// basisu_comp.h
// Copyright (C) 2019-2024 Binomial LLC. All Rights Reserved.
//
// Licensed under the Apache License, Version 2.0 (the "License");
// you may not use this file except in compliance with the License.
// You may obtain a copy of the License at
//
//    http://www.apache.org/licenses/LICENSE-2.0
//
// Unless required by applicable law or agreed to in writing, software
// distributed under the License is distributed on an "AS IS" BASIS,
// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
// See the License for the specific language governing permissions and
// limitations under the License.
#pragma once
#include "basisu_frontend.h"
#include "basisu_backend.h"
#include "basisu_basis_file.h"
#include "../transcoder/basisu_transcoder.h"
#include "basisu_uastc_enc.h"
#include "basisu_uastc_hdr_4x4_enc.h"
#include "basisu_astc_hdr_6x6_enc.h"

#define BASISU_LIB_VERSION 160
#define BASISU_LIB_VERSION_STRING "1.60"

#ifndef BASISD_SUPPORT_KTX2
	#error BASISD_SUPPORT_KTX2 is undefined
#endif
#ifndef BASISD_SUPPORT_KTX2_ZSTD
	#error BASISD_SUPPORT_KTX2_ZSTD is undefined
#endif

#if !BASISD_SUPPORT_KTX2
	#error BASISD_SUPPORT_KTX2 must be enabled when building the encoder. To reduce code size if KTX2 support is not needed, set BASISD_SUPPORT_KTX2_ZSTD to 0
#endif

namespace basisu
{
	struct opencl_context;
	typedef opencl_context* opencl_context_ptr;

	const uint32_t BASISU_MAX_SUPPORTED_TEXTURE_DIMENSION = 16384;

	// Allow block's color distance to increase by 1.5 while searching for an alternative nearby endpoint.
	const float BASISU_DEFAULT_ENDPOINT_RDO_THRESH = 1.5f; 
	
	// Allow block's color distance to increase by 1.25 while searching the selector history buffer for a close enough match.
	const float BASISU_DEFAULT_SELECTOR_RDO_THRESH = 1.25f; 

	const int BASISU_DEFAULT_QUALITY = 128;
	const float BASISU_DEFAULT_HYBRID_SEL_CB_QUALITY_THRESH = 2.0f;

	const uint32_t BASISU_MAX_IMAGE_DIMENSION = 16384;
	const uint32_t BASISU_QUALITY_MIN = 1;
	const uint32_t BASISU_QUALITY_MAX = 255;
	const uint32_t BASISU_MAX_ENDPOINT_CLUSTERS = basisu_frontend::cMaxEndpointClusters;
	const uint32_t BASISU_MAX_SELECTOR_CLUSTERS = basisu_frontend::cMaxSelectorClusters;

	const uint32_t BASISU_MAX_SLICES = 0xFFFFFF;

	const int BASISU_RDO_UASTC_DICT_SIZE_DEFAULT = 4096; // 32768;
	const int BASISU_RDO_UASTC_DICT_SIZE_MIN = 64;
	const int BASISU_RDO_UASTC_DICT_SIZE_MAX = 65536;

	struct image_stats
	{
		image_stats()
		{
			clear();
		}

		void clear()
		{
			m_filename.clear();
			m_width = 0;
			m_height = 0;
						
			m_basis_rgb_avg_psnr = 0.0f;
			m_basis_rgb_avg_log2_psnr = 0.0f;

			m_basis_rgba_avg_psnr = 0.0f;
			m_basis_a_avg_psnr = 0.0f;
			m_basis_luma_709_psnr = 0.0f;
			m_basis_luma_601_psnr = 0.0f;
			m_basis_luma_709_ssim = 0.0f;

			m_basis_rgb_avg_bc6h_psnr = 0.0f;
			m_basis_rgb_avg_bc6h_log2_psnr = 0.0f;

			m_bc7_rgb_avg_psnr = 0.0f;
			m_bc7_rgba_avg_psnr = 0.0f;
			m_bc7_a_avg_psnr = 0.0f;
			m_bc7_luma_709_psnr = 0.0f;
			m_bc7_luma_601_psnr = 0.0f;
			m_bc7_luma_709_ssim = 0.0f;
						
			m_best_etc1s_rgb_avg_psnr = 0.0f;
			m_best_etc1s_luma_709_psnr = 0.0f;
			m_best_etc1s_luma_601_psnr = 0.0f;
			m_best_etc1s_luma_709_ssim = 0.0f;

			m_opencl_failed = false;
		}

		std::string m_filename;
		uint32_t m_width;
		uint32_t m_height;

