice

    Copyright NVIDIA Corporation, 1999, 2000, 2001.

IP Status

    NVIDIA Proprietary.

Status

    Shipping (version 1.1)

    Existing functionality is augmented by NV_vertex_array_range2.

Version

    NVIDIA Date: September 17, 2001 (version 1.1)

Number

    190

Dependencies

    None

Overview

    The goal of this extension is to permit extremely high vertex
    processing rates via OpenGL vertex arrays even when the CPU lacks
    the necessary data movement bandwidth to keep up with the rate
    at which the vertex engine can consume vertices.  CPUs can keep
    up if they can just pass vertex indices to the hardware and
    let the hardware "pull" the actual vertex data via Direct Memory
    Access (DMA).  Unfortunately, the current OpenGL 1.1 vertex array
    functionality has semantic constraints that make such an approach
    hard.  Hence, the vertex array range extension.

    This extension provides a mechanism for deferring the pulling of
    vertex array elements to facilitate DMAed pulling of vertices for
    fast, efficient vertex array transfers.  The OpenGL client need only
    pass vertex indices to the hardware which can DMA the actual index's
    vertex data directly out of the client address space.

    The OpenGL 1.1 vertex array functionality specifies a fairly strict
    coherency model for when OpenGL extracts vertex data from a vertex
    array and when the application can update the in memory
    vertex array data.  The OpenGL 1.1 specification says "Changes
    made to array data between the execution of Begin and the
    corresponding execution of End may affect calls to ArrayElement
    that are made within the same Begin/End period in non-sequential
    ways.  That is, a call to ArrayElement that precedes a change to
    array data may access the changed data, and a call that follows
    a change to array data may access the original data."

    This means that by the time End returns (and DrawArrays and
    DrawElements return since they have implicit Ends), the actual vertex
    array data must be transferred to OpenGL.  This strict coherency model
    prevents us from simply passing vertex element indices to the hardware
    and having the hardware "pull" the vertex data out (which is often
    long after the End for the primitive has returned to the application).

    Relaxing this coherency model and bounding the range from which
    vertex array data can be pulled is key to making OpenGL vertex
    array transfers faster and more efficient.

    The first task of the vertex array range extension is to relax
    the coherency model so that hardware can indeed "pull" vertex
    data from the OpenGL client's address space long after the application
    has completed sending the geometry primitives requiring the vertex
    data.

    The second problem with the OpenGL 1.1 vertex array functionality is
    the lack of any guidance from the API about what region of memory
    vertices can be pulled from.  There is no size limit for OpenGL 1.1
    vertex arrays.  Any vertex index that points to valid data in all
    enabled arrays is fair game.  This makes it hard for a vertex DMA
    engine to pull vertices since they can be potentially pulled from
    anywhere in the OpenGL client address space.

    The vertex array range extension specifies a range of the OpenGL
    client's address space where vertices can be pulled.  Vertex indices
    that access any array elements outside the vertex array range
    are specified to be undefined.  This permits hardware to DMA from
    finite regions of OpenGL client address space, making DMA engine
    implementation tractable.

    The extension is specified such that an (error free) OpenGL client
    using the vertex array range functionality could no-op its vertex
    array range commands and operate equivalently to using (if slower
    than) the vertex array range functionality.

    Because different memory types (local graphics memory, AGP memory)
    have different DMA bandwidths and caching behavior, this extension
    includes a window system dependent memory allocator to allocate
    cleanly the most appropriate memory for constructing a vertex array
    range.  The memory allocator provided allows the application to
    tradeoff the desired CPU read frequency, CPU write frequency, and
    memory priority while still leaving it up to OpenGL implementation
    the exact memory type to be allocated.

Issues

    How does this extension interact with the compiled_vertex_array
    extension?  

       I think they should be independent and not interfere with
       each other.  In practice, if you use NV_vertex_array_range,
       you can surpass the performance of compiled_vertex_array

    Should some explanation be added about what happens when an OpenGL
    application updates its address space in regions overlapping with
    the currently configured vertex array range?

