Name

    EXT_timer_query

Name Strings

    GL_EXT_timer_query

Contact

    James Jones, NVIDIA Corporation (jajones 'at' nvidia.com)

Contributors

    Axel Mamode, Sony
    Brian Paul, Tungsten Graphics
    Pat Brown, NVIDIA
    Remi Arnaud, Sony

Status

    Shipping (version 1.0)

    Supported by NVIDIA Release 80 drivers.

Version

    Last Modified Date:         2013/06/25
    Revision:                   3

Number

    319

Dependencies

    Written based on the wording of the OpenGL 2.0 specification.  

    OpenGL 1.5 is required.

    This extension modifies ARB_occlusion_query and NV_occlusion_query.

Overview

    Applications can benefit from accurate timing information in a number of
    different ways.  During application development, timing information can
    help identify application or driver bottlenecks.  At run time,
    applications can use timing information to dynamically adjust the amount
    of detail in a scene to achieve constant frame rates.  OpenGL
    implementations have historically provided little to no useful timing
    information.  Applications can get some idea of timing by reading timers
    on the CPU, but these timers are not synchronized with the graphics
    rendering pipeline.  Reading a CPU timer does not guarantee the completion
    of a potentially large amount of graphics work accumulated before the
    timer is read, and will thus produce wildly inaccurate results.
    glFinish() can be used to determine when previous rendering commands have
    been completed, but will idle the graphics pipeline and adversely affect
    application performance.

    This extension provides a query mechanism that can be used to determine
    the amount of time it takes to fully complete a set of GL commands, and
    without stalling the rendering pipeline.  It uses the query object
    mechanisms first introduced in the occlusion query extension, which allow
    time intervals to be polled asynchronously by the application.

Issues

    What time interval is being measured?

      RESOLVED:  The timer starts when all commands prior to BeginQuery() have
      been fully executed.  At that point, everything that should be drawn by
      those commands has been written to the framebuffer.  The timer stops
      when all commands prior to EndQuery() have been fully executed.

    What unit of time will time intervals be returned in?

      RESOLVED:  Nanoseconds (10^-9 seconds).  This unit of measurement allows
      for reasonably accurate timing of even small blocks of rendering
      commands.  The granularity of the timer is implementation-dependent.  A
      32-bit query counter can express intervals of up to approximately 4
      seconds.

    What should be the minimum number of counter bits for timer queries?

      RESOLVED:  30 bits, which will allow timing sections that take up to 1
      second to render.

    How are counter results of more than 32 bits returned?

      RESOLVED: Using the int64 and uint64 datatypes (introduced in OpenGL
      3.2 and used by this extension as well), and corresponding
      GetQueryObject entry points. These types hold integer values and have
      a minimum bit width of 64.

    Should the extension measure total time elapsed between the full
    completion of the BeginQuery and EndQuery commands, or just time spent in
    the graphics library?
   
      RESOLVED:  This extension will measure the total time elapsed between
      the full completion of these commands.  Future extensions may implement
      a query to determine time elapsed at different stages of the graphics
      pipeline.

    This extension introduces a second query type supported by
    BeginQuery/EndQuery.  Can multiple query types be active simultaneously?

      RESOLVED:  Yes; an application may perform an occlusion query and a
      timer query simultaneously.  An application can not perform multiple
      occlusion queries or multiple timer queries simultaneously.  An
      application also can not use the same query object for an occlusion
      query and a timer query simultaneously.

    Do query objects have a query type permanently associated with them?

      RESOLVED:  No.  A single query object can be used to perform different
      types of queries, but not at the same time.

      Having a fixed type for each query object simplifies some aspects of the
      implementation -- not having to deal with queries with different result
      sizes, for example.  It would also mean that BeginQuery() with a query
      object of the "wrong" type would result in an INVALID_OPERATION error.

    How predictable/repeatable are the results returned by the timer query?

      RESOLVED:  In general, the amount of time needed to render the same
      primitives should be fairly constant.  But there may be many other
      system issues (e.g., context switching on the CPU and GPU, virtual
      memory page faults, memory cache behavior on the CPU and GPU) that can
      cause times to vary wildly.

