/*
 * MVKCmdDraw.mm
 *
 * Copyright (c) 2015-2020 The Brenwill Workshop Ltd. (http://www.brenwill.com)
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 * 
 *     http://www.apache.org/licenses/LICENSE-2.0
 * 
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */

#include "MVKCmdDraw.h"
#include "MVKCommandBuffer.h"
#include "MVKCommandPool.h"
#include "MVKBuffer.h"
#include "MVKPipeline.h"
#include "MVKFoundation.h"
#include "mvk_datatypes.hpp"


#pragma mark -
#pragma mark MVKCmdBindVertexBuffers

template <size_t N>
VkResult MVKCmdBindVertexBuffers<N>::setContent(MVKCommandBuffer* cmdBuff,
												uint32_t startBinding,
												uint32_t bindingCount,
												const VkBuffer* pBuffers,
												const VkDeviceSize* pOffsets) {

	MVKDevice* mvkDvc = cmdBuff->getDevice();
	_bindings.clear();	// Clear for reuse
    _bindings.reserve(bindingCount);
    MVKMTLBufferBinding b;
    for (uint32_t bindIdx = 0; bindIdx < bindingCount; bindIdx++) {
        MVKBuffer* mvkBuffer = (MVKBuffer*)pBuffers[bindIdx];
        b.index = mvkDvc->getMetalBufferIndexForVertexAttributeBinding(startBinding + bindIdx);
        b.mtlBuffer = mvkBuffer->getMTLBuffer();
        b.offset = mvkBuffer->getMTLBufferOffset() + pOffsets[bindIdx];
        _bindings.push_back(b);
    }

	return VK_SUCCESS;
}

template <size_t N>
void MVKCmdBindVertexBuffers<N>::encode(MVKCommandEncoder* cmdEncoder) {
    for (auto& b : _bindings) { cmdEncoder->_graphicsResourcesState.bindBuffer(kMVKShaderStageVertex, b); }
}

template class MVKCmdBindVertexBuffers<1>;
template class MVKCmdBindVertexBuffers<2>;
template class MVKCmdBindVertexBuffers<8>;


#pragma mark -
#pragma mark MVKCmdBindIndexBuffer

VkResult MVKCmdBindIndexBuffer::setContent(MVKCommandBuffer* cmdBuff,
										   VkBuffer buffer,
										   VkDeviceSize offset,
										   VkIndexType indexType) {
	MVKBuffer* mvkBuffer = (MVKBuffer*)buffer;
	_binding.mtlBuffer = mvkBuffer->getMTLBuffer();
	_binding.offset = mvkBuffer->getMTLBufferOffset() + offset;
	_binding.mtlIndexType = mvkMTLIndexTypeFromVkIndexType(indexType);

	return VK_SUCCESS;
}

void MVKCmdBindIndexBuffer::encode(MVKCommandEncoder* cmdEncoder) {
    cmdEncoder->_graphicsResourcesState.bindIndexBuffer(_binding);
}


#pragma mark -
#pragma mark MVKCmdDraw

VkResult MVKCmdDraw::setContent(MVKCommandBuffer* cmdBuff,
								uint32_t vertexCount,
								uint32_t instanceCount,
								uint32_t firstVertex,
								uint32_t firstInstance) {
	_vertexCount = vertexCount;
	_instanceCount = instanceCount;
	_firstVertex = firstVertex;
	_firstInstance = firstInstance;

    // Validate
    if ((_firstInstance != 0) && !(cmdBuff->getDevice()->_pMetalFeatures->baseVertexInstanceDrawing)) {
        return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDraw(): The current device does not support drawing with a non-zero base instance.");
    }

	return VK_SUCCESS;
}

void MVKCmdDraw::encode(MVKCommandEncoder* cmdEncoder) {

    if (_vertexCount == 0 || _instanceCount == 0) {
        // Nothing to do.
        return;
    }

    auto* pipeline = (MVKGraphicsPipeline*)cmdEncoder->_graphicsPipelineState.getPipeline();

	MVKPiplineStages stages;
    pipeline->getStages(stages);

    const MVKMTLBufferAllocation* vtxOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcPatchOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcLevelBuff = nullptr;
	struct {
		uint32_t inControlPointCount = 0;
		uint32_t patchCount = 0;
	} tessParams;
    uint32_t outControlPointCount = 0;
    if (pipeline->isTessellationPipeline()) {
        tessParams.inControlPointCount = pipeline->getInputControlPointCount();
        outControlPointCount = pipeline->getOutputControlPointCount();
        tessParams.patchCount = mvkCeilingDivide(_vertexCount, tessParams.inControlPointCount) * _instanceCount;
    }
    for (uint32_t s : stages) {
        auto stage = MVKGraphicsStage(s);
        cmdEncoder->finalizeDrawState(stage);	// Ensure all updated state has been submitted to Metal

		if ( !pipeline->hasValidMTLPipelineStates() ) { return; }	// Abort if this pipeline stage could not be compiled.

		id<MTLComputeCommandEncoder> mtlTessCtlEncoder = nil;