       RESOLUTION:  I think the right thing is to say that you get
       non-sequential results.  In practice, you'll be using an old
       context DMA pointing to the old pages.

       If the application change's its address space within the
       vertex array range, the application should call
       glVertexArrayRangeNV again.  That will re-make a new vertex
       array range context DMA for the application's current address
       space.

    If we are falling back to software transformation, do we still need to
    abide by leaving "undefined" vertices outside the vertex array range?
    For example, pointers that are not 32-bit aligned would likely cause
    a fall back.

       RESOLUTION:  No.  The fact that vertex is "undefined" means we
       can do anything we want (as long as we send a vertex and do not
       crash) so it is perfectly fine for the software puller to
       grab vertex information not available to the hardware puller.

    Should we give a programmer a sense of how big a vertex array
    range they can specify?

       RESOLUTION:  No.  Just document it if there are limitations.
       Probably very hardware and operating system dependent.

    Is it clear enough that language about ArrayElement
    also applies to DrawArrays and DrawElements?

       Maybe not, but OpenGL 1.1 spec is clear that DrawArrays and
       DrawElements are defined in terms of ArrayElement.

    Should glFlush be the same as glVertexArrayRangeFlush?

       RESOLUTION:  No.  A glFlush is cheaper than a glVertexArrayRangeFlush
       though a glVertexArrayRangeFlushNV should do a flush.

    If any the data for any enabled array for a given array element index
    falls outside of the vertex array range, what happens?

       RESOLUTION:  An undefined vertex is generated.

    What error is generated in this case?

       I don't know yet.  We should make sure the hardware really does
       let us know when vertices are undefined.

       Note that this is a little weird for OpenGL since most errors
       in OpenGL result in the command being ignored.  Not in this
       case though.

    Should this extension support an interface for allocating video
    and AGP memory?

       RESOLUTION:  YES.  It seems like we should be able to leave
       the task of memory allocation to DirectDraw, but DirectDraw's
       asynchronous unmapping behavior and having to hold locks to
       update DirectDraw surfaces makes that mechanism to cumbersome.

       Plus the API is a lot easier if we do it ourselves.

    How do we decide what type of memory to allocate for the application?

       RESOLUTION:  Usage hints.  The application rates the read
       frequency (how often will they read the memory), the write
       frequency (how often will they write the memory), and the
       priority (how important is this memory relative to other
       uses for the memory such as texturing) on a scale of 1.0
       to 0.0.  Using these hints and the size of the memory requsted,
       the OpenGL implementation decides where to allocate the memory.

       We try to not directly expose particular types of memory
       (AGP, local memory, cached/uncached, etc) so future memory
       types can be supported by merely updating the OpenGL
       implementation.

    Should the memory allocator functionality be available be a part
    of the GL or window system dependent (GLX or WGL) APIs?

       RESOLUTION:  The window system dependent API.

       The memory allocator should be considered a window system/
       operating system dependent operation.  This also permits
       memory to be allocated when no OpenGL rendering contexts
       exist yet.

New Procedures and Functions

    void VertexArrayRangeNV(sizei length, void *pointer)
    void FlushVertexArrayRangeNV(void)

New Tokens

    Accepted by the <cap> parameter of EnableClientState,
    DisableClientState, and IsEnabled:

        VERTEX_ARRAY_RANGE_NV              0x851D

    Accepted by the <pname> parameter of GetBooleanv, GetIntegerv,
    GetFloatv, and GetDoublev:

        VERTEX_ARRAY_RANGE_LENGTH_NV       0x851E
        VERTEX_ARRAY_RANGE_VALID_NV        0x851F
        MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV  0x8520

    Accepted by the <pname> parameter of GetPointerv:

        VERTEX_ARRAY_RANGE_POINTER_NV      0x8521

Additions to Chapter 2 of the OpenGL 1.1 Specification (OpenGL Operation)

    After the discussion of vertex arrays (Section 2.8) add a
    description of the vertex array range:

    "The command 

       void VertexArrayRangeNV(sizei length, void *pointer)

    specifies the current vertex array range.  When the vertex array
    range is enabled and valid, vertex array vertex transfers from within
    the vertex array range are potentially faster.  The vertex array
    range is a contiguous region of (virtual) address space for placing
    vertex arrays.  The "pointer" parameter is a pointer to the base of
    the vertex array range.  The "length" pointer is the length of the
    vertex array range in basic machine units (typically unsigned bytes).

