| /* |
| BMP File Reader/Writer Implementation |
| Anton Gerdelan |
| Version: 3 |
| Licence: see apg_bmp.h |
| C99 |
| */ |
| |
| #ifdef _MSC_VER |
| #define _CRT_SECURE_NO_WARNINGS 1 |
| #endif |
| |
| #include "apg_bmp.h" |
| #include <assert.h> |
| #include <stdbool.h> |
| #include <stdint.h> |
| #include <stdio.h> |
| #include <stdlib.h> |
| #include <string.h> |
| |
| /* Maximum pixel dimensions of width or height of an image. Should accommodate max used in graphics APIs. |
| NOTE: 65536*65536 is the biggest number storable in 32 bits. |
| This needs to be multiplied by n_channels so actual memory indices are not uint32 but size_t to avoid overflow. |
| Note this will crash stb_image_write et al at maximum size which use 32bits, so reduce max size to accom. */ |
| #define _BMP_MAX_DIMS 65536 |
| #define _BMP_FILE_HDR_SZ 14 |
| #define _BMP_MIN_DIB_HDR_SZ 40 |
| #define _BMP_MIN_HDR_SZ ( _BMP_FILE_HDR_SZ + _BMP_MIN_DIB_HDR_SZ ) |
| #define _BMP_MAX_IMAGE_FILE_SIZE (1024ULL*1024ULL*1024ULL) |
| |
| #pragma pack( push, 1 ) // supported on GCC in addition to individual packing attribs |
| /* All BMP files, regardless of type, start with this file header */ |
| typedef struct _bmp_file_header_t { |
| char file_type[2]; |
| uint32_t file_sz; |
| uint16_t reserved1; |
| uint16_t reserved2; |
| uint32_t image_data_offset; |
| } _bmp_file_header_t; |
| |
| /* Following the file header is the BMP type header. this is the most commonly used format */ |
| typedef struct _bmp_dib_BITMAPINFOHEADER_t { |
| uint32_t this_header_sz; |
| int32_t w; // in older headers w & h these are shorts and may be unsigned |
| int32_t h; // |
| uint16_t n_planes; // must be 1 |
| uint16_t bpp; // bits per pixel. 1,4,8,16,24,32. |
| uint32_t compression_method; // 16 and 32-bit images must have a value of 3 here |
| uint32_t image_uncompressed_sz; // not consistently used in the wild, so ignored here. |
| int32_t horiz_pixels_per_meter; // not used. |
| int32_t vert_pixels_per_meter; // not used. |
| uint32_t n_colours_in_palette; // |
| uint32_t n_important_colours; // not used. |
| /* NOTE(Anton) a DIB header may end here at 40-bytes. be careful using sizeof() */ |
| /* if 'compression' value, above, is set to 3 ie the image is 16 or 32-bit, then these colour channel masks follow the headers. |
| these are big-endian order bit masks to assign bits of each pixel to different colours. bits used must be contiguous and not overlap. */ |
| uint32_t bitmask_r; |
| uint32_t bitmask_g; |
| uint32_t bitmask_b; |
| } _bmp_dib_BITMAPINFOHEADER_t; |
| #pragma pack( pop ) |
| |
| typedef enum _bmp_compression_t { |
| BI_RGB = 0, |
| BI_RLE8 = 1, |
| BI_RLE4 = 2, |
| BI_BITFIELDS = 3, |
| BI_JPEG = 4, |
| BI_PNG = 5, |
| BI_ALPHABITFIELDS = 6, |
| BI_CMYK = 11, |
| BI_CMYKRLE8 = 12, |
| BI_CMYRLE4 = 13 |
| } _bmp_compression_t; |
| |
| /* convenience struct and file->memory function */ |
| typedef struct _entire_file_t { |
| void* data; |
| size_t sz; |
| } _entire_file_t; |
| |
| /* |
| RETURNS |