      Note that modern GPUs are generally highly pipelined, and may be
      processing different primitives in different pipeline stages
      simultaneously.  In this extension, the timers start and stop when the
      BeginQuery/EndQuery commands reach the bottom of the rendering pipeline.
      What that means is that by the time the timer starts, the GL driver on
      the CPU may have started work on GL commands issued after BeginQuery,
      and the higher pipeline stages (e.g., vertex transformation) may have
      started as well.

   What should the new 64 bit integer type be called?
   
      RESOLVED: The new types will be called GLint64/GLuint64  The new
      command suffixes will be i64 and ui64.  These names clearly convey the
      minimum size of the types.  These types are similar to the C99 standard
      type int_least64_t, but we use names similar to the C99 optional type
      int64_t for simplicity.

      (note: previous versions of EXT_timer_query used GLint64EXT and and
      GLuint64EXT. These types were later promoted to core in OpenGL 3.2,
      and this extension was changed to use the core datatypes for
      compatibility with changes to the OpenGL ES EXT_disjoint_timer_query
      extension, which introduces the same query entry points, and would
      have otherwise have had different function signatures).

New Procedures and Functions

     void GetQueryObjecti64vEXT(uint id, enum pname, int64 *params);
     void GetQueryObjectui64vEXT(uint id, enum pname, uint64 *params);

New Tokens

    Accepted by the <target> parameter of BeginQuery, EndQuery, and
    GetQueryiv:

        TIME_ELAPSED_EXT                               0x88BF

Additions to Chapter 2 of the OpenGL 2.0 Specification (OpenGL Operation)
  
    (Modify table 2.1, Correspondence of command suffix letters to GL argument
     types, p. 8) Add two new types and suffixes:
  
    Letter Corresponding GL Type
    ------ ---------------------
    i64    int64
    ui64   uint64
  
    (Modify table 2.2, GL data types, p. 9) Add two new types:
    
              Minimum
    GL Type   Bit Width Description
    --------- --------- ------------------------------------
    int64     64        signed 2's complement binary integer
    uint64    64        unsigned binary integer
    
Additions to Chapter 3 of the OpenGL 2.0 Specification (Rasterization)

    None.

Additions to Chapter 4 of the OpenGL 2.0 Specification (Per-Fragment
Operations and the Framebuffer)

    (Replace Section 4.1.7, Occlusion Queries, p.204)

    Section 4.1.7, Asynchronous Queries

    Asynchronous queries provide a mechanism to return information about the
    processing of a sequence of GL commands.  There are two query types
    supported by the GL.  Occlusion queries (section 4.1.7.1) count the number
    of fragments or samples that pass the depth test.  Timer queries (section
    4.1.12) record the amount of time needed to fully process these commands.

    The results of asynchronous queries are not returned by the GL immediately
    after the completion of the last command in the set; subsequent commands
    can be processed while the query results are not complete.  When
    available, the query results are stored in an associated query object.
    The commands described in section 6.1.12 provide mechanisms to determine
    when query results are available and return the actual results of the
    query.  The name space for query objects is the unsigned integers, with
    zero reserved by the GL.

    Each type of query supported by the GL has an active query object name.
    If the active query object name for a query type is non-zero, the GL is
    currently tracking the information corresponding to that query type and
    the query results will be written into the corresponding query object.  If
    the active query object for a query type name is zero, no such information
    is being tracked.

    A query object is created by calling

        void BeginQuery(enum target, uint id);

    with an unused name <id>.  <target> indicates the type of query to be
    performed; valid values of <target> are defined in subsequent sections.
    When a query object is created, the name <id> is marked as used and
    associated with a new query object.

    BeginQuery sets the active query object name for the query type given by
    <target> to <id>.  If BeginQuery is called with an <id> of zero, if the
    active query object name for <target> is non-zero, or if <id> is the
    active query object name for any query type, the error INVALID_OPERATION
    is generated.

    The command

        void EndQuery(enum target);

    marks the end of the sequence of commands to be tracked for the query type
    given by <target>.  The active query object for <target> is updated to
    indicate that query results are not available, and the active query object
    name for <target> is reset to zero.  When the commands issued prior to
    EndQuery have completed and a final query result is available, the query
    object active when EndQuery is called is updated by the GL.  The query
    object is updated to indicate that the query results are available and to
    contain the query result.  If the active query object name for <target> is
    zero when EndQuery is called, the error INVALID_OPERATION is generated.