    The vertex array range address space region extends from "pointer"
    to "pointer + length - 1" inclusive.  When specified and enabled,
    vertex array vertex transfers from within the vertex array range
    are potentially faster.

    There is some system burden associated with establishing a vertex
    array range (typically, the memory range must be locked down).
    If either the vertex array range pointer or size is set to zero,
    the previously established vertex array range is released (typically,
    unlocking the memory).

    The vertex array range may not be established for operating system
    dependent reasons, and therefore, not valid.  Reasons that a vertex
    array range cannot be established include spanning different memory
    types, the memory could not be locked down, alignment restrictions
    are not met, etc.

    The vertex array range is enabled or disabled by calling
    EnableClientState or DisableClientState with the symbolic
    constant VERTEX_ARRAY_RANGE_NV.

    The vertex array range is either valid or invalid and this state can
    be determined by querying VERTEX_ARRAY_RANGE_VALID_NV.  The vertex
    array range is valid when the following conditions are met:

      o  VERTEX_ARRAY_RANGE_NV is enabled.

      o  VERTEX_ARRAY is enabled.

      o  VertexArrayRangeNV has been called with a non-null pointer and
         non-zero size.

      o  The vertex array range has been established.

      o  An implementation-dependent validity check based on the
         pointer alignment, size, and underlying memory type of the
         vertex array range region of memory.

      o  An implementation-dependent validity check based on
         the current vertex array state including the strides, sizes,
         types, and pointer alignments (but not pointer value) for
         currently enabled vertex arrays.

      o  Other implementation-dependent validaity checks based on
         other OpenGL rendering state.

    Otherwise, the vertex array range is not valid.  If the vertex array
    range is not valid, vertex array transfers will not be faster.

    When the vertex array range is valid, ArrayElement commands may
    generate undefined vertices if and only if any indexed elements of
    the enabled arrays are not within the vertex array range or if the
    index is negative or greater or equal to the implementation-dependent
    value of MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV.  If an undefined vertex
    is generated, an INVALID_OPERATION error may or may not be generated.

    The vertex array cohenecy model specifies when vertex data must be
    be extracted from the vertex array memory.  When the vertex array
    range is not valid, (quoting the specification) `Changes made to
    array data between the execution of Begin and the corresponding
    execution of End may effect calls to ArrayElement that are made
    within the same Begin/End period in non-sequential ways.  That is,
    a call to ArrayElement that precedes a change to array data may
    access the changed data, and a call that follows a change to array
    data may access the original data.'

    When the vertex array range is valid, the vertex array coherency
    model is relaxed so that changes made to array data until the next
    "vertex array range flush" may affects calls to ArrayElement in
    non-sequential ways.  That is a call to ArrayElement that precedes
    a change to array data (without an intervening "vertex array range
    flush") may access the changed data, and a call that follows a change
    (without an intervening "vertex array range flush") to array data
    may access original data.

    A 'vertex array range flush' occurs when one of the following
    operations occur:

       o  Finish returns.

       o  FlushVertexArrayRangeNV returns.

       o  VertexArrayRangeNV returns.

       o  DisableClientState of VERTEX_ARRAY_RANGE_NV returns.

       o  EnableClientState of VERTEX_ARRAY_RANGE_NV returns.

       o  Another OpenGL context is made current.

    The client state required to implement the vertex array range
    consists of an enable bit, a memory pointer, an integer size,
    and a valid bit.