		switch (stage) {
            case kMVKGraphicsStageVertex: {
				cmdEncoder->encodeStoreActions(true);
                mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                if (pipeline->needsVertexOutputBuffer()) {
                    vtxOutBuff = cmdEncoder->getTempMTLBuffer(_vertexCount * _instanceCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxVertexOutputComponents);
                    [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                          offset: vtxOutBuff->_offset
                                         atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageVertex]];
                }
				[mtlTessCtlEncoder setStageInRegion: MTLRegionMake2D(_firstVertex, _firstInstance, _vertexCount, _instanceCount)];
				id<MTLComputePipelineState> vtxState = pipeline->getTessVertexStageState();
				if (cmdEncoder->getDevice()->_pMetalFeatures->nonUniformThreadgroups) {
#if MVK_MACOS_OR_IOS
					[mtlTessCtlEncoder dispatchThreads: MTLSizeMake(_vertexCount, _instanceCount, 1)
                                 threadsPerThreadgroup: MTLSizeMake(vtxState.threadExecutionWidth, 1, 1)];
#endif
				} else {
					[mtlTessCtlEncoder dispatchThreadgroups: MTLSizeMake(mvkCeilingDivide(_vertexCount, vtxState.threadExecutionWidth), _instanceCount, 1)
                                      threadsPerThreadgroup: MTLSizeMake(vtxState.threadExecutionWidth, 1, 1)];
				}
                // Mark pipeline, resources, and tess control push constants as dirty
                // so I apply them during the next stage.
                cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                cmdEncoder->_depthStencilState.markDirty();
                cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                break;
			}
            case kMVKGraphicsStageTessControl: {
                mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                if (pipeline->needsTessCtlOutputBuffer()) {
                    tcOutBuff = cmdEncoder->getTempMTLBuffer(outControlPointCount * tessParams.patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerVertexOutputComponents);
                    [mtlTessCtlEncoder setBuffer: tcOutBuff->_mtlBuffer
                                          offset: tcOutBuff->_offset
                                         atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageTessCtl]];
                }
                if (pipeline->needsTessCtlPatchOutputBuffer()) {
                    tcPatchOutBuff = cmdEncoder->getTempMTLBuffer(tessParams.patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerPatchOutputComponents);
                    [mtlTessCtlEncoder setBuffer: tcPatchOutBuff->_mtlBuffer
                                          offset: tcPatchOutBuff->_offset
                                         atIndex: pipeline->getTessCtlPatchOutputBufferIndex()];
                }
                tcLevelBuff = cmdEncoder->getTempMTLBuffer(tessParams.patchCount * sizeof(MTLQuadTessellationFactorsHalf));
                [mtlTessCtlEncoder setBuffer: tcLevelBuff->_mtlBuffer
                                      offset: tcLevelBuff->_offset
                                     atIndex: pipeline->getTessCtlLevelBufferIndex()];
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &tessParams,
                                            sizeof(tessParams),
                                            pipeline->getIndirectParamsIndex().stages[kMVKShaderStageTessCtl]);
                if (pipeline->needsVertexOutputBuffer()) {
                    [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                          offset: vtxOutBuff->_offset
                                         atIndex: kMVKTessCtlInputBufferIndex];
                }
				
				NSUInteger sgSize = pipeline->getTessControlStageState().threadExecutionWidth;
				NSUInteger wgSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
				while (wgSize > cmdEncoder->getDevice()->_pProperties->limits.maxComputeWorkGroupSize[0]) {
					sgSize >>= 1;
					wgSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
				}
				if (cmdEncoder->getDevice()->_pMetalFeatures->nonUniformThreadgroups) {
#if MVK_MACOS_OR_IOS
					[mtlTessCtlEncoder dispatchThreads: MTLSizeMake(tessParams.patchCount * outControlPointCount, 1, 1)
								 threadsPerThreadgroup: MTLSizeMake(wgSize, 1, 1)];
#endif
				} else {
					[mtlTessCtlEncoder dispatchThreadgroups: MTLSizeMake(mvkCeilingDivide(tessParams.patchCount * outControlPointCount, wgSize), 1, 1)
									  threadsPerThreadgroup: MTLSizeMake(wgSize, 1, 1)];
				}
                // Running this stage prematurely ended the render pass, so we have to start it up again.
                // TODO: On iOS, maybe we could use a tile shader to avoid this.
                cmdEncoder->beginMetalRenderPass(true);
                break;
			}
            case kMVKGraphicsStageRasterization:
                if (pipeline->isTessellationPipeline()) {
                    if (pipeline->needsTessCtlOutputBuffer()) {
                        [cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcOutBuff->_mtlBuffer
                                                                offset: tcOutBuff->_offset
                                                               atIndex: kMVKTessEvalInputBufferIndex];
                    }
                    if (pipeline->needsTessCtlPatchOutputBuffer()) {
                        [cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcPatchOutBuff->_mtlBuffer
                                                                offset: tcPatchOutBuff->_offset
                                                               atIndex: kMVKTessEvalPatchInputBufferIndex];
                    }
                    [cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcLevelBuff->_mtlBuffer
                                                            offset: tcLevelBuff->_offset
                                                           atIndex: kMVKTessEvalLevelBufferIndex];
                    [cmdEncoder->_mtlRenderEncoder setTessellationFactorBuffer: tcLevelBuff->_mtlBuffer
                                                                        offset: tcLevelBuff->_offset
                                                                instanceStride: 0];
                    [cmdEncoder->_mtlRenderEncoder drawPatches: outControlPointCount
                                                    patchStart: 0
                                                    patchCount: tessParams.patchCount
                                              patchIndexBuffer: nil
                                        patchIndexBufferOffset: 0
                                                 instanceCount: 1
                                                  baseInstance: 0];
                    // Mark pipeline, resources, and tess control push constants as dirty
                    // so I apply them during the next stage.
                    cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                    cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                    cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                } else {
                    if (cmdEncoder->_pDeviceMetalFeatures->baseVertexInstanceDrawing) {
                        [cmdEncoder->_mtlRenderEncoder drawPrimitives: cmdEncoder->_mtlPrimitiveType
                                                          vertexStart: _firstVertex
                                                          vertexCount: _vertexCount
                                                        instanceCount: _instanceCount
                                                         baseInstance: _firstInstance];
                    } else {
                        [cmdEncoder->_mtlRenderEncoder drawPrimitives: cmdEncoder->_mtlPrimitiveType
                                                          vertexStart: _firstVertex
                                                          vertexCount: _vertexCount
                                                        instanceCount: _instanceCount];
                    }
                }
                break;
        }
    }
}


#pragma mark -
#pragma mark MVKCmdDrawIndexed

VkResult MVKCmdDrawIndexed::setContent(MVKCommandBuffer* cmdBuff,
									   uint32_t indexCount,
									   uint32_t instanceCount,
									   uint32_t firstIndex,
									   int32_t vertexOffset,
									   uint32_t firstInstance) {
	_indexCount = indexCount;
	_instanceCount = instanceCount;
	_firstIndex = firstIndex;
	_vertexOffset = vertexOffset;
	_firstInstance = firstInstance;

    // Validate
	MVKDevice* mvkDvc = cmdBuff->getDevice();
    if ((_firstInstance != 0) && !(mvkDvc->_pMetalFeatures->baseVertexInstanceDrawing)) {
        return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDrawIndexed(): The current device does not support drawing with a non-zero base instance.");
    }
    if ((_vertexOffset != 0) && !(mvkDvc->_pMetalFeatures->baseVertexInstanceDrawing)) {
        return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDrawIndexed(): The current device does not support drawing with a non-zero base vertex.");
    }

	return VK_SUCCESS;
}

void MVKCmdDrawIndexed::encode(MVKCommandEncoder* cmdEncoder) {

    if (_indexCount == 0 || _instanceCount == 0) {
        // Nothing to do.
        return;
    }

    auto* pipeline = (MVKGraphicsPipeline*)cmdEncoder->_graphicsPipelineState.getPipeline();