| - true on success. record->data is allocated memory and must be freed by the caller. |
| - false on any error. Any allocated memory is freed if false is returned */ |
| static bool _read_entire_file( const char* filename, _entire_file_t* record ) { |
| FILE* fp = fopen( filename, "rb" ); |
| if ( !fp ) { return false; } |
| fseek( fp, 0L, SEEK_END ); |
| record->sz = (size_t)ftell( fp ); |
| |
| // Immediately bail on anything larger than _BMP_MAX_IMAGE_FILE_SIZE. |
| if (record->sz > _BMP_MAX_IMAGE_FILE_SIZE) { |
| fclose( fp ); |
| return false; |
| } |
| |
| record->data = malloc( record->sz ); |
| if ( !record->data ) { |
| fclose( fp ); |
| return false; |
| } |
| rewind( fp ); |
| size_t nr = fread( record->data, record->sz, 1, fp ); |
| fclose( fp ); |
| if ( 1 != nr ) { return false; } |
| return true; |
| } |
| |
| static bool _validate_file_hdr( _bmp_file_header_t* file_hdr_ptr, size_t file_sz ) { |
| if ( !file_hdr_ptr ) { return false; } |
| if ( file_hdr_ptr->file_type[0] != 'B' || file_hdr_ptr->file_type[1] != 'M' ) { return false; } |
| if ( file_hdr_ptr->image_data_offset > file_sz ) { return false; } |
| return true; |
| } |
| |
| static bool _validate_dib_hdr( _bmp_dib_BITMAPINFOHEADER_t* dib_hdr_ptr, size_t file_sz ) { |
| if ( !dib_hdr_ptr ) { return false; } |
| if ( _BMP_FILE_HDR_SZ + dib_hdr_ptr->this_header_sz > file_sz ) { return false; } |
| if ( ( 32 == dib_hdr_ptr->bpp || 16 == dib_hdr_ptr->bpp ) && ( BI_BITFIELDS != dib_hdr_ptr->compression_method && BI_ALPHABITFIELDS != dib_hdr_ptr->compression_method ) ) { |
| return false; |
| } |
| if ( BI_RGB != dib_hdr_ptr->compression_method && BI_BITFIELDS != dib_hdr_ptr->compression_method && BI_ALPHABITFIELDS != dib_hdr_ptr->compression_method ) { |
| return false; |
| } |
| // NOTE(Anton) using abs() in the if-statement was blowing up on large negative numbers. switched to labs() |
| if ( 0 == dib_hdr_ptr->w || 0 == dib_hdr_ptr->h || labs( dib_hdr_ptr->w ) > _BMP_MAX_DIMS || labs( dib_hdr_ptr->h ) > _BMP_MAX_DIMS ) { return false; } |
| |
| /* NOTE(Anton) if images reliably used n_colours_in_palette we could have done a palette/file size integrity check here. |
| because some always set 0 then we have to check every palette indexing as we read them */ |
| return true; |
| } |
| |
| /* NOTE(Anton) this could have ifdef branches on different compilers for the intrinsics versions for perf */ |
| static uint32_t _bitscan( uint32_t dword ) { |
| for ( uint32_t i = 0; i < 32; i++ ) { |
| if ( 1 & dword ) { return i; } |
| dword = dword >> 1; |
| } |
| return (uint32_t)-1; |
| } |
| |
| unsigned char* apg_bmp_read( const char* filename, int* w, int* h, unsigned int* n_chans ) { |
| if ( !filename || !w || !h || !n_chans ) { return NULL; } |
| |
| // read in the whole file into memory first - much faster than parsing on-the-fly |
| _entire_file_t record; |
| if ( !_read_entire_file( filename, &record ) ) { return NULL; } |
| if ( record.sz < _BMP_MIN_HDR_SZ ) { |
| free( record.data ); |
| return NULL; |
| } |
| |
| // grab and validate the first, file, header |