		// .basis/.ktx2 compressed (LDR: ETC1S or UASTC statistics, HDR: transcoded BC6H statistics)
		float m_basis_rgb_avg_psnr;
		float m_basis_rgb_avg_log2_psnr;

		float m_basis_rgba_avg_psnr;
		float m_basis_a_avg_psnr;
		float m_basis_luma_709_psnr;
		float m_basis_luma_601_psnr;
		float m_basis_luma_709_ssim;

		// UASTC HDR only.
		float m_basis_rgb_avg_bc6h_psnr;
		float m_basis_rgb_avg_bc6h_log2_psnr;

		// LDR: BC7 statistics
		float m_bc7_rgb_avg_psnr;
		float m_bc7_rgba_avg_psnr;
		float m_bc7_a_avg_psnr;
		float m_bc7_luma_709_psnr;
		float m_bc7_luma_601_psnr;
		float m_bc7_luma_709_ssim;
		
		// LDR: Highest achievable quality ETC1S statistics
		float m_best_etc1s_rgb_avg_psnr;
		float m_best_etc1s_luma_709_psnr;
		float m_best_etc1s_luma_601_psnr;
		float m_best_etc1s_luma_709_ssim;

		bool m_opencl_failed;
	};

	enum class hdr_modes
	{
		// standard but constrained ASTC HDR 4x4 tex data that can be rapidly transcoded to BC6H
		cUASTC_HDR_4X4, 
		// standard RDO optimized or non-RDO (highest quality) ASTC HDR 6x6 tex data that can be rapidly re-encoded to BC6H
		cASTC_HDR_6X6,
		// a custom intermediate format based off ASTC HDR that can be rapidly decoded straight to ASTC HDR or re-encoded to BC6H
		cASTC_HDR_6X6_INTERMEDIATE,
		cTotal
	};

	template<bool def>
	struct bool_param
	{
		bool_param() :
			m_value(def),
			m_changed(false)
		{
		}

		void clear()
		{
			m_value = def;
			m_changed = false;
		}

		operator bool() const
		{
			return m_value;
		}

		bool operator= (bool v)
		{
			m_value = v;
			m_changed = true;
			return m_value;
		}

		bool was_changed() const { return m_changed; }
		void set_changed(bool flag) { m_changed = flag; }

		bool m_value;
		bool m_changed;
	};

	template<typename T>
	struct param
	{
		param(T def, T min_v, T max_v) :
			m_value(def),
			m_def(def),
			m_min(min_v),
			m_max(max_v),
			m_changed(false)
		{
		}

		void clear()
		{
			m_value = m_def;
			m_changed = false;
		}

		operator T() const
		{
			return m_value;
		}

		T operator= (T v)
		{
			m_value = clamp<T>(v, m_min, m_max);
			m_changed = true;
			return m_value;
		}

		T operator *= (T v)
		{
			m_value *= v;
			m_changed = true;
			return m_value;
		}

		bool was_changed() const { return m_changed; }
		void set_changed(bool flag) { m_changed = flag; }

		T m_value;
		T m_def;
		T m_min;
		T m_max;
		bool m_changed;
	};

	struct basis_compressor_params
	{
		basis_compressor_params() :
			m_compression_level((int)BASISU_DEFAULT_COMPRESSION_LEVEL, 0, (int)BASISU_MAX_COMPRESSION_LEVEL),
			m_selector_rdo_thresh(BASISU_DEFAULT_SELECTOR_RDO_THRESH, 0.0f, 1e+10f),
			m_endpoint_rdo_thresh(BASISU_DEFAULT_ENDPOINT_RDO_THRESH, 0.0f, 1e+10f),
			m_mip_scale(1.0f, .000125f, 4.0f),
			m_mip_smallest_dimension(1, 1, 16384),
			m_etc1s_max_endpoint_clusters(512),
			m_etc1s_max_selector_clusters(512),
			m_etc1s_quality_level(-1),
			m_pack_uastc_ldr_4x4_flags(cPackUASTCLevelDefault),
			m_rdo_uastc_ldr_4x4_quality_scalar(1.0f, 0.001f, 50.0f),
			m_rdo_uastc_ldr_4x4_dict_size(BASISU_RDO_UASTC_DICT_SIZE_DEFAULT, BASISU_RDO_UASTC_DICT_SIZE_MIN, BASISU_RDO_UASTC_DICT_SIZE_MAX),
			m_rdo_uastc_ldr_4x4_max_smooth_block_error_scale(UASTC_RDO_DEFAULT_SMOOTH_BLOCK_MAX_ERROR_SCALE, 1.0f, 300.0f),
			m_rdo_uastc_ldr_4x4_smooth_block_max_std_dev(UASTC_RDO_DEFAULT_MAX_SMOOTH_BLOCK_STD_DEV, .01f, 65536.0f),
			m_rdo_uastc_ldr_4x4_max_allowed_rms_increase_ratio(UASTC_RDO_DEFAULT_MAX_ALLOWED_RMS_INCREASE_RATIO, .01f, 100.0f),
			m_rdo_uastc_ldr_4x4_skip_block_rms_thresh(UASTC_RDO_DEFAULT_SKIP_BLOCK_RMS_THRESH, .01f, 100.0f),
			m_resample_width(0, 1, 16384),
			m_resample_height(0, 1, 16384),
			m_resample_factor(0.0f, .00125f, 100.0f),
			m_ktx2_uastc_supercompression(basist::KTX2_SS_NONE),
			m_ktx2_zstd_supercompression_level(6, INT_MIN, INT_MAX),
			m_ldr_hdr_upconversion_nit_multiplier(0.0f, 0.0f, basist::MAX_HALF_FLOAT),
			m_ldr_hdr_upconversion_black_bias(0.0f, 0.0f, 1.0f),
			m_pJob_pool(nullptr)
		{
			clear();
		}