	MVKPiplineStages stages;
    pipeline->getStages(stages);

    MVKIndexMTLBufferBinding& ibb = cmdEncoder->_graphicsResourcesState._mtlIndexBufferBinding;
    size_t idxSize = mvkMTLIndexTypeSizeInBytes((MTLIndexType)ibb.mtlIndexType);
    VkDeviceSize idxBuffOffset = ibb.offset + (_firstIndex * idxSize);

    const MVKMTLBufferAllocation* vtxOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcPatchOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcLevelBuff = nullptr;
	struct {
		uint32_t inControlPointCount = 0;
		uint32_t patchCount = 0;
	} tessParams;
    uint32_t outControlPointCount = 0;
    if (pipeline->isTessellationPipeline()) {
        tessParams.inControlPointCount = pipeline->getInputControlPointCount();
        outControlPointCount = pipeline->getOutputControlPointCount();
        tessParams.patchCount = mvkCeilingDivide(_indexCount, tessParams.inControlPointCount) * _instanceCount;
    }
    for (uint32_t s : stages) {
        auto stage = MVKGraphicsStage(s);
        id<MTLComputeCommandEncoder> mtlTessCtlEncoder = nil;
        cmdEncoder->finalizeDrawState(stage);	// Ensure all updated state has been submitted to Metal

		if ( !pipeline->hasValidMTLPipelineStates() ) { return; }	// Abort if this pipeline stage could not be compiled.

        switch (stage) {
            case kMVKGraphicsStageVertex: {
				cmdEncoder->encodeStoreActions(true);
                mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                if (pipeline->needsVertexOutputBuffer()) {
                    vtxOutBuff = cmdEncoder->getTempMTLBuffer(_indexCount * _instanceCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxVertexOutputComponents);
                    [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                          offset: vtxOutBuff->_offset
                                         atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageVertex]];
                }
				[mtlTessCtlEncoder setBuffer: ibb.mtlBuffer
                                      offset: idxBuffOffset
                                     atIndex: pipeline->getIndirectParamsIndex().stages[kMVKShaderStageVertex]];
				[mtlTessCtlEncoder setStageInRegion: MTLRegionMake2D(_vertexOffset, _firstInstance, _indexCount, _instanceCount)];
				id<MTLComputePipelineState> vtxState = ibb.mtlIndexType == MTLIndexTypeUInt16 ? pipeline->getTessVertexStageIndex16State() : pipeline->getTessVertexStageIndex32State();
				if (cmdEncoder->getDevice()->_pMetalFeatures->nonUniformThreadgroups) {
#if MVK_MACOS_OR_IOS
					[mtlTessCtlEncoder dispatchThreads: MTLSizeMake(_indexCount, _instanceCount, 1)
                                 threadsPerThreadgroup: MTLSizeMake(vtxState.threadExecutionWidth, 1, 1)];
#endif
				} else {
					[mtlTessCtlEncoder dispatchThreadgroups: MTLSizeMake(mvkCeilingDivide(_indexCount, vtxState.threadExecutionWidth), _instanceCount, 1)
                                      threadsPerThreadgroup: MTLSizeMake(vtxState.threadExecutionWidth, 1, 1)];
				}
                // Mark pipeline, resources, and tess control push constants as dirty
                // so I apply them during the next stage.
                cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                cmdEncoder->_depthStencilState.markDirty();
                cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                break;
			}
            case kMVKGraphicsStageTessControl: {
                mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                if (pipeline->needsTessCtlOutputBuffer()) {
                    tcOutBuff = cmdEncoder->getTempMTLBuffer(outControlPointCount * tessParams.patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerVertexOutputComponents);
                    [mtlTessCtlEncoder setBuffer: tcOutBuff->_mtlBuffer
                                          offset: tcOutBuff->_offset
                                         atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageTessCtl]];
                }
                if (pipeline->needsTessCtlPatchOutputBuffer()) {
                    tcPatchOutBuff = cmdEncoder->getTempMTLBuffer(tessParams.patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerPatchOutputComponents);
                    [mtlTessCtlEncoder setBuffer: tcPatchOutBuff->_mtlBuffer
                                          offset: tcPatchOutBuff->_offset
                                         atIndex: pipeline->getTessCtlPatchOutputBufferIndex()];
                }
                tcLevelBuff = cmdEncoder->getTempMTLBuffer(tessParams.patchCount * sizeof(MTLQuadTessellationFactorsHalf));
                [mtlTessCtlEncoder setBuffer: tcLevelBuff->_mtlBuffer
                                      offset: tcLevelBuff->_offset
                                     atIndex: pipeline->getTessCtlLevelBufferIndex()];
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &tessParams,
                                            sizeof(tessParams),
                                            pipeline->getIndirectParamsIndex().stages[kMVKShaderStageTessCtl]);
                if (pipeline->needsVertexOutputBuffer()) {
                    [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                          offset: vtxOutBuff->_offset
                                         atIndex: kMVKTessCtlInputBufferIndex];
                }
				// The vertex shader produced output in the correct order, so there's no need to use
				// an index buffer here.
				NSUInteger sgSize = pipeline->getTessControlStageState().threadExecutionWidth;
				NSUInteger wgSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
				while (wgSize > cmdEncoder->getDevice()->_pProperties->limits.maxComputeWorkGroupSize[0]) {
					sgSize >>= 1;
					wgSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
				}
				if (cmdEncoder->getDevice()->_pMetalFeatures->nonUniformThreadgroups) {
#if MVK_MACOS_OR_IOS
					[mtlTessCtlEncoder dispatchThreads: MTLSizeMake(tessParams.patchCount * outControlPointCount, 1, 1)
								 threadsPerThreadgroup: MTLSizeMake(wgSize, 1, 1)];
#endif
				} else {
					[mtlTessCtlEncoder dispatchThreadgroups: MTLSizeMake(mvkCeilingDivide(tessParams.patchCount * outControlPointCount, wgSize), 1, 1)
									  threadsPerThreadgroup: MTLSizeMake(wgSize, 1, 1)];
				}
                // Running this stage prematurely ended the render pass, so we have to start it up again.
                // TODO: On iOS, maybe we could use a tile shader to avoid this.
                cmdEncoder->beginMetalRenderPass(true);
                break;
			}
            case kMVKGraphicsStageRasterization:
                if (pipeline->isTessellationPipeline()) {
                    if (pipeline->needsTessCtlOutputBuffer()) {
                        [cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcOutBuff->_mtlBuffer
                                                                offset: tcOutBuff->_offset
                                                               atIndex: kMVKTessEvalInputBufferIndex];
                    }
                    if (pipeline->needsTessCtlPatchOutputBuffer()) {
                        [cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcPatchOutBuff->_mtlBuffer
                                                                offset: tcPatchOutBuff->_offset
                                                               atIndex: kMVKTessEvalPatchInputBufferIndex];
                    }
                    [cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcLevelBuff->_mtlBuffer
                                                            offset: tcLevelBuff->_offset
                                                           atIndex: kMVKTessEvalLevelBufferIndex];
                    [cmdEncoder->_mtlRenderEncoder setTessellationFactorBuffer: tcLevelBuff->_mtlBuffer
                                                                        offset: tcLevelBuff->_offset
                                                                instanceStride: 0];
                    // The tessellation control shader produced output in the correct order, so there's no need to use
                    // an index buffer here.
                    [cmdEncoder->_mtlRenderEncoder drawPatches: outControlPointCount
                                                    patchStart: 0
                                                    patchCount: tessParams.patchCount
                                              patchIndexBuffer: nil
                                        patchIndexBufferOffset: 0
                                                 instanceCount: 1
                                                  baseInstance: 0];
                    // Mark pipeline, resources, and tess control push constants as dirty
                    // so I apply them during the next stage.
                    cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                    cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                    cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                } else {
                    if (cmdEncoder->_pDeviceMetalFeatures->baseVertexInstanceDrawing) {
                        [cmdEncoder->_mtlRenderEncoder drawIndexedPrimitives: cmdEncoder->_mtlPrimitiveType
                                                                  indexCount: _indexCount
                                                                   indexType: (MTLIndexType)ibb.mtlIndexType
                                                                 indexBuffer: ibb.mtlBuffer
                                                           indexBufferOffset: idxBuffOffset
                                                               instanceCount: _instanceCount
                                                                  baseVertex: _vertexOffset
                                                                baseInstance: _firstInstance];
                    } else {
                        [cmdEncoder->_mtlRenderEncoder drawIndexedPrimitives: cmdEncoder->_mtlPrimitiveType
                                                                  indexCount: _indexCount
                                                                   indexType: (MTLIndexType)ibb.mtlIndexType
                                                                 indexBuffer: ibb.mtlBuffer
                                                           indexBufferOffset: idxBuffOffset
                                                               instanceCount: _instanceCount];
                    }
                }
                break;
        }
    }
}