| _bmp_file_header_t* file_hdr_ptr = (_bmp_file_header_t*)record.data; |
| if ( !_validate_file_hdr( file_hdr_ptr, record.sz ) ) { |
| free( record.data ); |
| return NULL; |
| } |
| |
| // grad and validate the second, DIB, header |
| _bmp_dib_BITMAPINFOHEADER_t* dib_hdr_ptr = (_bmp_dib_BITMAPINFOHEADER_t*)( (uint8_t*)record.data + _BMP_FILE_HDR_SZ ); |
| if ( !_validate_dib_hdr( dib_hdr_ptr, record.sz ) ) { |
| free( record.data ); |
| return NULL; |
| } |
| |
| // bitmaps can have negative dims to indicate the image should be flipped |
| uint32_t width = *w = abs( dib_hdr_ptr->w ); |
| uint32_t height = *h = abs( dib_hdr_ptr->h ); |
| |
| // TODO(Anton) flip image memory at the end if this is true. because doing it per row was making me write bugs. |
| // bool vertically_flip = dib_hdr_ptr->h > 0 ? false : true; |
| |
| // channel count and palette are not well defined in the header so we make a good guess here |
| uint32_t n_dst_chans = 3, n_src_chans = 3; |
| bool has_palette = false; |
| switch ( dib_hdr_ptr->bpp ) { |
| case 32: n_dst_chans = n_src_chans = 4; break; // technically can be RGB but not supported |
| case 24: n_dst_chans = n_src_chans = 3; break; // technically can be RGBA but not supported |
| case 8: // seems to always use a BGR0 palette, even for greyscale |
| n_dst_chans = 3; |
| has_palette = true; |
| n_src_chans = 1; |
| break; |
| case 4: // always has a palette - needed for a MS-saved BMP |
| n_dst_chans = 3; |
| has_palette = true; |
| n_src_chans = 1; |
| break; |
| case 1: // 1-bpp means the palette has 3 colour channels with 2 colours i.e. monochrome but not always black & white |
| n_dst_chans = 3; |
| has_palette = true; |
| n_src_chans = 1; |
| break; |
| default: // this includes 2bpp and 16bpp |
| free( record.data ); |
| return NULL; |
| } // endswitch |
| *n_chans = n_dst_chans; |
| // NOTE(Anton) some image formats are not allowed a palette - could check for a bad header spec here also |
| if ( dib_hdr_ptr->n_colours_in_palette > 0 ) { has_palette = true; } |
| |
| #ifdef APG_BMP_DEBUG_OUTPUT |
| printf( "apg_bmp_debug: reading image\n|-filename `%s`\n|-dims %ux%u pixels\n|-bpp %u\n|-n_src_chans %u\n|-n_dst_chans %u\n", filename, *w, *h, |
| dib_hdr_ptr->bpp, n_src_chans, n_dst_chans ); |
| #endif |
| |
| uint32_t palette_offset = _BMP_FILE_HDR_SZ + dib_hdr_ptr->this_header_sz; |
| bool has_bitmasks = false; |
| if ( BI_BITFIELDS == dib_hdr_ptr->compression_method || BI_ALPHABITFIELDS == dib_hdr_ptr->compression_method ) { |
| has_bitmasks = true; |
| palette_offset += 12; |
| } |
| if ( palette_offset > record.sz ) { |
| free( record.data ); |
| return NULL; |
| } |
| |
| // work out if any padding how much to skip at end of each row |
| uint32_t unpadded_row_sz = width * n_src_chans; |
| // bit-encoded palette indices have different padding properties |
| if ( 4 == dib_hdr_ptr->bpp ) { |
| unpadded_row_sz = width % 2 > 0 ? width / 2 + 1 : width / 2; // find how many whole bytes required for this bit width |
| } |
| if ( 1 == dib_hdr_ptr->bpp ) { |