		void clear()
		{
			m_uastc.clear();
			m_hdr.clear();
			m_hdr_mode = hdr_modes::cUASTC_HDR_4X4;

			m_use_opencl.clear();
			m_status_output.clear();

			m_source_filenames.clear();
			m_source_alpha_filenames.clear();

			m_source_images.clear();
			m_source_mipmap_images.clear();

			m_out_filename.clear();

			m_y_flip.clear();
			m_debug.clear();
			m_validate_etc1s.clear();
			m_debug_images.clear();
			m_perceptual.clear();
			m_no_selector_rdo.clear();
			m_selector_rdo_thresh.clear();
			m_read_source_images.clear();
			m_write_output_basis_or_ktx2_files.clear();
			m_compression_level.clear();
			m_compute_stats.clear();
			m_print_stats.clear();
			m_check_for_alpha.clear();
			m_force_alpha.clear();
			m_multithreading.clear();
			m_swizzle[0] = 0;
			m_swizzle[1] = 1;
			m_swizzle[2] = 2;
			m_swizzle[3] = 3;
			m_renormalize.clear();
			m_disable_hierarchical_endpoint_codebooks.clear();

			m_no_endpoint_rdo.clear();
			m_endpoint_rdo_thresh.clear();
						
			m_mip_gen.clear();
			m_mip_scale.clear();
			m_mip_filter = "kaiser";
			m_mip_scale = 1.0f;
			m_mip_srgb.clear();
			m_mip_premultiplied.clear();
			m_mip_renormalize.clear();
			m_mip_wrapping.clear();
			m_mip_fast.clear();
			m_mip_smallest_dimension.clear();

			m_etc1s_max_endpoint_clusters = 0;
			m_etc1s_max_selector_clusters = 0;
			m_etc1s_quality_level = -1;

			m_tex_type = basist::cBASISTexType2D;
			m_userdata0 = 0;
			m_userdata1 = 0;
			m_us_per_frame = 0;

			m_pack_uastc_ldr_4x4_flags = cPackUASTCLevelDefault;
			m_rdo_uastc_ldr_4x4.clear();
			m_rdo_uastc_ldr_4x4_quality_scalar.clear();
			m_rdo_uastc_ldr_4x4_max_smooth_block_error_scale.clear();
			m_rdo_uastc_ldr_4x4_smooth_block_max_std_dev.clear();
			m_rdo_uastc_ldr_4x4_max_allowed_rms_increase_ratio.clear();
			m_rdo_uastc_ldr_4x4_skip_block_rms_thresh.clear();
			m_rdo_uastc_ldr_4x4_favor_simpler_modes_in_rdo_mode.clear();
			m_rdo_uastc_ldr_4x4_multithreading.clear();

			m_resample_width.clear();
			m_resample_height.clear();
			m_resample_factor.clear();

			m_pGlobal_codebooks = nullptr;

			m_create_ktx2_file.clear();
			m_ktx2_uastc_supercompression = basist::KTX2_SS_NONE;
			m_ktx2_key_values.clear();
			m_ktx2_zstd_supercompression_level.clear();
			m_ktx2_srgb_transfer_func.clear();

			m_validate_output_data.clear();

			m_ldr_hdr_upconversion_srgb_to_linear.clear();

			m_hdr_favor_astc.clear();
			
			m_uastc_hdr_4x4_options.init();
			m_astc_hdr_6x6_options.clear();