    The command

        void GenQueries(sizei n, uint *ids);

    returns <n> previously unused query object names in <ids>. These names are
    marked as used, but no object is associated with them until the first time
    they are used by BeginQuery.

    Query objects are deleted by calling

        void DeleteQueries(sizei n, const uint *ids);

    <ids> contains <n> names of query objects to be deleted. After a query
    object is deleted, its name is again unused.  Unused names in <ids> are
    silently ignored.

    Calling either GenQueries or DeleteQueries while any query of any target
    is active causes an INVALID_OPERATION error to be generated.

    Query objects contain two pieces of state:  a single bit indicating
    whether a query result is available, and an integer containing the query
    result value.  The number of bits used to represent the query result is
    implementation-dependent.  In the initial state of a query object, the
    result is available and its value is zero.

    The necessary state for each query type is an unsigned integer holding the
    active query object name (zero if no query object is active), and any
    state necessary to keep the current results of an asynchronous query in
    progress.

    Section 4.1.7.1, Occlusion Queries

    Occlusion queries use query objects to track the number of fragments or
    samples that pass the depth test.  An occlusion query can be started and
    finished by calling BeginQuery and EndQuery, respectively, with a <target>
    of SAMPLES_PASSED.

    When an occlusion query starts, the samples-passed count maintained by the
    GL is set to zero.  When an occlusion query is active, the samples-passed
    count is incremented for each fragment that passes the depth test.  If the
    value of SAMPLE BUFFERS is 0, then the samples-passed count is incremented
    by 1 for each fragment. If the value of SAMPLE BUFFERS is 1, then the
    samples-passed count is incremented by the number of samples whose
    coverage bit is set. However, implementations, at their discretion, may
    instead increase the samples-passed count by the value of SAMPLES if any
    sample in the fragment is covered.  When an occlusion query finishes and
    all fragments generated by the commands issued prior to EndQuery have been
    generated, the samples-passed count is written to the corresponding query
    object as the query result value, and the query result for that object is
    marked as available.

    If the samples-passed count overflows, (i.e., exceeds the value 2^n - 1,
    where n is the number of bits in the samples-passed count), its value
    becomes undefined.  It is recommended, but not required, that
    implementations handle this overflow case by saturating at 2^n - 1 and
    incrementing no further.

    (Add new Section 4.1.12, Timer Queries, p.212)

    Timer queries use query objects (section 4.1.7) to track the amount of
    time needed to fully complete a set of GL commands.  A timer query can be
    started and finished by calling BeginQuery and EndQuery, respectively,
    with a <target> of TIME_ELAPSED_EXT.

    When BeginQuery and EndQuery are called with a <target> of
    TIME_ELAPSED_EXT, the GL prepares to start and stop the timer used for
    timer queries.  The timer is started or stopped when the effects from all
    previous commands on the GL client and server state and the framebuffer
    have been fully realized.  The BeginQuery and EndQuery commands may return
    before the timer is actually started or stopped.  When the timer query
    timer is finally stopped, the elapsed time (in nanoseconds) is written to
    the corresponding query object as the query result value, and the query
    result for that object is marked as available.

    If the elapsed time overflows the number of bits, <n>, available to hold
    elapsed time, its value becomes undefined.  It is recommended, but not
    required, that implementations handle this overflow case by saturating at
    2^n - 1.

Additions to Chapter 5 of the OpenGL 2.0 Specification (Special Functions)

    None.

Additions to Chapter 6 of the OpenGL 2.0 Specification (State and State
Requests)

    (Replace Section 6.1.12, Occlusion Queries, p. 254)

    Section 6.1.12, Asynchronous Queries

    The command

      boolean IsQuery(uint id);
  
    returns TRUE if <id> is the name of a query object. If <id> is zero, or if
    <id> is a non-zero value that is not the name of a query object, IsQuery
    returns FALSE.

    Information about a query target can be queried with the command

      void GetQueryiv(enum target, enum pname, int *params);

    <target> identifies the query target and can be SAMPLES_PASSED for
    occlusion queries or TIME_ELAPSED_EXT for timer queries.