    If the memory mapping of pages within the vertex array range changes,
    using the vertex array range may or may not result in undefined data
    being fetched from the vertex arrays when the vertex array range is
    enabled and valid.  To ensure that the vertex array range reflects
    the address space's current state, the application is responsible
    for calling VertexArrayRange again after any memory mapping changes
    within the vertex array range."llo

Additions to Chapter 5 of the OpenGL 1.1 Specification (Special Functions)

    Add to the end of Section 5.4 "Display Lists"

    "VertexArrayRangeNV and FlushVertexArrayRangeNV are not complied
    into display lists but are executed immediately.

    If a display list is compiled while VERTEX_ARRAY_RANGE_NV is
    enabled, the commands ArrayElement, DrawArrays, DrawElements,
    and DrawRangeElements are accumulated into a display list as
    if VERTEX_ARRAY_RANGE_NV is disabled."

Additions to the WGL interface:

    "When establishing a vertex array range, certain types of memory
    may be more efficient than other types of memory.  The commands
     
       void *wglAllocateMemoryNV(sizei size,
                                 float readFrequency,
                                 float writeFrequency,
                                 float priority)
       void wglFreeMemoryNV(void *pointer)
    
    allocate and free memory that may be more suitable for establishing
    an efficient vertex array range than memory allocated by other means.
    The wglAllocateMemoryNV command allocates <size> bytes of contiguous
    memory.  

    The <readFrequency>, <writeFrequency>, and <priority> parameters are
    usage hints that the OpenGL implementation can use to determine the
    best type of memory to allocate.  These parameters range from 0.0
    to 1.0.  A <readFrequency> of 1.0 indicates that the application
    intends to frequently read the allocated memory; a <readFrequency>
    of 0.0 indicates that the application will rarely or never read the
    memory.  A <writeFrequency> of 1.0 indicates that the application
    intends to frequently write the allocated memory; a <writeFrequency>
    of 0.0 indicates that the application will rarely write the memory.
    A <priority> parameter of 1.0 indicates that memory type should be
    the most efficient available memory, even at the expense of (for
    example) available texture memory; a <priority> of 0.0 indicates that
    the vertex array range does not require an efficient memory type
    (for example, so that more efficient memory is available for other
    purposes such as texture memory).

    The OpenGL implementation is free to use the <size>, <readFrequency>,
    <writeFrequency>, and <priority> parameters to determine what memory
    type should be allocated.  The memory types available and how the
    memory type is determined is implementation dependent (and the
    implementation is free to ignore any or all of the above parameters).

    Possible memory types that could be allocated are uncached memory,
    write-combined memory, graphics hardware memory, etc.  The intent
    of the wglAllocateMemoryNV command is to permit the allocation of
    memory for efficient vertex array range usage.  However, there is
    no requirement that memory allocated by wglAllocateMemoryNV must be
    used to allocate memory for vertex array ranges.

    If the memory cannot be allocated, a NULL pointer is returned (and
    no OpenGL error is generated).  An implementation that does not
    support this extension's memory allocation interface is free to
    never allocate memory (always return NULL).

    The wglFreeMemoryNV command frees memory allocated with
    wglAllocateMemoryNV.  The <pointer> should be a pointer returned by
    wglAllocateMemoryNV and not previously freed.  If a pointer is passed
    to wglFreeMemoryNV that was not allocated via wglAllocateMemoryNV
    or was previously freed (without being reallocated), the free is
    ignored with no error reported.

    The memory allocated by wglAllocateMemoryNV should be available to
    all other threads in the address space where the memory is allocated
    (the memory is not private to a single thread).  Any thread in the
    address space (not simply the thread that allocated the memory)
    may use wglFreeMemoryNV to free memory allocated by itself or any
    other thread.

    Because wglAllocateMemoryNV and wglFreeMemoryNV are not OpenGL
    rendering commands, these commands do not require a current context.
    They operate normally even if called within a Begin/End or while
    compiling a display list."

Additions to the GLX Specification

    Same language as the "Additions to the WGL Specification" section
    except all references to wglAllocateMemoryNV and wglFreeMemoryNV
    should be replaced with glXAllocateMemoryNV and glXFreeMemoryNV
    respectively.