			m_ldr_hdr_upconversion_nit_multiplier.clear();
			m_ldr_hdr_upconversion_black_bias.clear();
			
			m_pJob_pool = nullptr;
		}

		// Configures the compressor's mode by setting the proper parameters (which were preserved for backwards compatibility with old code).
		void set_format_mode(basist::basis_tex_format m)
		{
			switch (m)
			{
			case basist::basis_tex_format::cETC1S:
			{
				m_hdr = false;
				m_uastc = false;
				m_hdr_mode = hdr_modes::cUASTC_HDR_4X4; // doesn't matter
				break;
			}
			case basist::basis_tex_format::cUASTC4x4:
			{
				m_hdr = false;
				m_uastc = true;
				m_hdr_mode = hdr_modes::cUASTC_HDR_4X4; // doesn't matter
				break;
			}
			case basist::basis_tex_format::cUASTC_HDR_4x4:
			{
				m_hdr = true;
				m_uastc = true;
				m_hdr_mode = hdr_modes::cUASTC_HDR_4X4;
				break;
			}
			case basist::basis_tex_format::cASTC_HDR_6x6:
			{
				m_hdr = true;
				m_uastc = true;
				m_hdr_mode = hdr_modes::cASTC_HDR_6X6;
				break;
			}
			case basist::basis_tex_format::cASTC_HDR_6x6_INTERMEDIATE:
			{
				m_hdr = true;
				m_uastc = true;
				m_hdr_mode = hdr_modes::cASTC_HDR_6X6_INTERMEDIATE;
				break;
			}
			default:
				assert(0);
				break;
			}
		}

		// By default we generate LDR ETC1S data. 
		// if m_uastc is true but m_hdr is not true, we generate UASTC 4x4 LDR data (8bpp with or without RDO).
		// if m_uastc is true and m_hdr is true, we generate 4x4 or 6x6 HDR data (either standard ASTC, constrained ASTC, RDO ASTC, or intermediate), controlled by m_hdr_mode.
		
		// True to generate UASTC .basis/.KTX2 file data, otherwise ETC1S.
		// Should be true for any non-ETC1S format (UASTC 4x4 LDR, UASTC 4x4 HDR, RDO ASTC 6x6 HDR, and ASTC 6x6 HDR intermediate).
		bool_param<false> m_uastc;

		// Set m_hdr to true to switch to UASTC HDR mode. m_hdr_mode then controls which format is output.
		// m_hdr_mode then controls which format is output (4x4, 6x6, or 6x6 intermediate).
		bool_param<false> m_hdr;

		// If m_hdr is true, this specifies which mode we operate in (currently UASTC 4x4 HDR or ASTC 6x6 HDR). Defaults to UASTC 4x4 HDR for backwards compatibility.
		hdr_modes m_hdr_mode;
				
		bool_param<false> m_use_opencl;

		// If m_read_source_images is true, m_source_filenames (and optionally m_source_alpha_filenames) contains the filenames of PNG etc. images to read. 
		// Otherwise, the compressor processes the images in m_source_images or m_source_images_hdr.
		basisu::vector<std::string> m_source_filenames;
		basisu::vector<std::string> m_source_alpha_filenames;
		
		basisu::vector<image> m_source_images;
		
		basisu::vector<imagef> m_source_images_hdr;
				
		// Stores mipmaps starting from level 1. Level 0 is still stored in m_source_images, as usual.
		// If m_source_mipmaps isn't empty, automatic mipmap generation isn't done. m_source_mipmaps.size() MUST equal m_source_images.size() or the compressor returns an error.
		// The compressor applies the user-provided swizzling (in m_swizzle) to these images.
		basisu::vector< basisu::vector<image> > m_source_mipmap_images;

		basisu::vector< basisu::vector<imagef> > m_source_mipmap_images_hdr;
						
		// Filename of the output basis/ktx2 file
		std::string m_out_filename;

		// The params are done this way so we can detect when the user has explictly changed them.