    If <pname> is CURRENT_QUERY, the name of the currently active query for
    <target>, or zero if no query is active, will be placed in <params>.

    If <pname> is QUERY_COUNTER_BITS, the implementation-dependent number of
    bits used to hold the query result for <target> will be placed in params.
    The number of query counter bits may be zero, in which case the counter
    contains no useful information.

    For occlusion queries (SAMPLES_PASSED), if the number of bits is non-zero,
    the minimum number of bits allowed is a function of the implementation's
    maximum viewport dimensions (MAX_VIEWPORT_DIMS).  The counter must be able
    to represent at least two overdraws for every pixel in the viewport.  The
    formula to compute the allowable minimum value (where n is the minimum
    number of bits) is:

      n = min(32, ceil(log_2(maxViewportWidth * maxViewportHeight * 2))).

    For timer queries (TIME_ELAPSED_EXT), if the minimum number if bits is
    non-zero, it must be at least 30.

    The state of a query object can be queried with the commands

      void GetQueryObjectiv(uint id, enum pname, int *params);
      void GetQueryObjectuiv(uint id, enum pname, uint *params);
      void GetQueryObjecti64vEXT(uint id, enum pname, int64 *params);
      void GetQueryObjectui64vEXT(uint id, enum pname, uint64 *params);      
    If <id> is not the name of a query object, or if the query object named by
    <id> is currently active, then an INVALID_OPERATION error is generated.

    If <pname> is QUERY_RESULT, then the query object's result value is
    returned as a single integer in <params>.  If the value is so large in
    magnitude that it cannot be represented with the requested type, then the
    nearest value representable using the requested type is returned.  If the
    number of query counter bits for any <target> is zero, then the result is
    returned as a single integer with a value of 0.

    There may be an indeterminate delay before the above query returns. If
    <pname> is QUERY_RESULT_AVAILABLE, FALSE is returned if such a delay would
    be required, TRUE is returned otherwise. It must always be true that if
    any query object returns a result available of TRUE, all queries of the
    same type issued prior to that query must also return TRUE.

    Querying the state for any given query object forces the corresponding
    query to complete within a finite amount of time.

    If multiple queries are issued using the same object name prior to calling
    GetQueryObject[u]iv, the result and availability information returned will
    always be from the last query issued.  The results from any queries before
    the last one will be lost if they are not retrieved before starting a new
    query on the same <target> and <id>.
   
GLX Protocol (Modification to the GLX 1.3 Protocol Encoding Specification)

    Add to Section 1.4 (p.2), Common Types
    
        INT64       A 64-bit signed integer value.

        CARD64      A 64-bit unsigned integer value.

    Two new non-rendering GL commands are added.  These commands are sent
    seperately (i.e., not as part of a glXRender or glXRenderLarge request),
    using the glXVendorPrivateWithReply request:
    
        GetQueryObjecti64vEXT
            1           CARD8           opcode (X assigned)
            1           1328            GLX opcode (glXVendorPrivateWithReply)
            2           4               request length
            4           GLX_CONTEXT_TAG context tag    
            4           CARD32          id
            4           ENUM            pname
          =>
            1           1               reply
            1                           unused
            2           CARD16          sequence number
            4           m               reply length, m=(n==1?0:n)
            4                           unused
            4           CARD32          n
    
            if (n=1) this follows:
    
            8           INT64           params
            8                           unused
    
            otherwise this follows:
    
            16                          unused
            n*8         LISTofINT64     params
    
        GetQueryObjectui64vEXT
            1           CARD8           opcode (X assigned)
            1           1329            GLX opcode (glXVendorPrivateWithReply)
            2           4               request length
            4           GLX_CONTEXT_TAG context tag    
            4           CARD32          id
            4           ENUM            pname
          =>
            1           1               reply
            1                           unused
            2           CARD16          sequence number
            4           m               reply length, m=(n==1?0:n)
            4                           unused
            4           CARD32          n
    
           if (n=1) this follows:
    
            8           CARD64          params
            8                           unused
    
            otherwise this follows:
    
            16                          unused
            n*8         CARD64          params
    
Errors

    All existing errors for query objects apply unchanged from the
    ARB_occlusion_query spec, except the modification below:

    The error INVALID_ENUM is generated if BeginQueryARB, EndQueryARB, or
    GetQueryivARB is called where <target> is not SAMPLES_PASSED or
    TIME_ELAPSED_EXT.
    