    Additional language:

    "OpenGL implementations using GLX indirect rendering should fail
    to set up the vertex array range (failing to set the vertex array
    valid bit so the vertex array range functionality is not usable).
    Additionally, glXAllocateMemoryNV always fails to allocate memory
    (returns NULL) when used with an indirect rendering context."

GLX Protocol

    None

Errors

    INVALID_OPERATION is generated if VertexArrayRange or
    FlushVertexArrayRange is called between the execution of Begin
    and the corresponding execution of End.

    INVALID_OPERATION may be generated if an undefined vertex is
    generated.

New State

                                                            Initial
   Get Value                       Get Command     Type    Value    Attrib
   ---------                       -----------     ----    -------  ------------
   VERTEX_ARRAY_RANGE_NV           IsEnabled       B       False    vertex-array
   VERTEX_ARRAY_RANGE_POINTER_NV   GetPointerv     Z+      0        vertex-array
   VERTEX_ARRAY_RANGE_LENGTH_NV    GetIntegerv     Z+      0        vertex-array
   VERTEX_ARRAY_RANGE_VALID_NV     GetBooleanv     B       False    vertex-array

New Implementation Dependent State

    Get Value                           Get Command     Type    Minimum Value
    ---------                           -----------     -----   -------------
    MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV   GetIntegerv     Z+      65535

NV10 Implementation Details

    This section describes implementation-defined limits for NV10:

         The value of MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV is 65535.

    This section describes bugs in the NV10 vertex array range.  These
    bugs will be fixed in a future hardware release:

         If VERTEX_ARRAY is enabled with a format of GL_SHORT and the
         vertex array range is valid, a vertex array vertex with an X,
         Y, Z, or W coordinate of -32768 is wrongly interpreted as zero.
         Example: the X,Y coordinate (-32768,-32768) is incorrectly read
         as (0,0) from the vertex array.

         If TEXTURE_COORD_ARRAY is enabled with a format of GL_SHORT
         and the vertex array range is valid, a vertex array texture
         coord with an S, T, R, or Q coordinate of -32768 is wrongly
         interpreted as zero.  Example: the S,T coordinate (-32768,-32768)
         is incorrectly read as (0,0) from the texture coord array.

    This section describes the implementation-dependent validity
    checks for NV10.
     
      o  For the NV10 implementation-dependent validity check for the
         vertex array range region of memory to be true, all of the
         following must be true:

         1.  The <pointer> must be 32-byte aligned.

         2.  The underlying memory types must all be the same (all
             standard system memory -OR- all AGP memory -OR- all video
             memory).

     o  For the NV10 implementation-dependent validity check for the
        vertex array state to be true, all of the following must be
        true:

        1.  ( VERTEX_ARRAY must be enabled -AND-
              The vertex array stride must be less than 256 -AND-
              ( ( The vertex array type must be FLOAT -AND-
                  The vertex array stride must be a multiple of 4 bytes -AND-
                  The vertex array pointer must be 4-byte aligned -AND-
                  The vertex array size must be 2, 3, or 4 ) -OR-
                ( The vertex array type must be SHORT -AND-
                  The vertex array stride must be a multiple of 4 bytes -AND-
                  The vertex array pointer must be 4-byte aligned. -AND-
                  The vertex array size must be 2 ) -OR-
                ( The vertex array type must be SHORT -AND-
                  The vertex array stride must be a multiple of 8 bytes -AND-
                  The vertex array pointer must be 8-byte aligned. -AND-
                  The vertex array size must be 3 or 4 ) ) )

        2.  ( NORMAL_ARRAY must be disabled. ) -OR -
            ( NORMAL_ARRAY must be enabled -AND-
              The normal array size must be 3 -AND-
              The normal array stride must be less than 256 -AND-
              ( ( The normal array type must be FLOAT -AND-
                  The normal array stride must be a multiple of 4 bytes -AND-
                  The normal array pointer must be 4-byte aligned. ) -OR-
                ( The normal array type must be SHORT -AND-
                  The normal array stride must be a multiple of 8 bytes -AND-
                  The normal array pointer must be 8-byte aligned. ) ) )
                   