		// Flip images across Y axis
		bool_param<false> m_y_flip;

		// If true, the compressor will print basis status to stdout during compression.
		bool_param<true> m_status_output;
		
		// Output debug information during compression
		bool_param<false> m_debug;
		bool_param<false> m_validate_etc1s;
		
		// m_debug_images is pretty slow
		bool_param<false> m_debug_images;

		// ETC1S compression level, from 0 to BASISU_MAX_COMPRESSION_LEVEL (higher is slower). 
		// This parameter controls numerous internal encoding speed vs. compression efficiency/performance tradeoffs.
		// Note this is NOT the same as the ETC1S quality level, and most users shouldn't change this.
		param<int> m_compression_level;
						
		// Use perceptual sRGB colorspace metrics instead of linear
		bool_param<true> m_perceptual;

		// Disable selector RDO, for faster compression but larger files
		bool_param<false> m_no_selector_rdo;
		param<float> m_selector_rdo_thresh;

		bool_param<false> m_no_endpoint_rdo;
		param<float> m_endpoint_rdo_thresh;

		// Read source images from m_source_filenames/m_source_alpha_filenames
		bool_param<false> m_read_source_images;

		// Write the output basis/ktx2 file to disk using m_out_filename
		bool_param<false> m_write_output_basis_or_ktx2_files;
								
		// Compute and display image metrics 
		bool_param<false> m_compute_stats;

		// Print stats to stdout, if m_compute_stats is true.
		bool_param<true> m_print_stats;
		
		// Check to see if any input image has an alpha channel, if so then the output basis/ktx2 file will have alpha channels
		bool_param<true> m_check_for_alpha;
		
		// Always put alpha slices in the output basis/ktx2 file, even when the input doesn't have alpha
		bool_param<false> m_force_alpha; 
		bool_param<true> m_multithreading;
		
		// Split the R channel to RGB and the G channel to alpha, then write a basis/ktx2 file with alpha channels
		uint8_t m_swizzle[4];

		bool_param<false> m_renormalize;

		// If true the front end will not use 2 level endpoint codebook searching, for slightly higher quality but much slower execution.
		// Note some m_compression_level's disable this automatically.
		bool_param<false> m_disable_hierarchical_endpoint_codebooks;
						
		// mipmap generation parameters
		bool_param<false> m_mip_gen;
		param<float> m_mip_scale;
		std::string m_mip_filter;
		bool_param<false> m_mip_srgb;
		bool_param<true> m_mip_premultiplied; // not currently supported
		bool_param<false> m_mip_renormalize; 
		bool_param<true> m_mip_wrapping;
		bool_param<true> m_mip_fast;
		param<int> m_mip_smallest_dimension;
						
		// ETC1S codebook size (quality) control. 
		// If m_etc1s_quality_level != -1, it controls the quality level. It ranges from [1,255] or [BASISU_QUALITY_MIN, BASISU_QUALITY_MAX].
		// Otherwise m_max_endpoint_clusters/m_max_selector_clusters controls the codebook sizes directly.
		uint32_t m_etc1s_max_endpoint_clusters;
		uint32_t m_etc1s_max_selector_clusters;
		int m_etc1s_quality_level;
		
		// m_tex_type, m_userdata0, m_userdata1, m_framerate - These fields go directly into the .basis file header.
		basist::basis_texture_type m_tex_type;
		uint32_t m_userdata0;
		uint32_t m_userdata1;
		uint32_t m_us_per_frame;

		// UASTC LDR 4x4 parameters
		// cPackUASTCLevelDefault, etc.
		uint32_t m_pack_uastc_ldr_4x4_flags;
		bool_param<false> m_rdo_uastc_ldr_4x4;
		param<float> m_rdo_uastc_ldr_4x4_quality_scalar;
		param<int> m_rdo_uastc_ldr_4x4_dict_size;
		param<float> m_rdo_uastc_ldr_4x4_max_smooth_block_error_scale;
		param<float> m_rdo_uastc_ldr_4x4_smooth_block_max_std_dev;
		param<float> m_rdo_uastc_ldr_4x4_max_allowed_rms_increase_ratio;
		param<float> m_rdo_uastc_ldr_4x4_skip_block_rms_thresh;
		bool_param<true> m_rdo_uastc_ldr_4x4_favor_simpler_modes_in_rdo_mode;
		bool_param<true> m_rdo_uastc_ldr_4x4_multithreading;

		param<int> m_resample_width;
		param<int> m_resample_height;
		param<float> m_resample_factor;

		const basist::basisu_lowlevel_etc1s_transcoder *m_pGlobal_codebooks;

		// KTX2 specific parameters.
		// Internally, the compressor always creates a .basis file then it converts that lossless to KTX2.
		bool_param<false> m_create_ktx2_file;
		basist::ktx2_supercompression m_ktx2_uastc_supercompression;
		basist::ktx2_transcoder::key_value_vec m_ktx2_key_values;
		param<int> m_ktx2_zstd_supercompression_level;
		bool_param<false> m_ktx2_srgb_transfer_func;

		uastc_hdr_4x4_codec_options m_uastc_hdr_4x4_options;
		astc_6x6_hdr::astc_hdr_6x6_global_config m_astc_hdr_6x6_options;

		bool_param<false> m_validate_output_data;