#pragma mark -
#pragma mark MVKCmdDrawIndirect

VkResult MVKCmdDrawIndirect::setContent(MVKCommandBuffer* cmdBuff,
										VkBuffer buffer,
										VkDeviceSize offset,
										uint32_t drawCount,
										uint32_t stride) {
	MVKBuffer* mvkBuffer = (MVKBuffer*)buffer;
	_mtlIndirectBuffer = mvkBuffer->getMTLBuffer();
	_mtlIndirectBufferOffset = mvkBuffer->getMTLBufferOffset() + offset;
	_mtlIndirectBufferStride = stride;
	_drawCount = drawCount;

    // Validate
	MVKDevice* mvkDvc = cmdBuff->getDevice();
    if ( !mvkDvc->_pMetalFeatures->indirectDrawing ) {
        return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDrawIndirect(): The current device does not support indirect drawing.");
    }
	if (cmdBuff->_lastTessellationPipeline && !mvkDvc->_pMetalFeatures->indirectTessellationDrawing) {
		return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDrawIndirect(): The current device does not support indirect tessellated drawing.");
	}

	return VK_SUCCESS;
}

// This is totally arbitrary, but we're forced to do this because we don't know how many vertices
// there are at encoding time. And this will probably be inadequate for large instanced draws.
// TODO: Consider breaking up such draws using different base instance values. But this will
// require yet more munging of the indirect buffers...
static const uint32_t kMVKDrawIndirectVertexCountUpperBound = 131072;

void MVKCmdDrawIndirect::encode(MVKCommandEncoder* cmdEncoder) {

    auto* pipeline = (MVKGraphicsPipeline*)cmdEncoder->_graphicsPipelineState.getPipeline();
    // The indirect calls for dispatchThreadgroups:... and drawPatches:... have different formats.
    // We have to convert from the drawPrimitives:... format to them.
    // While we're at it, we can create the temporary output buffers once and reuse them
    // for each draw.
    const MVKMTLBufferAllocation* tcIndirectBuff = nullptr;
	const MVKMTLBufferAllocation* tcParamsBuff = nullptr;
    const MVKMTLBufferAllocation* vtxOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcPatchOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcLevelBuff = nullptr;
    uint32_t patchCount = 0, vertexCount = 0;
    uint32_t inControlPointCount = 0, outControlPointCount = 0;
	VkDeviceSize paramsIncr = 0;

    VkDeviceSize mtlTCIndBuffOfst = 0;
    VkDeviceSize mtlParmBuffOfst = 0;
    NSUInteger vtxThreadExecWidth = 0;
    NSUInteger tcWorkgroupSize = 0;

    if (pipeline->isTessellationPipeline()) {
        // We can't read the indirect buffer CPU-side, since it may change between
        // encoding and execution. So we don't know how big to make the buffers.
        // We must assume an arbitrarily large number of vertices may be submitted.
        // But not too many, or we'll exhaust available VRAM.
        inControlPointCount = pipeline->getInputControlPointCount();
        outControlPointCount = pipeline->getOutputControlPointCount();
        vertexCount = kMVKDrawIndirectVertexCountUpperBound;
        patchCount = mvkCeilingDivide(vertexCount, inControlPointCount);
        VkDeviceSize indirectSize = (2 * sizeof(MTLDispatchThreadgroupsIndirectArguments) + sizeof(MTLDrawPatchIndirectArguments)) * _drawCount;
        if (cmdEncoder->_pDeviceMetalFeatures->mslVersion >= 20100) {
            indirectSize += sizeof(MTLStageInRegionIndirectArguments) * _drawCount;
        }
		paramsIncr = std::max((size_t)cmdEncoder->getDevice()->_pProperties->limits.minUniformBufferOffsetAlignment, sizeof(uint32_t) * 2);
		VkDeviceSize paramsSize = paramsIncr * _drawCount;
        tcIndirectBuff = cmdEncoder->getTempMTLBuffer(indirectSize);
        mtlTCIndBuffOfst = tcIndirectBuff->_offset;
		tcParamsBuff = cmdEncoder->getTempMTLBuffer(paramsSize);
        mtlParmBuffOfst = tcParamsBuff->_offset;
        if (pipeline->needsVertexOutputBuffer()) {
            vtxOutBuff = cmdEncoder->getTempMTLBuffer(vertexCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxVertexOutputComponents);
        }
        if (pipeline->needsTessCtlOutputBuffer()) {
            tcOutBuff = cmdEncoder->getTempMTLBuffer(outControlPointCount * patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerVertexOutputComponents);
        }
        if (pipeline->needsTessCtlPatchOutputBuffer()) {
            tcPatchOutBuff = cmdEncoder->getTempMTLBuffer(patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerPatchOutputComponents);
        }
        tcLevelBuff = cmdEncoder->getTempMTLBuffer(patchCount * sizeof(MTLQuadTessellationFactorsHalf));