        3.  ( COLOR_ARRAY must be disabled. ) -OR -
            ( COLOR_ARRAY must be enabled -AND-
              The color array type must be FLOAT or UNSIGNED_BYTE -AND-
              The color array stride must be a multiple of 4 bytes -AND-
              The color array stride must be less than 256 -AND-
              The color array pointer must be 4-byte aligned -AND-
              The color array size must be 3 or 4 )

        4.  ( SECONDARY_COLOR_ARRAY must be disabled. ) -OR -
            ( SECONDARY_COLOR_ARRAY must be enabled -AND-
              The secondary color array type must be FLOAT or UNSIGNED_BYTE -AND-
              The secondary color array stride must be a multiple of 4 bytes -AND-
              The secondary color array stride must be less than 256 -AND-
              The secondary color array pointer must be 4-byte aligned -AND-
              The secondary color array size must be 3 or 4 )

        5.  For texture units zero and one:

            ( TEXTURE_COORD_ARRAY must be disabled. ) -OR -
            ( TEXTURE_COORD_ARRAY must be enabled -AND-
              The texture coord array stride must be less than 256 -AND-
              ( ( The texture coord array type must be FLOAT -AND-
                  The texture coord array pointer must be 4-byte aligned. ) 
                  The texture coord array stride must be a multiple of 4 bytes -AND-
                  The texture coord array size must be 1, 2, 3, or 4 ) -OR-
                ( The texture coord array type must be SHORT -AND-
                  The texture coord array pointer must be 4-byte aligned. ) 
                  The texture coord array stride must be a multiple of 4 bytes -AND-
                  The texture coord array size must be 1 ) -OR-
                ( The texture coord array type must be SHORT -AND-
                  The texture coord array pointer must be 4-byte aligned. ) 
                  The texture coord array stride must be a multiple of 4 bytes -AND-
                  The texture coord array size must be 2 ) -OR-
                ( The texture coord array type must be SHORT -AND-
                  The texture coord array pointer must be 8-byte aligned. ) 
                  The texture coord array stride must be a multiple of 8 bytes -AND-
                  The texture coord array size must be 3 ) -OR-
                ( The texture coord array type must be SHORT -AND-
                  The texture coord array pointer must be 8-byte aligned. ) 
                  The texture coord array stride must be a multiple of 8 bytes -AND-
                  The texture coord array size must be 4 ) ) )
            
        6.  ( EDGE_FLAG_ARRAY must be disabled. )

        7.  ( VERTEX_WEIGHT_ARRAY_NV must be disabled. ) -OR -
            ( VERTEX_WEIGHT_ARRAY_NV must be enabled. -AND -
              The vertex weight array type must be FLOAT -AND-
              The vertex weight array size must be 1 -AND-
              The vertex weight array stride must be a multiple of 4 bytes -AND-
              The vertex weight array stride must be less than 256 -AND-
              The vertex weight array pointer must be 4-byte aligned )

        8.  ( FOG_COORDINATE_ARRAY must be disabled. ) -OR -
            ( FOG_COORDINATE_ARRAY must be enabled -AND-
              The chip in use must be an NV11 or NV15, not NV10 -AND-
              The fog coordinate array type must be FLOAT -AND-
              The fog coordinate array size must be 1 -AND-
              The fog coordinate array stride must be a multiple of 4 bytes -AND-
              The fog coordinate array stride must be less than 256 -AND-
              The fog coordinate array pointer must be 4-byte aligned )

     o  For the NV10 the implementation-dependent validity check based on
        other OpenGL rendering state is FALSE if any of the following are true:

        1.  ( COLOR_LOGIC_OP is enabled -AND-
              The logic op is not COPY ), except in the case of Quadro2
            (Quadro2 Pro, Quadro2 MXR) products.