| unpadded_row_sz = width % 8 > 0 ? width / 8 + 1 : width / 8; // find how many whole bytes required for this bit width |
| } |
| uint32_t row_padding_sz = 0 == unpadded_row_sz % 4 ? 0 : 4 - ( unpadded_row_sz % 4 ); // NOTE(Anton) didn't expect operator precedence of - over % |
| |
| // another file size integrity check: partially validate source image data size |
| // 'image_data_offset' is by row padded to 4 bytes and is either colour data or palette indices. |
| if ( file_hdr_ptr->image_data_offset + ( unpadded_row_sz + row_padding_sz ) * height > record.sz ) { |
| free( record.data ); |
| return NULL; |
| } |
| |
| // find which bit number each colour channel starts at, so we can separate colours out |
| uint32_t bitshift_rgba[4] = {0, 0, 0, 0}; // NOTE(Anton) noticed this was int and not uint32_t so changed it. 17 Mar 2020 |
| uint32_t bitmask_a = 0; |
| if ( has_bitmasks ) { |
| bitmask_a = ~( dib_hdr_ptr->bitmask_r | dib_hdr_ptr->bitmask_g | dib_hdr_ptr->bitmask_b ); |
| bitshift_rgba[0] = _bitscan( dib_hdr_ptr->bitmask_r ); |
| bitshift_rgba[1] = _bitscan( dib_hdr_ptr->bitmask_g ); |
| bitshift_rgba[2] = _bitscan( dib_hdr_ptr->bitmask_b ); |
| bitshift_rgba[3] = _bitscan( bitmask_a ); |
| } |
| |
| // allocate memory for the output pixels block. cast to size_t in case width and height are both the max of 65536 and n_dst_chans > 1 |
| unsigned char* dst_img_ptr = malloc( (size_t)width * (size_t)height * (size_t)n_dst_chans ); |
| if ( !dst_img_ptr ) { |
| free( record.data ); |
| return NULL; |
| } |
| |
| uint8_t* palette_data_ptr = (uint8_t*)record.data + palette_offset; |
| uint8_t* src_img_ptr = (uint8_t*)record.data + file_hdr_ptr->image_data_offset; |
| size_t dst_stride_sz = width * n_dst_chans; |
| |
| // == 32-bpp -> 32-bit RGBA. == 32-bit and 16-bit require bitmasks |
| if ( 32 == dib_hdr_ptr->bpp ) { |
| // check source image has enough data in it to read from |
| if ( (size_t)file_hdr_ptr->image_data_offset + (size_t)height * (size_t)width * (size_t)n_src_chans > record.sz ) { |
| free( record.data ); |
| free( dst_img_ptr ); |
| return NULL; |
| } |
| size_t src_byte_idx = 0; |
| for ( uint32_t r = 0; r < height; r++ ) { |
| size_t dst_pixels_idx = r * dst_stride_sz; |
| for ( uint32_t c = 0; c < width; c++ ) { |
| uint32_t pixel; |
| memcpy( &pixel, &src_img_ptr[src_byte_idx], 4 ); |
| // NOTE(Anton) the below assumes 32-bits is always RGBA 1 byte per channel. 10,10,10 RGB exists though and isn't handled. |
| dst_img_ptr[dst_pixels_idx++] = ( uint8_t )( ( pixel & dib_hdr_ptr->bitmask_r ) >> bitshift_rgba[0] ); |
| dst_img_ptr[dst_pixels_idx++] = ( uint8_t )( ( pixel & dib_hdr_ptr->bitmask_g ) >> bitshift_rgba[1] ); |
| dst_img_ptr[dst_pixels_idx++] = ( uint8_t )( ( pixel & dib_hdr_ptr->bitmask_b ) >> bitshift_rgba[2] ); |
| dst_img_ptr[dst_pixels_idx++] = ( uint8_t )( ( pixel & bitmask_a ) >> bitshift_rgba[3] ); |
| src_byte_idx += 4; |
| } |
| src_byte_idx += row_padding_sz; |
| } |
| |
| // == 8-bpp -> 24-bit RGB == |
| } else if ( 8 == dib_hdr_ptr->bpp && has_palette ) { |
| // validate indices (body of image data) fits in file |