        vtxThreadExecWidth = pipeline->getTessVertexStageState().threadExecutionWidth;
        NSUInteger sgSize = pipeline->getTessControlStageState().threadExecutionWidth;
        tcWorkgroupSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
        while (tcWorkgroupSize > cmdEncoder->getDevice()->_pProperties->limits.maxComputeWorkGroupSize[0]) {
            sgSize >>= 1;
            tcWorkgroupSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
        }
    }

	MVKPiplineStages stages;
    pipeline->getStages(stages);

    VkDeviceSize mtlIndBuffOfst = _mtlIndirectBufferOffset;

    for (uint32_t drawIdx = 0; drawIdx < _drawCount; drawIdx++) {
        for (uint32_t s : stages) {
            auto stage = MVKGraphicsStage(s);
            id<MTLComputeCommandEncoder> mtlTessCtlEncoder = nil;
            if (drawIdx == 0 && stage == kMVKGraphicsStageVertex) {
                // We need the indirect buffers now. This must be done before finalizing
                // draw state, or the pipeline will get overridden. This is a good time
                // to do it, since it will require switching to compute anyway. Do it all
                // at once to get it over with.
				cmdEncoder->encodeStoreActions(true);
                mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                id<MTLComputePipelineState> mtlConvertState = cmdEncoder->getCommandEncodingPool()->getCmdDrawIndirectConvertBuffersMTLComputePipelineState(false);
                [mtlTessCtlEncoder setComputePipelineState: mtlConvertState];
                [mtlTessCtlEncoder setBuffer: _mtlIndirectBuffer
                                      offset: _mtlIndirectBufferOffset
                                     atIndex: 0];
                [mtlTessCtlEncoder setBuffer: tcIndirectBuff->_mtlBuffer
                                      offset: tcIndirectBuff->_offset
                                     atIndex: 1];
                [mtlTessCtlEncoder setBuffer: tcParamsBuff->_mtlBuffer
                                      offset: tcParamsBuff->_offset
                                     atIndex: 2];
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &_mtlIndirectBufferStride,
                                            sizeof(_mtlIndirectBufferStride),
                                            3);
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &inControlPointCount,
                                            sizeof(inControlPointCount),
                                            4);
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &outControlPointCount,
                                            sizeof(outControlPointCount),
                                            5);
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &_drawCount,
                                            sizeof(_drawCount),
                                            6);
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &vtxThreadExecWidth,
                                            sizeof(vtxThreadExecWidth),
                                            7);
                cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                            &tcWorkgroupSize,
                                            sizeof(tcWorkgroupSize),
                                            8);
				if (cmdEncoder->getDevice()->_pMetalFeatures->nonUniformThreadgroups) {
#if MVK_MACOS_OR_IOS
					[mtlTessCtlEncoder dispatchThreads: MTLSizeMake(_drawCount, 1, 1)
								 threadsPerThreadgroup: MTLSizeMake(mtlConvertState.threadExecutionWidth, 1, 1)];
#endif
				} else {
					[mtlTessCtlEncoder dispatchThreadgroups: MTLSizeMake(mvkCeilingDivide<NSUInteger>(_drawCount, mtlConvertState.threadExecutionWidth), 1, 1)
									  threadsPerThreadgroup: MTLSizeMake(mtlConvertState.threadExecutionWidth, 1, 1)];
				}
            }

            cmdEncoder->finalizeDrawState(stage);	// Ensure all updated state has been submitted to Metal

			if ( !pipeline->hasValidMTLPipelineStates() ) { return; }	// Abort if this pipeline stage could not be compiled.