		// LDR->HDR upconversion parameters.
		// 
		// If true, LDR images (such as PNG) will be converted to normalized [0,1] linear light (via a sRGB->Linear conversion), or absolute luminance (nits or candelas per meter squared), and then processed as HDR. 
		// Otherwise, LDR images are assumed to already be in linear light (i.e. they don't use the sRGB transfer function).
		bool_param<true> m_ldr_hdr_upconversion_srgb_to_linear;
		
		// m_ldr_hdr_upconversion_nit_multiplier is only used when loading SDR/LDR images and compressing to an HDR output format.
		// By default m_ldr_hdr_upconversion_nit_multiplier is 0. It's an override for the default.
		// When loading LDR images, a default multiplier of 1.0 will be used in UASTC 4x4 HDR mode. Partially for backwards compatibility with previous library releases, and also because it doesn't really matter with this encoder what the multiplier is.
		// With the 6x6 HDR encoder it does matter because it expects inputs in absolute nits, so the LDR upconversion luminance multiplier default will be 100 nits. (Most SDR monitors were/are 80-100 nits or so.)
		param<float> m_ldr_hdr_upconversion_nit_multiplier;

		// The optional sRGB space bias to use during LDR->HDR upconversion. Should be between [0,.49] or so. Only applied on black (0.0) color components.
		// Defaults to no bias (0.0f).
		param<float> m_ldr_hdr_upconversion_black_bias;

		// If true, ASTC HDR quality is favored more than BC6H quality. Otherwise it's a rough balance.
		bool_param<false> m_hdr_favor_astc;
						
		job_pool *m_pJob_pool;
	};

	// Important: basisu_encoder_init() MUST be called first before using this class.
	class basis_compressor
	{
		BASISU_NO_EQUALS_OR_COPY_CONSTRUCT(basis_compressor);

	public:
		basis_compressor();
		~basis_compressor();

		// Note it *should* be possible to call init() multiple times with different inputs, but this scenario isn't well tested. Ideally, create 1 object, compress, then delete it.
		bool init(const basis_compressor_params &params);
		
		enum error_code
		{
			cECSuccess = 0,
			cECFailedInitializing,
			cECFailedReadingSourceImages,
			cECFailedValidating,
			cECFailedEncodeUASTC,
			cECFailedFrontEnd,
			cECFailedFontendExtract,
			cECFailedBackend,
			cECFailedCreateBasisFile,
			cECFailedWritingOutput,
			cECFailedUASTCRDOPostProcess,
			cECFailedCreateKTX2File
		};

		error_code process();

		// The output .basis file will always be valid of process() succeeded.
		const uint8_vec &get_output_basis_file() const { return m_output_basis_file; }
		
		// The output .ktx2 file will only be valid if m_create_ktx2_file was true and process() succeeded.
		const uint8_vec& get_output_ktx2_file() const { return m_output_ktx2_file; }

		const basisu::vector<image_stats> &get_stats() const { return m_stats; }

		uint32_t get_basis_file_size() const { return m_basis_file_size; }
		double get_basis_bits_per_texel() const { return m_basis_bits_per_texel; }
		
		bool get_any_source_image_has_alpha() const { return m_any_source_image_has_alpha; }

		bool get_opencl_failed() const { return m_opencl_failed; }
								
	private:
		basis_compressor_params m_params;
				
		opencl_context_ptr m_pOpenCL_context;

		basist::basis_tex_format m_fmt_mode;
		
		basisu::vector<image> m_slice_images;
		basisu::vector<imagef> m_slice_images_hdr;

		basisu::vector<image_stats> m_stats;

		uint32_t m_basis_file_size;
		double m_basis_bits_per_texel;
						
		basisu_backend_slice_desc_vec m_slice_descs;

		uint32_t m_total_blocks;
		
		basisu_frontend m_frontend;

		// These are 4x4 blocks.
		pixel_block_vec m_source_blocks;
		pixel_block_hdr_vec m_source_blocks_hdr;

		basisu::vector<gpu_image> m_frontend_output_textures;

		basisu::vector<gpu_image> m_best_etc1s_images;
		basisu::vector<image> m_best_etc1s_images_unpacked;

		basisu_backend m_backend;

		basisu_file m_basis_file;

		basisu::vector<gpu_image> m_decoded_output_textures;			// BC6H in HDR mode
		basisu::vector<image> m_decoded_output_textures_unpacked;
		
		basisu::vector<gpu_image> m_decoded_output_textures_bc7;
		basisu::vector<image> m_decoded_output_textures_unpacked_bc7;

		basisu::vector<imagef> m_decoded_output_textures_bc6h_hdr_unpacked;	// BC6H in HDR mode

		basisu::vector<gpu_image> m_decoded_output_textures_astc_hdr;
		basisu::vector<imagef> m_decoded_output_textures_astc_hdr_unpacked;

		uint8_vec m_output_basis_file;
		uint8_vec m_output_ktx2_file;
		
		basisu::vector<gpu_image> m_uastc_slice_textures;
		basisu_backend_output m_uastc_backend_output;

