blob: a4eb92f5c1d3f02068bfc04f22698fad4ea628e7 [file] [log] [blame] [view]
# 2D Models for Lasercutting
This directory contains the the 2D model files in SVG format for
laser-cut designs to house a Raspberry Pi (RPi) and Android device
for testing.
The units of all models are in millimeters (mm). This is relevant when
importing them into a tool like Tinkercad.
The holder is designed to hold a RPi in this specific case:
http://www.amazon.com/SB-Components-Clear-Case-Raspberry/dp/B00MQLB1N6
and a Power Over Ethernet (POE) adapter like this:
https://www.amazon.com/UCTRONICS-802-3af-Splitter-Ethernet-Raspberry/dp/B01MDLUSE7
![Image of Assembled Rack](./Assembled_laser_cut_rack.jpg)
The side pieces fit into the base and should be secured by hot glue or adhesive.
These files can be edited with software like Tinkercad, Inkscape, or any other
SVG editor.
# Contents:
24x12_set.\*.svg : A full print set of the pieces needed to make a single rack on a
24x12 inch piece of material.
18xside._.svg + 4xbase._.svg: By printing 2 of the 18x and 1 of the 4x sheets, enough
pieces will be printed to make 4 racks (enough for 16
RPIs and devices).
base.\*.svg : The base piece. Has holes enough for 4 slots.
side.\*.svg : The side piece. Fits into the holes in the base. Has slots cut
out for better airflow.