            switch (stage) {
                case kMVKGraphicsStageVertex:
					cmdEncoder->encodeStoreActions(true);
                    mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                    if (pipeline->needsVertexOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                              offset: vtxOutBuff->_offset
                                             atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageVertex]];
                    }
					// We must assume we can read up to the maximum number of vertices.
					[mtlTessCtlEncoder setStageInRegion: MTLRegionMake2D(0, 0, vertexCount, vertexCount)];
					if ([mtlTessCtlEncoder respondsToSelector: @selector(setStageInRegionWithIndirectBuffer:indirectBufferOffset:)]) {
						[mtlTessCtlEncoder setStageInRegionWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
						                                 indirectBufferOffset: mtlTCIndBuffOfst];
						mtlTCIndBuffOfst += sizeof(MTLStageInRegionIndirectArguments);
					}
					[mtlTessCtlEncoder dispatchThreadgroupsWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
														 indirectBufferOffset: mtlTCIndBuffOfst
														threadsPerThreadgroup: MTLSizeMake(vtxThreadExecWidth, 1, 1)];
					mtlTCIndBuffOfst += sizeof(MTLDispatchThreadgroupsIndirectArguments);
                    // Mark pipeline, resources, and tess control push constants as dirty
                    // so I apply them during the next stage.
                    cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                    cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                    cmdEncoder->_depthStencilState.markDirty();
                    cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                    break;
                case kMVKGraphicsStageTessControl:
                    mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                    if (pipeline->needsTessCtlOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: tcOutBuff->_mtlBuffer
                                              offset: tcOutBuff->_offset
                                             atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageTessCtl]];
                    }
                    if (pipeline->needsTessCtlPatchOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: tcPatchOutBuff->_mtlBuffer
                                              offset: tcPatchOutBuff->_offset
                                             atIndex: pipeline->getTessCtlPatchOutputBufferIndex()];
                    }
                    [mtlTessCtlEncoder setBuffer: tcLevelBuff->_mtlBuffer
                                          offset: tcLevelBuff->_offset
                                         atIndex: pipeline->getTessCtlLevelBufferIndex()];
					[mtlTessCtlEncoder setBuffer: tcParamsBuff->_mtlBuffer
										  offset: mtlParmBuffOfst
										 atIndex: pipeline->getIndirectParamsIndex().stages[kMVKShaderStageTessCtl]];
					mtlParmBuffOfst += paramsIncr;
                    if (pipeline->needsVertexOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                              offset: vtxOutBuff->_offset
                                             atIndex: kMVKTessCtlInputBufferIndex];
                    }
                    [mtlTessCtlEncoder dispatchThreadgroupsWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
                                                         indirectBufferOffset: mtlTCIndBuffOfst
                                                        threadsPerThreadgroup: MTLSizeMake(tcWorkgroupSize, 1, 1)];
                    mtlTCIndBuffOfst += sizeof(MTLDispatchThreadgroupsIndirectArguments);
                    // Running this stage prematurely ended the render pass, so we have to start it up again.
                    // TODO: On iOS, maybe we could use a tile shader to avoid this.
                    cmdEncoder->beginMetalRenderPass(true);
                    break;
                case kMVKGraphicsStageRasterization:
                    if (pipeline->isTessellationPipeline()) {
						if (cmdEncoder->getDevice()->_pMetalFeatures->indirectTessellationDrawing) {
							if (pipeline->needsTessCtlOutputBuffer()) {
								[cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcOutBuff->_mtlBuffer
																		offset: tcOutBuff->_offset
																	   atIndex: kMVKTessEvalInputBufferIndex];
							}
							if (pipeline->needsTessCtlPatchOutputBuffer()) {
								[cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcPatchOutBuff->_mtlBuffer
																		offset: tcPatchOutBuff->_offset
																	   atIndex: kMVKTessEvalPatchInputBufferIndex];
							}
							[cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcLevelBuff->_mtlBuffer
																	offset: tcLevelBuff->_offset
																   atIndex: kMVKTessEvalLevelBufferIndex];
							[cmdEncoder->_mtlRenderEncoder setTessellationFactorBuffer: tcLevelBuff->_mtlBuffer
																				offset: tcLevelBuff->_offset
																		instanceStride: 0];
#if MVK_MACOS_OR_IOS
							[cmdEncoder->_mtlRenderEncoder drawPatches: outControlPointCount
													  patchIndexBuffer: nil
												patchIndexBufferOffset: 0
														indirectBuffer: tcIndirectBuff->_mtlBuffer
												  indirectBufferOffset: mtlTCIndBuffOfst];
#endif
						}

						mtlTCIndBuffOfst += sizeof(MTLDrawPatchIndirectArguments);
                        // Mark pipeline, resources, and tess control push constants as dirty
                        // so I apply them during the next stage.
                        cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                        cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                        cmdEncoder->getPushConstants(VK_SHADER_STAGE_VERTEX_BIT)->beginMetalRenderPass();
                    } else {
                        [cmdEncoder->_mtlRenderEncoder drawPrimitives: cmdEncoder->_mtlPrimitiveType
                                                       indirectBuffer: _mtlIndirectBuffer
                                                 indirectBufferOffset: mtlIndBuffOfst];
                            mtlIndBuffOfst += _mtlIndirectBufferStride;
                    }
                    break;
            }
        }
    }
}


#pragma mark -
#pragma mark MVKCmdDrawIndexedIndirect

VkResult MVKCmdDrawIndexedIndirect::setContent(MVKCommandBuffer* cmdBuff,
											   VkBuffer buffer,
											   VkDeviceSize offset,
											   uint32_t drawCount,
											   uint32_t stride) {
	MVKBuffer* mvkBuffer = (MVKBuffer*)buffer;
	_mtlIndirectBuffer = mvkBuffer->getMTLBuffer();
	_mtlIndirectBufferOffset = mvkBuffer->getMTLBufferOffset() + offset;
	_mtlIndirectBufferStride = stride;
	_drawCount = drawCount;

    // Validate
	MVKDevice* mvkDvc = cmdBuff->getDevice();
    if ( !mvkDvc->_pMetalFeatures->indirectDrawing ) {
        return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDrawIndexedIndirect(): The current device does not support indirect drawing.");
    }
	if (cmdBuff->_lastTessellationPipeline && !mvkDvc->_pMetalFeatures->indirectTessellationDrawing) {
		return cmdBuff->reportError(VK_ERROR_FEATURE_NOT_PRESENT, "vkCmdDrawIndexedIndirect(): The current device does not support indirect tessellated drawing.");
	}

	return VK_SUCCESS;
}

void MVKCmdDrawIndexedIndirect::encode(MVKCommandEncoder* cmdEncoder) {

    MVKIndexMTLBufferBinding& ibb = cmdEncoder->_graphicsResourcesState._mtlIndexBufferBinding;
    auto* pipeline = (MVKGraphicsPipeline*)cmdEncoder->_graphicsPipelineState.getPipeline();
    // The indirect calls for dispatchThreadgroups:... and drawPatches:... have different formats.
    // We have to convert from the drawIndexedPrimitives:... format to them.
    // While we're at it, we can create the temporary output buffers once and reuse them
    // for each draw.
    const MVKMTLBufferAllocation* tcIndirectBuff = nullptr;
    const MVKMTLBufferAllocation* tcParamsBuff = nullptr;
    const MVKMTLBufferAllocation* vtxOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcPatchOutBuff = nullptr;
    const MVKMTLBufferAllocation* tcLevelBuff = nullptr;
    const MVKMTLBufferAllocation* vtxIndexBuff = nullptr;
    uint32_t patchCount = 0, vertexCount = 0;
    uint32_t inControlPointCount = 0, outControlPointCount = 0;
	VkDeviceSize paramsIncr = 0;