    The error INVALID_OPERATION is generated if GetQueryObjecti64vEXT or
    GetQueryObjectui64vEXT is called where <id> is not the name of a query
    object.
    
    The error INVALID_OPERATION is generated if GetQueryObjecti64vEXT or
    GetQueryObjectui64vEXT is called where <id> is the name of a currently
    active query object.
    
    The error INVALID_ENUM is generated if GetQueryObjecti64vEXT or
    GetQueryObjectui64vEXT is called where <pname> is not QUERY_RESULT or
    QUERY_RESULT_AVAILABLE.

New State

   (table 6.37, p 298) Update the occlusion query / query object state to
   cover timer queries:

    Get Value               Type  Get Command       Init. Value  Description                Sec    Attribute
    ----------------------  ----  ----------------  -----------  -------------------------  -----  ---------
    CURRENT_QUERY           2xZ+  GetQueryiv        0            Active query object name   4.1.7  -
                                                                   (occlusion and timer)
    QUERY_RESULT            2xZ+  GetQueryObjectiv  0            Query object result        4.1.7  -
                                                                   (samples passed or
                                                                    time elapsed)
    QUERY_RESULT_AVAILABLE  2xB   GetQueryObjectiv  TRUE         Query object result        4.1.7  -
                                                                   available?

New Implementation Dependent State

   (table 6.34, p. 295) Update the occlusion query / query object state to
   cover timer queries:

    Get Value               Type Get Command  Minimum Value  Description                  Sec     Attribute
    --------------------    ---- -----------  -------------  --------------------------   ------  ---------
    QUERY_COUNTER_BITS      2xZ+ GetQueryiv   see 6.1.12     Asynchronous query counter   6.1.12  -
                                                             bits (occlusion and timer 
                                                             queries)

Dependencies on ARB_occlusion_query and NV_occlusion_query

    If ARB_occlusion_query or NV_occlusion_query is supported, the previous
    spec edits are considered to apply to the nearly identical language in
    these extension specifications.  Note that the functionality provided by
    these extensions is included in OpenGL versions 1.5 and greater.

Usage Examples

    Here is some rough sample code that demonstrates the intended usage
    of this extension.

        GLint queries[N];
        GLint available = 0;
        // timer queries can contain more than 32 bits of data, so always
        // query them using the 64 bit types to avoid overflow
        GLuint64 timeElapsed = 0;

        // Create a query object.
        glGenQueries(N, queries);

        // Start query 1
        glBeginQuery(GL_TIME_ELAPSED_EXT, queries[0]);

        // Draw object 1
        ....

        // End query 1
        glEndQuery(GL_TIME_ELAPSED_EXT);

        ...

        // Start query N
        glBeginQuery(GL_TIME_ELAPSED_EXT, queries[N-1]);

        // Draw object N
        ....

        // End query N
        glEndQuery(GL_TIME_ELAPSED_EXT);

        // Wait for all results to become available
        while (!available) {
            glGetQueryObjectiv(queries[N-1], GL_QUERY_RESULT_AVAILABLE, &available);
        }

        for (i = 0; i < N; i++) {
            // See how much time the rendering of object i took in nanoseconds.
            glGetQueryObjectui64vEXT(queries[i], GL_QUERY_RESULT, &timeElapsed);

            // Do something useful with the time.  Note that care should be
            // taken to use all significant bits of the result, not just the
            // least significant 32 bits.
            AdjustObjectLODBasedOnDrawTime(i, timeElapsed);
        }

    This example is sub-optimal in that it stalls at the end of every
    frame to wait for query results.  Ideally, the collection of results
    would be delayed one frame to minimize the amount of time spent
    waiting for the GPU to finish rendering.

Revision History

    Version 3, June 25, 2013 (Jon Leech) - replace int64EXT / uint64EXT with
    core int64/uint64 types, for compatibility with EXT_disjoint_timer_query
    (Bug 10449).