		// The amount the HDR input has to be scaled up in case it had to be rescaled to fit into half floats.
		float m_hdr_image_scale; 
		
		// The upconversion multiplier used to load LDR images in HDR mode.
		float m_ldr_to_hdr_upconversion_nit_multiplier;
		
		// True if any loaded source images were LDR and upconverted to HDR.
		bool m_upconverted_any_ldr_images;

		bool m_any_source_image_has_alpha;

		bool m_opencl_failed;

		void check_for_hdr_inputs();
		bool sanity_check_input_params();
		void clean_hdr_image(imagef& src_img);
		bool read_dds_source_images();
		bool read_source_images();
		bool extract_source_blocks();
		bool process_frontend();
		bool extract_frontend_texture_data();
		bool process_backend();
		bool create_basis_file_and_transcode();
		bool write_hdr_debug_images(const char* pBasename, const imagef& img, uint32_t width, uint32_t height);
		bool write_output_files_and_compute_stats();
		error_code encode_slices_to_astc_6x6_hdr();
		error_code encode_slices_to_uastc_4x4_hdr();
		error_code encode_slices_to_uastc_4x4_ldr();
		bool generate_mipmaps(const imagef& img, basisu::vector<imagef>& mips, bool has_alpha);
		bool generate_mipmaps(const image &img, basisu::vector<image> &mips, bool has_alpha);
		bool validate_texture_type_constraints();
		bool validate_ktx2_constraints();
		bool get_dfd(uint8_vec& dfd, const basist::ktx2_header& hdr);
		bool create_ktx2_file();
		void pick_format_mode();

		uint32_t get_block_width() const
		{
			if (m_params.m_hdr)
			{
				switch (m_params.m_hdr_mode)
				{
				case hdr_modes::cASTC_HDR_6X6:
				case hdr_modes::cASTC_HDR_6X6_INTERMEDIATE:
					return 6;
				default:
					break;
				}
			}
			return 4;
		}

		uint32_t get_block_height() const
		{
			if (m_params.m_hdr)
			{
				switch (m_params.m_hdr_mode)
				{
				case hdr_modes::cASTC_HDR_6X6:
				case hdr_modes::cASTC_HDR_6X6_INTERMEDIATE:
					return 6;
				default:
					break;
				}
			}
			return 4;
		}
	};
				
	// Alternative simple C-style wrapper API around the basis_compressor class. 
	// This doesn't expose every encoder feature, but it's enough to get going.
	// Important: basisu_encoder_init() MUST be called first before calling these functions.
	//
	// Input parameters:
	//   source_images: Array of "image" objects, one per mipmap level, largest mipmap level first.
	// OR
	//   pImageRGBA: pointer to a 32-bpp RGBx or RGBA raster image, R first in memory, A last. Top scanline first in memory.
	//   width/height/pitch_in_pixels: dimensions of pImageRGBA
	//   
	// flags_and_quality: Combination of the above flags logically OR'd with the ETC1S or UASTC level, i.e. "cFlagSRGB | cFlagGenMipsClamp | cFlagThreaded | 128" or "cFlagSRGB | cFlagGenMipsClamp | cFlagUASTC | cFlagThreaded | cPackUASTCLevelDefault".
	//	  In ETC1S mode, the lower 8-bits are the ETC1S quality level which ranges from [1,255] (higher=better quality/larger files)
	//	  In UASTC mode, the lower 8-bits are the UASTC LDR/HDR pack level (see cPackUASTCLevelFastest, etc.). Fastest/lowest quality is 0, so be sure to set it correctly. Valid values are [0,4] for both LDR/HDR.
	//	  In UASTC mode, be sure to set this, otherwise it defaults to 0 (fastest/lowest quality).
	// 
	// uastc_rdo_quality: Float UASTC RDO quality level (0=no change, higher values lower quality but increase compressibility, initially try .5-1.5)
	// 
	// pSize: Returns the output data's compressed size in bytes
	// 
	// Return value is the compressed .basis or .ktx2 file data, or nullptr on failure. Must call basis_free() to free it.
	enum
	{
		cFlagUseOpenCL = 1 << 8,		// use OpenCL if available
		cFlagThreaded = 1 << 9,			// use multiple threads for compression
		cFlagDebug = 1 << 10,			// enable debug output