    VkDeviceSize mtlTCIndBuffOfst = 0;
    VkDeviceSize mtlParmBuffOfst = 0;
    NSUInteger vtxThreadExecWidth = 0;
    NSUInteger tcWorkgroupSize = 0;

    if (pipeline->isTessellationPipeline()) {
        // We can't read the indirect buffer CPU-side, since it may change between
        // encoding and execution. So we don't know how big to make the buffers.
        // We must assume an arbitrarily large number of vertices may be submitted.
        // But not too many, or we'll exhaust available VRAM.
        inControlPointCount = pipeline->getInputControlPointCount();
        outControlPointCount = pipeline->getOutputControlPointCount();
        vertexCount = kMVKDrawIndirectVertexCountUpperBound;
        patchCount = mvkCeilingDivide(vertexCount, inControlPointCount);
        VkDeviceSize indirectSize = (sizeof(MTLDispatchThreadgroupsIndirectArguments) + sizeof(MTLDrawPatchIndirectArguments)) * _drawCount;
        if (cmdEncoder->_pDeviceMetalFeatures->mslVersion >= 20100) {
            indirectSize += sizeof(MTLStageInRegionIndirectArguments) * _drawCount;
        }
		paramsIncr = std::max((size_t)cmdEncoder->getDevice()->_pProperties->limits.minUniformBufferOffsetAlignment, sizeof(uint32_t) * 2);
		VkDeviceSize paramsSize = paramsIncr * _drawCount;
        tcIndirectBuff = cmdEncoder->getTempMTLBuffer(indirectSize);
        mtlTCIndBuffOfst = tcIndirectBuff->_offset;
		tcParamsBuff = cmdEncoder->getTempMTLBuffer(paramsSize);
        mtlParmBuffOfst = tcParamsBuff->_offset;
        if (pipeline->needsVertexOutputBuffer()) {
            vtxOutBuff = cmdEncoder->getTempMTLBuffer(vertexCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxVertexOutputComponents);
        }
        if (pipeline->needsTessCtlOutputBuffer()) {
            tcOutBuff = cmdEncoder->getTempMTLBuffer(outControlPointCount * patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerVertexOutputComponents);
        }
        if (pipeline->needsTessCtlPatchOutputBuffer()) {
            tcPatchOutBuff = cmdEncoder->getTempMTLBuffer(patchCount * 4 * cmdEncoder->_pDeviceProperties->limits.maxTessellationControlPerPatchOutputComponents);
        }
        tcLevelBuff = cmdEncoder->getTempMTLBuffer(patchCount * sizeof(MTLQuadTessellationFactorsHalf));
        vtxIndexBuff = cmdEncoder->getTempMTLBuffer(ibb.mtlBuffer.length);

        id<MTLComputePipelineState> vtxState;
        vtxState = ibb.mtlIndexType == MTLIndexTypeUInt16 ? pipeline->getTessVertexStageIndex16State() : pipeline->getTessVertexStageIndex32State();
        vtxThreadExecWidth = vtxState.threadExecutionWidth;

        NSUInteger sgSize = pipeline->getTessControlStageState().threadExecutionWidth;
        tcWorkgroupSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
        while (tcWorkgroupSize > cmdEncoder->getDevice()->_pProperties->limits.maxComputeWorkGroupSize[0]) {
            sgSize >>= 1;
            tcWorkgroupSize = mvkLeastCommonMultiple(outControlPointCount, sgSize);
        }
    }

	MVKPiplineStages stages;
    pipeline->getStages(stages);

    VkDeviceSize mtlIndBuffOfst = _mtlIndirectBufferOffset;
    
    for (uint32_t drawIdx = 0; drawIdx < _drawCount; drawIdx++) {
        for (uint32_t s : stages) {
            auto stage = MVKGraphicsStage(s);
            id<MTLComputeCommandEncoder> mtlTessCtlEncoder = nil;
            if (stage == kMVKGraphicsStageVertex) {
				cmdEncoder->encodeStoreActions(true);
                mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                // We need the indirect buffers now. This must be done before finalizing
                // draw state, or the pipeline will get overridden. This is a good time
                // to do it, since it will require switching to compute anyway. Do it all
                // at once to get it over with.
                if (drawIdx == 0) {
                    id<MTLComputePipelineState> mtlConvertState = cmdEncoder->getCommandEncodingPool()->getCmdDrawIndirectConvertBuffersMTLComputePipelineState(true);
                    [mtlTessCtlEncoder setComputePipelineState: mtlConvertState];
                    [mtlTessCtlEncoder setBuffer: _mtlIndirectBuffer
                                          offset: _mtlIndirectBufferOffset
                                         atIndex: 0];
                    [mtlTessCtlEncoder setBuffer: tcIndirectBuff->_mtlBuffer
                                          offset: tcIndirectBuff->_offset
                                         atIndex: 1];
                    [mtlTessCtlEncoder setBuffer: tcParamsBuff->_mtlBuffer
                                          offset: tcParamsBuff->_offset
                                         atIndex: 2];
                    cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                                &_mtlIndirectBufferStride,
                                                sizeof(_mtlIndirectBufferStride),
                                                3);
                    cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                                &inControlPointCount,
                                                sizeof(inControlPointCount),
                                                4);
                    cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                                &outControlPointCount,
                                                sizeof(inControlPointCount),
                                                5);
                    cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
                                                &_drawCount,
                                                sizeof(_drawCount),
                                                6);
					cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
												&vtxThreadExecWidth,
												sizeof(vtxThreadExecWidth),
												7);
					cmdEncoder->setComputeBytes(mtlTessCtlEncoder,
												&tcWorkgroupSize,
												sizeof(tcWorkgroupSize),
												8);
                    [mtlTessCtlEncoder dispatchThreadgroups: MTLSizeMake(mvkCeilingDivide<NSUInteger>(_drawCount, mtlConvertState.threadExecutionWidth), 1, 1)
                                      threadsPerThreadgroup: MTLSizeMake(mtlConvertState.threadExecutionWidth, 1, 1)];
                }
                // We actually need to make a copy of the index buffer, because there's no way to tell Metal to
                // offset an index buffer from a value in an indirect buffer. This also
                // means that, to make a copy, we have to use a compute shader.
                id<MTLComputePipelineState> mtlCopyIndexState = cmdEncoder->getCommandEncodingPool()->getCmdDrawIndexedCopyIndexBufferMTLComputePipelineState((MTLIndexType)ibb.mtlIndexType);
                [mtlTessCtlEncoder setComputePipelineState: mtlCopyIndexState];
                [mtlTessCtlEncoder setBuffer: ibb.mtlBuffer
                                      offset: ibb.offset
                                     atIndex: 0];
                [mtlTessCtlEncoder setBuffer: vtxIndexBuff->_mtlBuffer
                                      offset: vtxIndexBuff->_offset
                                     atIndex: 1];
                [mtlTessCtlEncoder setBuffer: _mtlIndirectBuffer
                                      offset: mtlIndBuffOfst
                                     atIndex: 2];
                [mtlTessCtlEncoder dispatchThreadgroupsWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
													 indirectBufferOffset: mtlTCIndBuffOfst
                                                    threadsPerThreadgroup: MTLSizeMake(vtxThreadExecWidth, 1, 1)];
				mtlIndBuffOfst += sizeof(MTLDrawIndexedPrimitivesIndirectArguments);
            }

	        cmdEncoder->finalizeDrawState(stage);	// Ensure all updated state has been submitted to Metal

			if ( !pipeline->hasValidMTLPipelineStates() ) { return; }	// Abort if this pipeline stage could not be compiled.