        2.  ( LIGHT_MODEL_TWO_SIDE is true. )

        3.  Either texture unit is enabled and active with a texture
            with a non-zero border.

        4.  VERTEX_PROGRAM_NV is enabled.

        5.  Several other obscure unspecified reasons.

NV20 Implementation Details

    This section describes implementation-defined limits for NV20:

         The value of MAX_VERTEX_ARRAY_RANGE_ELEMENT_NV is 1048575.

    This section describes the implementation-dependent validity
    checks for NV20.

      o  For the NV20 implementation-dependent validity check for the
         vertex array range region of memory to be true, all of the
         following must be true:

         1.  The <pointer> must be 32-byte aligned.

         2.  The underlying memory types must all be the same (all
             standard system memory -OR- all AGP memory -OR- all video
             memory).

     o  To determine whether the NV20 implementation-dependent validity
        check for the vertex array state is true, the following algorithm
        is used:

        The currently enabled arrays and their pointers, strides, and
        types are first determined using the value of VERTEX_PROGRAM_NV.
        If VERTEX_PROGRAM_NV is disabled, the standard GL vertex arrays
        are used.  If VERTEX_PROGRAM_NV is enabled, the vertex attribute
        arrays take precedence over the standard vertex arrays.  The
        following table, taken from the NV_vertex_program specification,
        shows the aliasing between the standard and attribute arrays:

Vertex
Attribute  Conventional                                           Conventional
Register   Per-vertex        Conventional                         Component
Number     Parameter         Per-vertex Parameter Command         Mapping
---------  ---------------   -----------------------------------  ------------
 0         vertex position   Vertex                               x,y,z,w
 1         vertex weights    VertexWeightEXT                      w,0,0,1
 2         normal            Normal                               x,y,z,1
 3         primary color     Color                                r,g,b,a
 4         secondary color   SecondaryColorEXT                    r,g,b,1
 5         fog coordinate    FogCoordEXT                          fc,0,0,1
 6         -                 -                                    -
 7         -                 -                                    -
 8         texture coord 0   MultiTexCoord(GL_TEXTURE0_ARB, ...)  s,t,r,q
 9         texture coord 1   MultiTexCoord(GL_TEXTURE1_ARB, ...)  s,t,r,q
 10        texture coord 2   MultiTexCoord(GL_TEXTURE2_ARB, ...)  s,t,r,q
 11        texture coord 3   MultiTexCoord(GL_TEXTURE3_ARB, ...)  s,t,r,q
 12        texture coord 4   MultiTexCoord(GL_TEXTURE4_ARB, ...)  s,t,r,q
 13        texture coord 5   MultiTexCoord(GL_TEXTURE5_ARB, ...)  s,t,r,q
 14        texture coord 6   MultiTexCoord(GL_TEXTURE6_ARB, ...)  s,t,r,q
 15        texture coord 7   MultiTexCoord(GL_TEXTURE7_ARB, ...)  s,t,r,q

        For the validity check to be TRUE, the following must all be
        true:

        1.  Vertex attribute 0's array must be enabled.
        2.  EDGE_FLAG_ARRAY must be disabled.
        3.  For all enabled arrays, all of the following must be true:
            - the stride must be less than 256
            - the type must be FLOAT, SHORT, or UNSIGNED_BYTE

     o  For the NV20 the implementation-dependent validity check based on
        other OpenGL rendering state is FALSE only for a few obscure and
        unspecified reasons.

Revision History

    January 10, 2001 - Added NV20 implementation details.  Made several
    corrections to the NV10 implementation details.  Specifically, noted
    that on the NV11 and NV15 architectures, the fog coordinate array may
    be used, and updated the section on other state that may cause the
    vertex array range to be invalid.  Only drivers built after this date
    will support fog coordinate arrays on NV11 and NV15.  Also fixed a
    few typos in the spec.

    September 17, 2001 - Modified NV20 implementation details to remove
    all the pointer and stride restrictions, none of which are actually
    required.  Only drivers built after this date will support arbitrary
    pointer offsets and strides.  Also removed NV10 rules on non-zero
    strides, which cannot be used in OpenGL anyhow, and fixed a few other
    typos.