| if ( file_hdr_ptr->image_data_offset + height * width > record.sz ) { |
| free( record.data ); |
| free( dst_img_ptr ); |
| return NULL; |
| } |
| size_t src_byte_idx = 0; |
| for ( uint32_t r = 0; r < height; r++ ) { |
| size_t dst_pixels_idx = ( height - 1 - r ) * dst_stride_sz; |
| for ( uint32_t c = 0; c < width; c++ ) { |
| // "most palettes are 4 bytes in RGB0 order but 3 for..." - it was actually BRG0 in old images -- Anton |
| uint8_t index = src_img_ptr[src_byte_idx]; // 8-bit index value per pixel |
| |
| if ( palette_offset + index * 4 + 2 >= record.sz ) { |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[index * 4 + 2]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[index * 4 + 1]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[index * 4 + 0]; |
| src_byte_idx++; |
| } |
| src_byte_idx += row_padding_sz; |
| } |
| |
| // == 4-bpp (16-colour) -> 24-bit RGB == |
| } else if ( 4 == dib_hdr_ptr->bpp && has_palette ) { |
| size_t src_byte_idx = 0; |
| for ( uint32_t r = 0; r < height; r++ ) { |
| size_t dst_pixels_idx = ( height - 1 - r ) * dst_stride_sz; |
| for ( uint32_t c = 0; c < width; c++ ) { |
| if ( file_hdr_ptr->image_data_offset + src_byte_idx > record.sz ) { |
| free( record.data ); |
| free( dst_img_ptr ); |
| return NULL; |
| } |
| // handle 2 pixels at a time |
| uint8_t pixel_duo = src_img_ptr[src_byte_idx]; |
| uint8_t a_index = ( 0xFF & pixel_duo ) >> 4; |
| uint8_t b_index = 0xF & pixel_duo; |
| |
| if ( palette_offset + a_index * 4 + 2 >= record.sz ) { // invalid src image |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| if ( dst_pixels_idx + 3 > width * height * n_dst_chans ) { // done |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[a_index * 4 + 2]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[a_index * 4 + 1]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[a_index * 4 + 0]; |
| if ( ++c >= width ) { // advance a column |
| c = 0; |
| r++; |
| if ( r >= height ) { // done. no need to get second pixel. eg a 1x1 pixel image. |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| dst_pixels_idx = ( height - 1 - r ) * dst_stride_sz; |
| } |
| |
| if ( palette_offset + b_index * 4 + 2 >= record.sz ) { // invalid src image |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| if ( dst_pixels_idx + 3 > width * height * n_dst_chans ) { // done. probably redundant check since checking r >= height. |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[b_index * 4 + 2]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[b_index * 4 + 1]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[b_index * 4 + 0]; |
| src_byte_idx++; |
| } |
| src_byte_idx += row_padding_sz; |
| } |
| |
| // == 1-bpp -> 24-bit RGB == |
| } else if ( 1 == dib_hdr_ptr->bpp && has_palette ) { |
| /* encoding method for monochrome is not well documented. |
| a 2x2 pixel image is stored as 4 1-bit palette indexes |
| the palette is stored as any 2 RGB0 colours (not necessarily B&W) |
| so for an image with indexes like so: |
| 1 1 |
| 0 1 |