            switch (stage) {
                case kMVKGraphicsStageVertex:
					cmdEncoder->encodeStoreActions(true);
                    mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                    if (pipeline->needsVertexOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                             offset: vtxOutBuff->_offset
                                            atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageVertex]];
                    }
					[mtlTessCtlEncoder setBuffer: vtxIndexBuff->_mtlBuffer
										  offset: vtxIndexBuff->_offset
										 atIndex: pipeline->getIndirectParamsIndex().stages[kMVKShaderStageVertex]];
					[mtlTessCtlEncoder setStageInRegion: MTLRegionMake2D(0, 0, vertexCount, vertexCount)];
					if ([mtlTessCtlEncoder respondsToSelector: @selector(setStageInRegionWithIndirectBuffer:indirectBufferOffset:)]) {
						[mtlTessCtlEncoder setStageInRegionWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
						                                 indirectBufferOffset: mtlTCIndBuffOfst];
						mtlTCIndBuffOfst += sizeof(MTLStageInRegionIndirectArguments);
					}
					[mtlTessCtlEncoder dispatchThreadgroupsWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
														 indirectBufferOffset: mtlTCIndBuffOfst
														threadsPerThreadgroup: MTLSizeMake(vtxThreadExecWidth, 1, 1)];
					mtlTCIndBuffOfst += sizeof(MTLDispatchThreadgroupsIndirectArguments);
                    // Mark pipeline, resources, and tess control push constants as dirty
                    // so I apply them during the next stage.
                    cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                    cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                    cmdEncoder->_depthStencilState.markDirty();
                    cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                    break;
                case kMVKGraphicsStageTessControl:
                    mtlTessCtlEncoder = cmdEncoder->getMTLComputeEncoder(kMVKCommandUseTessellationVertexTessCtl);
                    if (pipeline->needsTessCtlOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: tcOutBuff->_mtlBuffer
                                              offset: tcOutBuff->_offset
                                             atIndex: pipeline->getOutputBufferIndex().stages[kMVKShaderStageTessCtl]];
                    }
                    if (pipeline->needsTessCtlPatchOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: tcPatchOutBuff->_mtlBuffer
                                              offset: tcPatchOutBuff->_offset
                                             atIndex: pipeline->getTessCtlPatchOutputBufferIndex()];
                    }
                    [mtlTessCtlEncoder setBuffer: tcLevelBuff->_mtlBuffer
                                          offset: tcLevelBuff->_offset
                                         atIndex: pipeline->getTessCtlLevelBufferIndex()];
					[mtlTessCtlEncoder setBuffer: tcParamsBuff->_mtlBuffer
										  offset: mtlParmBuffOfst
										 atIndex: pipeline->getIndirectParamsIndex().stages[kMVKShaderStageTessCtl]];
					mtlParmBuffOfst += paramsIncr;
                    if (pipeline->needsVertexOutputBuffer()) {
                        [mtlTessCtlEncoder setBuffer: vtxOutBuff->_mtlBuffer
                                              offset: vtxOutBuff->_offset
                                             atIndex: kMVKTessCtlInputBufferIndex];
                    }
                    [mtlTessCtlEncoder dispatchThreadgroupsWithIndirectBuffer: tcIndirectBuff->_mtlBuffer
                                                         indirectBufferOffset: mtlTCIndBuffOfst
                                                        threadsPerThreadgroup: MTLSizeMake(tcWorkgroupSize, 1, 1)];
                    mtlTCIndBuffOfst += sizeof(MTLDispatchThreadgroupsIndirectArguments);
                    // Running this stage prematurely ended the render pass, so we have to start it up again.
                    // TODO: On iOS, maybe we could use a tile shader to avoid this.
                    cmdEncoder->beginMetalRenderPass(true);
                    break;
                case kMVKGraphicsStageRasterization:
                    if (pipeline->isTessellationPipeline()) {
						if (cmdEncoder->getDevice()->_pMetalFeatures->indirectTessellationDrawing) {
							if (pipeline->needsTessCtlOutputBuffer()) {
								[cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcOutBuff->_mtlBuffer
																		offset: tcOutBuff->_offset
																	   atIndex: kMVKTessEvalInputBufferIndex];
							}
							if (pipeline->needsTessCtlPatchOutputBuffer()) {
								[cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcPatchOutBuff->_mtlBuffer
																		offset: tcPatchOutBuff->_offset
																	   atIndex: kMVKTessEvalPatchInputBufferIndex];
							}
							[cmdEncoder->_mtlRenderEncoder setVertexBuffer: tcLevelBuff->_mtlBuffer
																	offset: tcLevelBuff->_offset
																   atIndex: kMVKTessEvalLevelBufferIndex];
							[cmdEncoder->_mtlRenderEncoder setTessellationFactorBuffer: tcLevelBuff->_mtlBuffer
																				offset: tcLevelBuff->_offset
																		instanceStride: 0];
#if MVK_MACOS_OR_IOS
							[cmdEncoder->_mtlRenderEncoder drawPatches: outControlPointCount
													  patchIndexBuffer: nil
												patchIndexBufferOffset: 0
														indirectBuffer: tcIndirectBuff->_mtlBuffer
												  indirectBufferOffset: mtlTCIndBuffOfst];
#endif
						}

						mtlTCIndBuffOfst += sizeof(MTLDrawPatchIndirectArguments);
                        // Mark pipeline, resources, and tess control push constants as dirty
                        // so I apply them during the next stage.
                        cmdEncoder->_graphicsPipelineState.beginMetalRenderPass();
                        cmdEncoder->_graphicsResourcesState.beginMetalRenderPass();
                        cmdEncoder->getPushConstants(VK_SHADER_STAGE_TESSELLATION_CONTROL_BIT)->beginMetalRenderPass();
                    } else {
                        [cmdEncoder->_mtlRenderEncoder drawIndexedPrimitives: cmdEncoder->_mtlPrimitiveType
                                                                   indexType: (MTLIndexType)ibb.mtlIndexType
                                                                 indexBuffer: ibb.mtlBuffer
                                                           indexBufferOffset: ibb.offset
                                                              indirectBuffer: _mtlIndirectBuffer
                                                        indirectBufferOffset: mtlIndBuffOfst];
                        mtlIndBuffOfst += _mtlIndirectBufferStride;
                    }
                    break;
            }
        }
    }
}