		cFlagKTX2 = 1 << 11,			// generate a KTX2 file
		cFlagKTX2UASTCSuperCompression = 1 << 12, // use KTX2 Zstd supercompression on UASTC files

		cFlagSRGB = 1 << 13,			// input texture is sRGB, use perceptual colorspace metrics, also use sRGB filtering during mipmap gen, and also sets KTX2 output transfer func to sRGB
		cFlagGenMipsClamp = 1 << 14,	// generate mipmaps with clamp addressing
		cFlagGenMipsWrap = 1 << 15,		// generate mipmaps with wrap addressing
		
		cFlagYFlip = 1 << 16,			// flip source image on Y axis before compression
		
		cFlagUASTCRDO = 1 << 17,		// use RDO postprocessing when generating UASTC files (must set uastc_rdo_quality to the quality scalar)
		
		cFlagPrintStats = 1 << 18,		// print image stats to stdout
		cFlagPrintStatus = 1 << 19,		// print status to stdout
		
		cFlagDebugImages = 1 << 20,		// enable status output

		cFlagREC2020 = 1 << 21			// ASTC 6x6 modes: treat input as REC 2020 vs. the default 709
	};

	// This function accepts an array of source images. 
	// If more than one image is provided, it's assumed the images form a mipmap pyramid and automatic mipmap generation is disabled.
	// Returns a pointer to the compressed .basis or .ktx2 file data. *pSize is the size of the compressed data. 
	// Important: The returned block MUST be manually freed using basis_free_data().
	// basisu_encoder_init() MUST be called first!
	// LDR version. To compress the LDR source image as HDR: Use the cFlagHDR flag.
	void* basis_compress(
		basist::basis_tex_format mode,
		const basisu::vector<image> &source_images,
		uint32_t flags_and_quality, float uastc_rdo_quality,
		size_t* pSize,
		image_stats* pStats = nullptr);

	// HDR-only version.
	// Important: The returned block MUST be manually freed using basis_free_data().
	void* basis_compress(
		basist::basis_tex_format mode,
		const basisu::vector<imagef>& source_images_hdr,
		uint32_t flags_and_quality, float lambda,
		size_t* pSize,
		image_stats* pStats = nullptr);

	// This function only accepts a single LDR source image. It's just a wrapper for basis_compress() above.
	// Important: The returned block MUST be manually freed using basis_free_data().
	void* basis_compress(
		basist::basis_tex_format mode,
		const uint8_t* pImageRGBA, uint32_t width, uint32_t height, uint32_t pitch_in_pixels,
		uint32_t flags_and_quality, float uastc_rdo_quality,
		size_t* pSize,
		image_stats* pStats = nullptr);

	// Frees the dynamically allocated file data returned by basis_compress().
	// This MUST be called on the pointer returned by basis_compress() when you're done with it.
	void basis_free_data(void* p);

	// Runs a short benchmark using synthetic image data to time OpenCL encoding vs. CPU encoding, with multithreading enabled.
	// Returns true if opencl is worth using on this system, otherwise false.
	// If pOpenCL_failed is not null, it will be set to true if OpenCL encoding failed *on this particular machine/driver/BasisU version* and the encoder falled back to CPU encoding.
	// basisu_encoder_init() MUST be called first. If OpenCL support wasn't enabled this always returns false.
	bool basis_benchmark_etc1s_opencl(bool *pOpenCL_failed = nullptr);

	// Parallel compression API
	struct parallel_results
	{
		double m_total_time;
		basis_compressor::error_code m_error_code;
		uint8_vec m_basis_file;
		uint8_vec m_ktx2_file;
		basisu::vector<image_stats> m_stats;
		double m_basis_bits_per_texel;
		bool m_any_source_image_has_alpha;

		parallel_results() 
		{
			clear();
		}

		void clear()
		{
			m_total_time = 0.0f;
			m_error_code = basis_compressor::cECFailedInitializing;
			m_basis_file.clear();
			m_ktx2_file.clear();
			m_stats.clear();
			m_basis_bits_per_texel = 0.0f;
			m_any_source_image_has_alpha = false;
		}
	};
		
	// Compresses an array of input textures across total_threads threads using the basis_compressor class.
	// Compressing multiple textures at a time is substantially more efficient than just compressing one at a time.
	// total_threads must be >= 1.
	bool basis_parallel_compress(
		uint32_t total_threads,
		const basisu::vector<basis_compressor_params> &params_vec,
		basisu::vector< parallel_results > &results_vec);
		
} // namespace basisu