| it is bit-encoded as follows, starting at MSB: |
| 01000000 00000000 00000000 00000000 (first byte val 64) |
| 11000000 00000000 00000000 00000000 (first byte val 192) |
| data is still split by row and each row padded to 4 byte multiples |
| */ |
| size_t src_byte_idx = 0; |
| for ( uint32_t r = 0; r < height; r++ ) { |
| uint8_t bit_idx = 0; // used in monochrome |
| size_t dst_pixels_idx = ( height - 1 - r ) * dst_stride_sz; |
| for ( uint32_t c = 0; c < width; c++ ) { |
| if ( 8 == bit_idx ) { // start reading from the next byte |
| src_byte_idx++; |
| bit_idx = 0; |
| } |
| if ( file_hdr_ptr->image_data_offset + src_byte_idx > record.sz ) { |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| uint8_t pixel_oct = src_img_ptr[src_byte_idx]; |
| uint8_t bit = 128 >> bit_idx; |
| uint8_t masked = pixel_oct & bit; |
| uint8_t palette_idx = masked > 0 ? 1 : 0; |
| |
| if ( palette_offset + palette_idx * 4 + 2 >= record.sz ) { |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[palette_idx * 4 + 2]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[palette_idx * 4 + 1]; |
| dst_img_ptr[dst_pixels_idx++] = palette_data_ptr[palette_idx * 4 + 0]; |
| bit_idx++; |
| } |
| src_byte_idx += ( row_padding_sz + 1 ); // 1bpp is special here |
| } |
| |
| // == 24-bpp -> 24-bit RGB == (but also should handle some other n_chans cases) |
| } else { |
| // NOTE(Anton) this only supports 1 byte per channel |
| if ( file_hdr_ptr->image_data_offset + height * width * n_dst_chans > record.sz ) { |
| free( record.data ); |
| free( dst_img_ptr ); |
| return NULL; |
| } |
| size_t src_byte_idx = 0; |
| for ( uint32_t r = 0; r < height; r++ ) { |
| size_t dst_pixels_idx = ( height - 1 - r ) * dst_stride_sz; |
| for ( uint32_t c = 0; c < width; c++ ) { |
| // re-orders from BGR to RGB |
| if ( n_dst_chans > 3 ) { dst_img_ptr[dst_pixels_idx++] = src_img_ptr[src_byte_idx + 3]; } |
| if ( n_dst_chans > 2 ) { dst_img_ptr[dst_pixels_idx++] = src_img_ptr[src_byte_idx + 2]; } |
| if ( n_dst_chans > 1 ) { dst_img_ptr[dst_pixels_idx++] = src_img_ptr[src_byte_idx + 1]; } |
| dst_img_ptr[dst_pixels_idx++] = src_img_ptr[src_byte_idx]; |
| src_byte_idx += n_src_chans; |
| } |
| src_byte_idx += row_padding_sz; |
| } |
| } // endif bpp |
| |
| free( record.data ); |
| return dst_img_ptr; |
| } |
| |
| void apg_bmp_free( unsigned char* pixels_ptr ) { |
| if ( !pixels_ptr ) { return; } |
| free( pixels_ptr ); |
| } |
| |
| unsigned int apg_bmp_write( const char* filename, unsigned char* pixels_ptr, int w, int h, unsigned int n_chans ) { |
| if ( !filename || !pixels_ptr ) { return 0; } |
| if ( 0 == w || 0 == h ) { return 0; } |
| if ( labs( w ) > _BMP_MAX_DIMS || labs( h ) > _BMP_MAX_DIMS ) { return 0; } |
| if ( n_chans != 3 && n_chans != 4 ) { return 0; } |
| |
| uint32_t height = labs( h ); |
| uint32_t width = labs( w ); |
| // work out if any padding how much to skip at end of each row |
| const size_t unpadded_row_sz = width * n_chans; |
| const size_t row_padding_sz = 0 == unpadded_row_sz % 4 ? 0 : 4 - unpadded_row_sz % 4; |
| const size_t row_sz = unpadded_row_sz + row_padding_sz; |
| const size_t dst_pixels_padded_sz = row_sz * height; |
| |
| const size_t dib_hdr_sz = sizeof( _bmp_dib_BITMAPINFOHEADER_t ); |
| _bmp_file_header_t file_hdr; |
| { |
| file_hdr.file_type[0] = 'B'; |
| file_hdr.file_type[1] = 'M'; |
| file_hdr.file_sz = _BMP_FILE_HDR_SZ + (uint32_t)dib_hdr_sz + (uint32_t)dst_pixels_padded_sz; |
| file_hdr.reserved1 = 0; |
| file_hdr.reserved2 = 0; |
| file_hdr.image_data_offset = _BMP_FILE_HDR_SZ + (uint32_t)dib_hdr_sz; |
| } |
| _bmp_dib_BITMAPINFOHEADER_t dib_hdr; |
| { |
| dib_hdr.this_header_sz = _BMP_MIN_DIB_HDR_SZ; // NOTE: must be 40 and not include the bitmask memory in size here |
| dib_hdr.w = w; |
| dib_hdr.h = h; |
| dib_hdr.n_planes = 1; |
| dib_hdr.bpp = 3 == n_chans ? 24 : 32; |
| dib_hdr.compression_method = 3 == n_chans ? BI_RGB : BI_BITFIELDS; |
| dib_hdr.image_uncompressed_sz = 0; |
| dib_hdr.horiz_pixels_per_meter = 0; |
| dib_hdr.vert_pixels_per_meter = 0; |
| dib_hdr.n_colours_in_palette = 0; |
| dib_hdr.n_important_colours = 0; |
| // big-endian masks. only used in BI_BITFIELDS and BI_ALPHABITFIELDS ( 16 and 32-bit images ) |
| // important note: GIMP stores BMP data in this array order for 32-bit: [A][B][G][R] |
| dib_hdr.bitmask_r = 0xFF000000; |
| dib_hdr.bitmask_g = 0x00FF0000; |
| dib_hdr.bitmask_b = 0x0000FF00; |
| } |
| |
| uint8_t* dst_pixels_ptr = malloc( dst_pixels_padded_sz ); |
| if ( !dst_pixels_ptr ) { return 0; } |
| { |
| size_t dst_byte_idx = 0; |
| uint8_t padding[4] = {0, 0, 0, 0}; |
| uint8_t rgba[4] = {0, 0, 0, 0}; |
| uint8_t bgra[4] = {0, 0, 0, 0}; |
| |
| for ( uint32_t row = 0; row < height; row++ ) { |
| size_t src_byte_idx = ( height - 1 - row ) * n_chans * width; |
| for ( uint32_t col = 0; col < width; col++ ) { |
| for ( uint32_t chan = 0; chan < n_chans; chan++ ) { rgba[chan] = pixels_ptr[src_byte_idx++]; } |
| if ( 3 == n_chans ) { |
| bgra[0] = rgba[2]; |
| bgra[1] = rgba[1]; |
| bgra[2] = rgba[0]; |
| } else { |
| /* NOTE(Anton) RGBA with alpha channel would be better supported with an extended DIB header */ |
| bgra[0] = rgba[3]; |
| bgra[1] = rgba[2]; |
| bgra[2] = rgba[1]; |
| bgra[3] = rgba[0]; // alpha |
| } |
| memcpy( &dst_pixels_ptr[dst_byte_idx], bgra, n_chans ); |
| dst_byte_idx += (size_t)n_chans; |
| } // endfor col |
| if ( row_padding_sz > 0 ) { |
| memcpy( &dst_pixels_ptr[dst_byte_idx], padding, row_padding_sz ); |
| dst_byte_idx += row_padding_sz; |
| } |
| } // endfor row |
| } |
| { |
| FILE* fp = fopen( filename, "wb" ); |
| if ( !fp ) { |
| free( dst_pixels_ptr ); |
| return 0; |
| } |
| if ( 1 != fwrite( &file_hdr, _BMP_FILE_HDR_SZ, 1, fp ) ) { |
| free( dst_pixels_ptr ); |
| fclose( fp ); |
| return 0; |
| } |
| if ( 1 != fwrite( &dib_hdr, dib_hdr_sz, 1, fp ) ) { |
| free( dst_pixels_ptr ); |
| fclose( fp ); |
| return 0; |
| } |
| if ( 1 != fwrite( dst_pixels_ptr, dst_pixels_padded_sz, 1, fp ) ) { |
| free( dst_pixels_ptr ); |
| fclose( fp ); |
| return 0; |
| } |
| fclose( fp ); |
| } |
| free( dst_pixels_ptr ); |
| |
| return 1; |
| } |
